Originally Posted by Ste
You can do either with the memory. Loosen the timings and try and get it stable or try a slight vdimm bump, as long as you don't go above the recommended voltage from the manufacturer.
I'd suspect you need a slight vcore increase as well, maybe upto ~1.5-1.55v
You need to have a play with the settings as these are only suggestions. Try a few different ideas out and see what works best for you.
Okaly dokaly.....Will play around a bit and get back to you.
My Plan is to test styabiltiy at 2.7Ghz with a ram multiplier again but on p95.
Then I will put back to 1:1 (400Mhz) and have a play with settigns. My Vdimm is on 1.85 and manufactures limit (GEIL) is 1.95, and Ill loosen timings.
Just one question, do I only chnage the 4 timings that i changed before i.e.
3-4-4-8, or do i have to chnage anything else.