Overclock.net › Forums › Graphics Cards › AMD/ATI › !~Club 5770~!
New Posts  All Forums:Forum Nav:

!~Club 5770~! - Page 414

post #4131 of 5048
Quote:
Originally Posted by DrBrownfinger View Post
msi afterburner. go to settings and click on unlock voltage control. give this article a read. http://www.overclock.net/ati/633816-...r-ati-gpu.html
Thanks bro

*edit*

Edited the msi afterburner config, and enabled voltage tweaking in the advanced section, but i still cant increase the voltage.
Edited by backup - 9/23/10 at 5:51am
post #4132 of 5048
^^^ what he said lol
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
post #4133 of 5048
Quote:
Originally Posted by backup View Post
Thanks bro

*edit*

Edited the msi afterburner config, and enabled voltage tweaking in the advanced section, but i still cant increase the voltage.
Okay then I think you might need the regedit.. I think it was for CF users but I've read single users used ittoo and worked for them as well...

Start > search for: regedit

Edit > Find > ulps

You will be taken to a folder named 0000 ... on the right side scroll until you see EnableULPS .. right-click it "modify" if you see "1" change it to "0"

then do the same for the next folders on the left 0000, 0001, 0002... etc... until there isn't any more number folder that has EnableULPS in it

Ex: *NOTE* I may have more number folders "0000" because I have crossfireX


then simply close it & reboot your computer... hopefully test again and thsi time it will let you save the voltage change

If it doesn't work.. simply revert back those EnableULPS from "0" change them back to "1" and reboot the computer
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
post #4134 of 5048
Quote:
Originally Posted by backup View Post
Thanks bro

*edit*

Edited the msi afterburner config, and enabled voltage tweaking in the advanced section, but i still cant increase the voltage.
i figured if you go in small increments for volts tweaking then it will just set back to default value of 1.125
you can safely bump the voltage up to 1.2 - 1.225 and have decent temps
i'm running mine currently at 1.2 volts 960/1445 clocks with no crashes whatsoever
did half an hour stability test and nothing happened and then i played crisis for a few hours and again nothing happened

edit: well of course i forgot to mention that there is a catch (did i spell it right? i've been losing my english ever since i moved back to my home country)
the temperatures must not reach 75C (at least i know that for a fact about my xfx hd5770)
i let msi burner control my fan speed as such:

C degrees fan rpm %
50 60%
60 80%
65 90%
70 100%

that is just my example
and from my experience (again) i kept on getting many crashes when i was just doing the stability test and i noticed it happens at 75C. so i set my fan's speed according to the heat of the card as seen above and the temp never reached to 70 and i never experience another crash ever. seemed to work well for me.
i dont know about all the others but that is my personal experience
hope this helps
Edited by XtachiX - 9/23/10 at 6:53am
XtachiX
(20 items)
 
XtachiX ROG
(14 items)
 
My first build
(13 items)
 
CPUMotherboardGraphicsGraphics
I7 3770k Asrock Z77 Extreme4 ZOTAC GTX 970 ZOTAC GTX 970 
RAMHard DriveHard DriveHard Drive
G SKILL RIPJAWS saegate 500GB 7200 RPM WD 500GB 7200 RPM Samsung SSD 
CoolingCoolingOSOS
Corsaid H80i g skill ram cooler Windows 10 Pro Kubuntu 
MonitorKeyboardPowerCase
24" Samsung full HD monitor wireless logitech EVGA SUPERNOVA G2 850W HAF X 
MouseMouse PadAudio
wireless logitech custom dragon LG home theater system 
CPUMotherboardGraphicsRAM
Q9550 E0 O/C to 3.39 GHz (399 fsb) stock voltage EP 43 UD3L 9400 gt 6GB kingmax 1066 
OSKeyboardPowerCase
Windows 7 Ultimate 64bit eXPeditor CM Silent Pro M1000 HAF 922 
Mouse
logitech something 
  hide details  
Reply
XtachiX
(20 items)
 
XtachiX ROG
(14 items)
 
My first build
(13 items)
 
CPUMotherboardGraphicsGraphics
I7 3770k Asrock Z77 Extreme4 ZOTAC GTX 970 ZOTAC GTX 970 
RAMHard DriveHard DriveHard Drive
G SKILL RIPJAWS saegate 500GB 7200 RPM WD 500GB 7200 RPM Samsung SSD 
CoolingCoolingOSOS
Corsaid H80i g skill ram cooler Windows 10 Pro Kubuntu 
MonitorKeyboardPowerCase
24" Samsung full HD monitor wireless logitech EVGA SUPERNOVA G2 850W HAF X 
MouseMouse PadAudio
wireless logitech custom dragon LG home theater system 
CPUMotherboardGraphicsRAM
Q9550 E0 O/C to 3.39 GHz (399 fsb) stock voltage EP 43 UD3L 9400 gt 6GB kingmax 1066 
OSKeyboardPowerCase
Windows 7 Ultimate 64bit eXPeditor CM Silent Pro M1000 HAF 922 
Mouse
logitech something 
  hide details  
Reply
post #4135 of 5048
keep your load temps as low as you can..you may clock higher with less GPUv

*heat builds resistance, in turn requiring more amperage, which raises demands on mosfets and power components..which creates more heat..etc
post #4136 of 5048
    
MotherboardGraphicsRAMHard Drive
GA-F2A68HM-H MSI R9 270 2G Gaming Series A-DATA OCZ ARC 100 120GB SSD sata III 6GB/s  
CoolingOSMonitorKeyboard
stock 120mm fan plus 2 90mm fans pushing air ou... Windows10 X2GEN 19 inch widescreen stock 
PowerCaseMouseMouse Pad
OCZ 700W ModXStream Pro 80 Plus  ULTRA MID TOWER GAMING CASE  Gigabyte laser mouse 3 speed  Cyber Sniper  
Audio
built in motherboard  
  hide details  
Reply
    
MotherboardGraphicsRAMHard Drive
GA-F2A68HM-H MSI R9 270 2G Gaming Series A-DATA OCZ ARC 100 120GB SSD sata III 6GB/s  
CoolingOSMonitorKeyboard
stock 120mm fan plus 2 90mm fans pushing air ou... Windows10 X2GEN 19 inch widescreen stock 
PowerCaseMouseMouse Pad
OCZ 700W ModXStream Pro 80 Plus  ULTRA MID TOWER GAMING CASE  Gigabyte laser mouse 3 speed  Cyber Sniper  
Audio
built in motherboard  
  hide details  
Reply
post #4137 of 5048
I need a little help here...
So I decided to finally start some overcloking on my CF

here is my question how the heck do I force Komboster to run in crossfireX? I try to run it full screen but it only uses 1 of my GPU's

Current overclock: 1001/1401 1.25v
Well for 1 GPU running on that setting it went perfectly fine.. here is above 3 minutes... max temp was 61c


If I ran Kombustor wrong please tell me the settings I should run the test & as well how to force it to use my crossfireX

----
Update - 1

Scratch that overclock... tested running a game and system froze... going to downclock and do more testings

----
Update - 2

It seems I'm only stable on 952/1300 1.25v - GPU1 64c / GPU2 69c - 1600x900 DX11 AAx8


but... msi afterburner is being really gay on me.. sometimes making my 2nd gpu run at stock or stay on the overclock setting while in 2D mode(in the settings, setting up a 2D & 3D profile)... so wte I'm giving up, tried many reboots and 2nd gpu always acts different no matter if I save a new profile on afterburner.. even uninstalled(choosing not to keep settings) & reinstalled it.. it kept doing the same issue random clocks on the 2nd gpu. It just only worked the 1st time I did the settings but after rebooting that's when the issues started :/
Edited by sendblink23 - 9/25/10 at 6:57am
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
post #4138 of 5048
once your clocks are set and saved as profiles in AfterBurner, go into the settings and set the program so you are viewing the 2nd card..then leave it as such.

*I too had the same issue, using 2x GPU's + AF, I found that leaving the program set to the 2nd GPU..it will set my saved clocks for both primary and secondary GPU's.. with the program set on the 1st GPU it often "forgets" to OC my 2nd GPU.

..hope that helps some.
post #4139 of 5048
Quote:
Originally Posted by CL3P20 View Post
once your clocks are set and saved as profiles in AfterBurner, go into the settings and set the program so you are viewing the 2nd card..then leave it as such.

*I too had the same issue, using 2x GPU's + AF, I found that leaving the program set to the 2nd GPU..it will set my saved clocks for both primary and secondary GPU's.. with the program set on the 1st GPU it often "forgets" to OC my 2nd GPU.

..hope that helps some.
i'll try that now thanks
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
post #4140 of 5048
buu it started doing the issue to the 1st gpu when testng viewing 2nd gpu

on idle they both are at 157/300 but right after I start a 3d app the 1st gpu(or 2nd gpu if I use to view 1st gpu in msi afterburner) it will stay in stock mode and not the overclocked settings profile

Here are screen shots of my msi afterburner settings and showing what happens when going I'm to start a 3d app as well... look at the bottom right on Everest to notice the gpu clocks changes

Fan Profile: (same as XtachiX - it works for me)


2D & 3D Profile Settings:


1st GPU Viewing:


1st GPU Starting a 3D app:


2nd GPU Viewing:


2nd GPU Starting a 3D app:


When they are both working they would both be at the overclocked settings if I open Kombustor... and its not working... because when I run the Stability Test the other card stays on 850/1200 instead of them both overclocked 952/1300. :/

Any other suggestion
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD/ATI
Overclock.net › Forums › Graphics Cards › AMD/ATI › !~Club 5770~!