Originally Posted by Burn
First off, thanks for helping.
It's Evil's BH-5. Geil ONE BH stuff, dual ratings. CAS 1.5 @ PC3200, CAS 2 @ PC4000.
As to the Chipset, I haven't applied AS5 to it, I'm gonna do that tonight. Probably within the next 5-10 minutes.
As to HTT & LDT Voltages, where should these be? What would you suggest as to voltages. I'll be putting AS5 on the Chipset in the next 5 minutes. According to my DMM, I'm sitting at: LDT: 1.26 Volts, and Chipset, 1.52 Volts.
Will set the fan speed in my BIOS when I get there.
Burn if you use AS5, don't put too much, there are live contacts on teh substrate and it's possible to short things out if the grease were to touch the resistors.
With my two DFI motherboards anyway, high LDT or chipset voltages were not necessary. For the time being, set LDT to 1.3V and chipset to 1.6V, those voltages allowed both my DFI boards to break 300 MHz. Have you tried lowering the HTT frequency to see if it allows you to clock yoru chip higher?