Originally Posted by Partier
I recently upgraded my pc to a z87 package and I am finding that the usb ports are just refusing to overclock (win7 64x).
I am using an Intellimouse 3.0 which worked fine at 500hz on my previous system. I have tried it in many different usb 2.0 ports and 3.0 ports (shouldn't work) but it just seems to refuse to increase (or decrease) from 125hz. I have tried different methods of installing the drivers including the one listed on this forum, the ngohq guide and the method I used on my old system.
The thing that bothers me the most is that it isn't consistent. For example most of the time when I install the hidusbf.sys nothing happens, however on other times it disables that port on restart. I have read some people having a similar problem with a similar setup to me on other forums but there hasn't been any solutions so far.
Has anyone else had similar troubles with this setup? Could it be the motherboard drivers are conflicting on some level?
Hello, I registered just to answer this:
I was almost giving up on this, and also having problems with pci too, (asus sabertooh), then I turned off the xHCI option in the bios settings for USB
and did as follows:
* testmode was already enabled
- installed driver
- signed drivers (as admin, both 32 and 64 bit drivers (using w7 64) :
- Opened Setup, ticked "filter on device", choose 1000hz, left it alone didn't close it or press anything else.
honestly, this chipset is a PoS. My sound card keeps not being detected because of the PCI / irq sharing, which is terrible, and shares stuff all across sata, usb, pci16, pci1.. it's a pain to set up, impossible for a regular user to figure out what's wrong, and from what I read, even Asus staff can't figure out how to set this thing up.
Anyway, I hope it works for other users of this chipset..Edited by nordschleife - 11/8/13 at 10:58am