BAD FLASH BAD FLASH!!
I think I bricked my motherboard. I flashed P16 from Foxconn's site, let it reboot, load windows, checked for stable 15 min, restarted, went into the BIOS, started changing my OC back, and it froze, and it will not turn on, settings not saved. It just will not post!
I cleared my BIOS via button - Nothing.
Cleared BIOS via Jumper - Nothing
No lights flashing, DIMM power light solid, good board power solid, hard drives spin up, tried removing cards to see if that works, nothing. I'm not sure what to do, but this board was purchased from the Egg NIB (I think...Box was kinda dinged, and the mounting screws for the 3/8" standoffs were missing (maybe used for a minute and returned)).
Any wild ideas to get my board to POST or, do you think it's bricked?
Jumper Pins 5-6 = Bios 1
Jumper Pins 7-8 = Bios 2
Page 20 in Your Destroyer manual covers it
If that works you can attempt to re-flash bios 1 again to get it working
Edited by XxBeNigNxX - 2/18/10 at 7:42am