Overclock.net › Forums › AMD › AMD CPUs › 3200+ Overclock
New Posts  All Forums:Forum Nav:

3200+ Overclock - Page 4

post #31 of 48
Thread Starter 
yeah i didn't change anything in my core center i do everything from my bios.
post #32 of 48
Quote:
Originally Posted by lightsource
PLEASE don't overclock on corecenter, software that overclocks your system isn't that good.

Its not NEARLY as many options, and overclocking like that will more than likely make your system unstable, and crash your prime95 progress as well as mess up your timings that you already set.
once you have ya basic options set in the bios there is nothing wrong with using corecenter or clockgen to do a oc and see how things are going, its easier crashing the thing in windows than it not posting in bios and having to start from scratch again, once you have a stable oc in windows then apply it to ya bios. its easy to monitor temps in windows; while running prime you can play with ya settings and if it crashes youve got something wrong or gone too far. oh yeah, corecenter does have descent option if you have another look or have ever used it!
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
X2 3800 ALBATRON KM51PV M-ATX Gainward 7900GT 512MB Team Group PC4K 2GB 
Hard DriveOSMonitorKeyboard
4 x 250GB That is me. 19" LCD WOLF CLAW V2 
PowerCaseMouse
Silverstone Grunt Aspire X-QPACK The trigger machanism 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
X2 3800 ALBATRON KM51PV M-ATX Gainward 7900GT 512MB Team Group PC4K 2GB 
Hard DriveOSMonitorKeyboard
4 x 250GB That is me. 19" LCD WOLF CLAW V2 
PowerCaseMouse
Silverstone Grunt Aspire X-QPACK The trigger machanism 
  hide details  
Reply
post #33 of 48
Quote:
Originally Posted by RaCeR123
yeah i didn't change anything in my core center i do everything from my bios.
if you are goin to do everything in bios then uninstall corecenter because corecenter will set everything back to where you left corecenter at., the auto oc is on the left at the top in corecenter
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
X2 3800 ALBATRON KM51PV M-ATX Gainward 7900GT 512MB Team Group PC4K 2GB 
Hard DriveOSMonitorKeyboard
4 x 250GB That is me. 19" LCD WOLF CLAW V2 
PowerCaseMouse
Silverstone Grunt Aspire X-QPACK The trigger machanism 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
X2 3800 ALBATRON KM51PV M-ATX Gainward 7900GT 512MB Team Group PC4K 2GB 
Hard DriveOSMonitorKeyboard
4 x 250GB That is me. 19" LCD WOLF CLAW V2 
PowerCaseMouse
Silverstone Grunt Aspire X-QPACK The trigger machanism 
  hide details  
Reply
post #34 of 48
Thread Starter 
how did u overclock it with corecenter? it won't let me change any values except going to sargeant or commander overclock. etc.... huhmm
post #35 of 48
Quote:
Originally Posted by RaCeR123
how did u overclock it with corecenter? it won't let me change any values except going to sargeant or commander overclock. etc.... huhmm
Dude, PLEASE don't change it w/ corecenter.
Project Omega
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-2600K ASUS Sabertooth P67 MSI GTX 570 TwinFrozr II G.SKILL Sniper PC3-14900 
Hard DriveOptical DriveOSMonitor
OCZ Vertex 4 128GB + 15TB Lite-On Bluray Player Windows 7 ASUS VW246H (2) 
KeyboardPowerCaseMouse
Logitech G15 Corsair 750TX Antec P280 Logitech G5 
Mouse PadAudio
SteelSeries Experience I-2 X-Fi Fatal1ty Professional 
  hide details  
Reply
Project Omega
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-2600K ASUS Sabertooth P67 MSI GTX 570 TwinFrozr II G.SKILL Sniper PC3-14900 
Hard DriveOptical DriveOSMonitor
OCZ Vertex 4 128GB + 15TB Lite-On Bluray Player Windows 7 ASUS VW246H (2) 
KeyboardPowerCaseMouse
Logitech G15 Corsair 750TX Antec P280 Logitech G5 
Mouse PadAudio
SteelSeries Experience I-2 X-Fi Fatal1ty Professional 
  hide details  
Reply
post #36 of 48
I would put my money on the ram, what type you running?
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Winchester 3200 DFI NF4 Ultra-D Xp Professional CMV 17" 16ms 
KeyboardPowerCaseMouse
Logitech Media Tagan i-Xeye 420w Super Lanboy Logitech MX500 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
Winchester 3200 DFI NF4 Ultra-D Xp Professional CMV 17" 16ms 
KeyboardPowerCaseMouse
Logitech Media Tagan i-Xeye 420w Super Lanboy Logitech MX500 
  hide details  
Reply
post #37 of 48
Quote:
Originally Posted by RaCeR123
how did u overclock it with corecenter? it won't let me change any values except going to sargeant or commander overclock. etc.... huhmm
in ya bios you go to cell menu and set high performance mode to manual, cool n quiet support ot disabled, ya ht frequency to 600, dynamic overclocking to disabled, cpu ratio to 10, ya fsb frequency to what ever you are going for- at the moment i think you are at 240, ya agp frequency to 66, ht voltage to probably 1.32, mem volts to say 2.75 (unsure on ya ram volts needed) cpu voltage to probably 5% or even more, agp voltage wont hurt up to 1.65 or 1.7 (for stability it can help, it did with my msi board anyway) and ya spread sprectrum to disabled, now for ya ram go to "dram config", dram clock mode to manual, memclock value to probably 333 or even 266 depending on ya speed looking for, try 266 for a start(you are currently at 200 i think), cas latency to 2.5 or even 3 for extra stability, burst length to 8, bank interleaving auto, trcd3, tras7,trp3 and enable 1t timing, they are just some setting I am using on my spare rig which seem to work well with my 3000+ winnie, and as for overclocking using corecenter there is two little red arrows that you can press to bring out the extra options needed for overclocking, you can adjust a few different things there and also apply and save there in windows, its not the best and most stable program to use but it comes with msi and works if needed, it seems to be slow to adjust ya values but give it time, try the auto oc with the settings in ya bios (make sure you have it correct, agp pci locked 66mhz and htt to 600), load cpu-z and watch ya memory speeds to keep an eye on it and run the auto oc to see how far it gets before it crashes. you will get the bsod but that is all part of overclocking isnt it?? with any luck you will end up with a very stable oc and getting more bang for ya buck!! good luck and i hope this helps you out, I know people dont like to oc in windows cause it isnt hardcore???? but who cares about hardcore, when ya get it stable in windows then you can apply ya new settings in the bios so when you turn ya rig on every time you are ready to go, uninstall corecenter when finished and monitor ya temps with a different program ----i can t believe i just typed that out, i need a beer that was off my k8tneo2
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
X2 3800 ALBATRON KM51PV M-ATX Gainward 7900GT 512MB Team Group PC4K 2GB 
Hard DriveOSMonitorKeyboard
4 x 250GB That is me. 19" LCD WOLF CLAW V2 
PowerCaseMouse
Silverstone Grunt Aspire X-QPACK The trigger machanism 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
X2 3800 ALBATRON KM51PV M-ATX Gainward 7900GT 512MB Team Group PC4K 2GB 
Hard DriveOSMonitorKeyboard
4 x 250GB That is me. 19" LCD WOLF CLAW V2 
PowerCaseMouse
Silverstone Grunt Aspire X-QPACK The trigger machanism 
  hide details  
Reply
post #38 of 48
Thread Starter 
ok i finally got a nice overclock with decent temps. 245FSBX10.. temps are 45 load and 31 idle. and i also found out what is holding me back. its the memory i got it booting into bios @ 260 FSB but after 2 min. windows crashed and gave me the memory error message so its kinda abvious just waiting for christmas to get my ocz rev. 2 ... but i can not find it at newegg anymore . I am going to run prime95 over night and see if it is stable at 245X10. thanks everyone that helped
post #39 of 48
Quote:
Originally Posted by RaCeR123
ok i finally got a nice overclock with decent temps. 245FSBX10.. temps are 45 load and 31 idle. and i also found out what is holding me back. its the memory i got it booting into bios @ 260 FSB but after 2 min. windows crashed and gave me the memory error message so its kinda abvious just waiting for christmas to get my ocz rev. 2 ... but i can not find it at newegg anymore . I am going to run prime95 over night and see if it is stable at 245X10. thanks everyone that helped
REv 2? Get some G.Skill TCCD.
Project Omega
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-2600K ASUS Sabertooth P67 MSI GTX 570 TwinFrozr II G.SKILL Sniper PC3-14900 
Hard DriveOptical DriveOSMonitor
OCZ Vertex 4 128GB + 15TB Lite-On Bluray Player Windows 7 ASUS VW246H (2) 
KeyboardPowerCaseMouse
Logitech G15 Corsair 750TX Antec P280 Logitech G5 
Mouse PadAudio
SteelSeries Experience I-2 X-Fi Fatal1ty Professional 
  hide details  
Reply
Project Omega
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-2600K ASUS Sabertooth P67 MSI GTX 570 TwinFrozr II G.SKILL Sniper PC3-14900 
Hard DriveOptical DriveOSMonitor
OCZ Vertex 4 128GB + 15TB Lite-On Bluray Player Windows 7 ASUS VW246H (2) 
KeyboardPowerCaseMouse
Logitech G15 Corsair 750TX Antec P280 Logitech G5 
Mouse PadAudio
SteelSeries Experience I-2 X-Fi Fatal1ty Professional 
  hide details  
Reply
post #40 of 48
Thread Starter 
the ocz is tccd also so i don't know whatever is cheaper also i want to overclock it a little more. so how do I put a divider into my memory? will I be able to get it higher with an divider? thanks
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › 3200+ Overclock