Originally Posted by Horsemama1956
CPU Multi - x14
NB Multi - x9
HT Clock - 265
HT Link - x8
Mem Freq - x5.33(change depending on memory)
Mem Voltage - 1.7(Yours could vary, just test)
NB Voltage - 1.20(Varies)
CPU NB Vid - 1.325(This is key to getting over 250 HT clock) Just see what's stable for you, might be lower, or higher.
CPU voltage 1.5.
Case temps 19-20, and my cpu idles at 31-33 and loads at 43-47. Hope that helps. My memory is actually an Intel OCZ Kit, so it's stock 1.65v.
I can get it up to 3.9, maybe even 4 at 1.55 but the temps hit the mid 50's and that's too high for me. I think I got a really good chip, though.
Hope that helps.
Very nice of you Horsemama1956 ^^
It quite late here, so I'll try this tomarrow , and again I appreciate ur quick reply and thanks for the infoHorsemama1956 .
Rap goes as said.
Edit : mine idles at 26-27 and under load 40-43.It was hotter before but I added a 120mm fan to the door of case and improved the air follow and had a 3 degree drop in temp.Edited by luches - 3/5/10 at 4:35pm