Prime95 gave me an error after 3.30h
. It Passed 25runs at LinX wich i call stable in my case.
Cause my other tests gave me errors after 2-3mins
Well i think im gonna go back to 3,8-3,9Ghz cause i dont wanna rise my vcore higher as it is now. 80Â°C in LinX is hot enough. I want to keep it under 75Â°C so i have some space in the Summer and dont need all my fans at 100%
The Data Sheet of my memory says i need a voltage of 1,75v for it to run at the specified 1600Mhz and my standard timings 9-9-9-24.
But i heard a higher vDimm then 1,65v is dangerous for the i5. I tried to run my Memory with up to 1,8v in my earlier tries and a Memory Ratio of 4 but the system was not stable so i changed it back.
Upping the VTT over 1,3 resulted in a Freezing system or BSOD at start up.
Hope some one has any ideas