Overclock.net › Forums › Cooling › Water Cooling › OCN Water Cooling Club And Picture Gallery
New Posts  All Forums:Forum Nav:

OCN Water Cooling Club And Picture Gallery - Page 9997

post #99961 of 107047
@DrFreeman35@

Water is over essentially.

To the Community. The SMA8 is in it's new home safe and sound. Monitors still have yet to be tried. Keep your fingers crossed.

TCO
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
post #99962 of 107047
Quote:
Originally Posted by TheCautiousOne View Post

@DrFreeman35@

Water is over essentially.

To the Community. The SMA8 is in it's new home safe and sound. Monitors still have yet to be tried. Keep your fingers crossed.

TCO

Good to hear, keep us posted. Hopefully those monitors start up with no issues.
JiX
(22 items)
 
  
CPUMotherboardGraphicsGraphics
i7-6850k Rampage V Edition 10 Evga GTX 1080 FTW2 Evga GTX 1080 FTW2 
RAMHard DriveHard DriveHard Drive
Corsair Dominator Platinum 32gb (4x8gb) 2800Mhz Samsung 960 Pro 512gb Samsung 850 Pro 1TB Samsung 850 Pro 1TB 
CoolingCoolingOSMonitor
EK Predator XLC 360 Corsair ML 120 Pro LED Windows 10 Pro Asus ROG PG348Q 
MonitorKeyboardPowerCase
BenQ XL 2730z Corsair K95 RGB Platinum Corsair ax1200i Caselabs SMA8 
MouseMouse PadAudioAudio
Corsair M65 RGB PRO Corsair MM300 Astro A40 Senheisser HD650 
AudioAudio
Schiit Lyr 2 Schiit Bifrost 
  hide details  
Reply
JiX
(22 items)
 
  
CPUMotherboardGraphicsGraphics
i7-6850k Rampage V Edition 10 Evga GTX 1080 FTW2 Evga GTX 1080 FTW2 
RAMHard DriveHard DriveHard Drive
Corsair Dominator Platinum 32gb (4x8gb) 2800Mhz Samsung 960 Pro 512gb Samsung 850 Pro 1TB Samsung 850 Pro 1TB 
CoolingCoolingOSMonitor
EK Predator XLC 360 Corsair ML 120 Pro LED Windows 10 Pro Asus ROG PG348Q 
MonitorKeyboardPowerCase
BenQ XL 2730z Corsair K95 RGB Platinum Corsair ax1200i Caselabs SMA8 
MouseMouse PadAudioAudio
Corsair M65 RGB PRO Corsair MM300 Astro A40 Senheisser HD650 
AudioAudio
Schiit Lyr 2 Schiit Bifrost 
  hide details  
Reply
post #99963 of 107047
Quote:
Originally Posted by DrFreeman35 View Post

Good to hear, keep us posted. Hopefully those monitors start up with no issues.

Will Do. Won't have internet in the new apartment until Next Tues. But I will boot up the PC to see how many problems I encounter (Or Don't Encounter hopefully)

TCO
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
I7 5930K @ 4.5Ghz Asus Rampage V  GTX 980  GTX 980 
RAMRAMHard DriveHard Drive
Corsair Dominator Platinum 2666mhz DDR4 4 Gb Q... Dominator Light Bar Kits x 2 Crucial 240 SSD  Seagate 7200 Rpm Baracuda 
Hard DriveHard DriveHard DriveCooling
Seagate 7200 Rpm Baracuda Crucial M500 512 SSD Crucial M500 480 SSD EK 480mm Coolstream XTX x 2 
CoolingCoolingCoolingCooling
Tons of Fittings Supremacy Evo Copper EK  XSPC 240mm Radiator V3 x 2 Swiftech MCP35X PMW Pump DDC x 2 
CoolingCoolingCoolingCooling
EK Rampage V Mosfet WaterBlock Original CSQ NB Eloops B12 - 2 1300rpm  Phobia 8way 4pin Fan Controller x 2 Ek Single Link CSQ Bridge x 2 
CoolingCoolingCoolingCooling
Bitspower Z Tank (Clear) 250mm x 2 980 WaterBlocks x 2 Ek DDC Pump Top (Acrylic) x 2 Primochill 3/8" x 1/2" OD Clear Tubing 
CoolingCoolingOSMonitor
Bitspower 12mm Acyrlic Tubing 19" x 4  XSPC 3/8" x 1/2" Compression Fittings x 12 Windows 7 Professional 64 Bit Crossover 324K 
MonitorPowerCaseOther
Qnix 2710 Perfect Pixel 1440p  EVGA 1300 G2 CaseLabs SMA8 Darkside 12" Led Lighting  
CPUMotherboardGraphicsRAM
i7 7700k Asus Strix Z270i Gaming GALAX 980TI HOF Corsair Dominator Platinum DDR4 2400  
Hard DriveCoolingCoolingCooling
Crucial 512 SSD EK Supremacy EVO White Bitspower 150ml Reservoir POM White x 2 Swiftech 18w DDC x 2 
CoolingCoolingCoolingCooling
Bitspower 980ti HOF Waterblock (Clear)  EK SE 240mm Slim Radiator EK XE 240mm Radiator x 2 EK DDC Plexi top x 2  
OSKeyboardPowerCase
Windows 7 Professional NEX Moba White Pro EVGA 650 G2 Caselabs S3 
  hide details  
Reply
post #99964 of 107047
I am about to work a lot with "normall push-in" fittings. Both for my new project and the new Monsoon fittings I got.

Right now I only have experience from Monsoon's hardline with UV-glue stuff, which isn't very well, and I failed hard, because, yes it's leaking.


So I wonder, have anyone failed with normal compression fittings? (Yes, of course rigid tubing). I don't see anyone reporting they ever have any leaks or anything? rolleyes.gif



And I also wonder how in the easiest way measure and mounts the tubing.

Let's say you have two pieces that are mounted, how do you get the tubing in between, like the picture down below. tongue.gif

post #99965 of 107047
I had a small leak with monsoon hard fittings (the old econ fittings and rigid tubing) but that was user error. I didn't tighten the fitting down enough. I tried finger tight but ended up having to use the 'spanner'.

Re measuring ... I measured the 'lip' on the econ fitting (it inside / top of fitting to where the tub beds in) and then measured outside of fitting A to outside of fitting B. Then my required tube length was ...


A to B + 2 x Lip depth
post #99966 of 107047
Quote:
Originally Posted by eucalyptus View Post

I am about to work a lot with "normall push-in" fittings. Both for my new project and the new Monsoon fittings I got.

Right now I only have experience from Monsoon's hardline with UV-glue stuff, which isn't very well, and I failed hard, because, yes it's leaking.


So I wonder, have anyone failed with normal compression fittings? (Yes, of course rigid tubing). I don't see anyone reporting they ever have any leaks or anything? rolleyes.gif



And I also wonder how in the easiest way measure and mounts the tubing.

Let's say you have two pieces that are mounted, how do you get the tubing in between, like the picture down below. tongue.gif



Cut it a little bit long and then slowly trim until it's perfect. Measure twice, cut once.
Core X9
(11 items)
 
  
CPUMotherboardGraphicsRAM
i7-4790K Devil’s Canyon Quad-Core 4.0GHz  ASUS Z87-Deluxe LGA 1150 Intel Z87 2 X EVGA 04G-P4-2974-KR GeForce GTX 970 4GB G.SKILL TridentX Series 32GB (4 x 8GB) 240-Pin ... 
Hard DriveHard DriveHard DriveCooling
ADATA Premier SP550 2.5" 480GB SATA III TLC Int... OCZ ARC 100 2.5" 480GB SATA III MLC Internal So... WD Red 5TB NAS Hard Disk Drive - 5400 RPM Class... Liquid 
OSPowerCase
Win 7 64 EVGA 120-G1-1000-VR 80 PLUS GOLD 1000 W Thermaltake Core X9 Black E-ATX 
  hide details  
Reply
Core X9
(11 items)
 
  
CPUMotherboardGraphicsRAM
i7-4790K Devil’s Canyon Quad-Core 4.0GHz  ASUS Z87-Deluxe LGA 1150 Intel Z87 2 X EVGA 04G-P4-2974-KR GeForce GTX 970 4GB G.SKILL TridentX Series 32GB (4 x 8GB) 240-Pin ... 
Hard DriveHard DriveHard DriveCooling
ADATA Premier SP550 2.5" 480GB SATA III TLC Int... OCZ ARC 100 2.5" 480GB SATA III MLC Internal So... WD Red 5TB NAS Hard Disk Drive - 5400 RPM Class... Liquid 
OSPowerCase
Win 7 64 EVGA 120-G1-1000-VR 80 PLUS GOLD 1000 W Thermaltake Core X9 Black E-ATX 
  hide details  
Reply
post #99967 of 107047
Thread Starter 
Quote:
Originally Posted by eucalyptus View Post

I am about to work a lot with "normall push-in" fittings. Both for my new project and the new Monsoon fittings I got.

Right now I only have experience from Monsoon's hardline with UV-glue stuff, which isn't very well, and I failed hard, because, yes it's leaking.


So I wonder, have anyone failed with normal compression fittings? (Yes, of course rigid tubing). I don't see anyone reporting they ever have any leaks or anything? rolleyes.gif



And I also wonder how in the easiest way measure and mounts the tubing.

Let's say you have two pieces that are mounted, how do you get the tubing in between, like the picture down below. tongue.gif


Put the fitting on the end and flex it into place,screw the fitting in,silicone grease helps massively with this.

Also,a quick build for ASUS to display their AURA LED thingy.....

r75UGST.jpg

N1O6QtW.jpg

cFuvXxy.jpg
Edited by B NEGATIVE - 8/17/16 at 12:02pm
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
post #99968 of 107047
Quote:
Originally Posted by eucalyptus View Post

I am about to work a lot with "normall push-in" fittings. Both for my new project and the new Monsoon fittings I got.

Right now I only have experience from Monsoon's hardline with UV-glue stuff, which isn't very well, and I failed hard, because, yes it's leaking.


So I wonder, have anyone failed with normal compression fittings? (Yes, of course rigid tubing). I don't see anyone reporting they ever have any leaks or anything? rolleyes.gif



And I also wonder how in the easiest way measure and mounts the tubing.

Let's say you have two pieces that are mounted, how do you get the tubing in between, like the picture down below. tongue.gif


I use PrimoChill Revolver rigid tube compression fittings and have not had an issue with them in a year. The compression nut a just snugged down on the second revision of my current build. The previous revision I used the included wrench which was a bit overkill IMO.

Check out my rig in my profile to see how I wedged a tube between to semi rigid bodies. Don't cut yourself short or else it won't seal properly.
post #99969 of 107047
Thread Starter 
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
post #99970 of 107047
Quote:

Yes sir, awesome work! Always amazing stuff.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › OCN Water Cooling Club And Picture Gallery