Athlon II X4 type: Athlon II x4 630 (L3 unlocked)
CPU stepping & mfg date: CACYC AC 1025GPMW (2008)
BIOS Version: American Megatrends Inc. 3406 (8/20/2010)
Clock speed: 3220.2 Mhz
FSB x Multi: 230.0 x 14
RAM speed: 1333Mhz DDR3 (8-8-8-16-27-1T)
NB speed: 2107.1
NB Voltage: 1.18
HT Link: 2107.1
HT Voltage: 1.20
Motherboard: ASUS M4A78T-E (Rev. 1.02G)
Cooling method: Liquid
HSF Used: Corsair H50, Push-Pull With 2x Cooler Master Excalibur R4-EXBB-20PK-R0 120 mm Fans
CPU-Z validation: http://valid.canardpc.com/show_oc.php?id=1762035
OS: Windows 7 Home Premium x64
I was using ASUS TurboV and really couldn't get past 2.9. Did a little more research and decided to OC from BIOS. All I did was raise CPU Bus Speed from 200 to 230 MHz and left every thing else on Auto. I realized that OC'ng in BIOS that it was automatically adjusting Memory timing with what else i was changing. If anyone with similar hardware setup has any suggestions, I'm all ears. Thanks in advance.
When using the FSB to OC, its best you manually set the CPU volts, HT and NB, memory speeds and timings. Leaving them at AUTO may cause overvolting and/or stability issues.
I've been running mine at these specs for over 5 months 24/7.