Overclock.net › Forums › Volt Mods › General Volt Mods › The OCN Volt Mod Squad | HWbot's Finest | The Official Club
New Posts  All Forums:Forum Nav:

The OCN Volt Mod Squad | HWbot's Finest | The Official Club - Page 21

post #201 of 1336
I don't knwo what your doing doc, but when I click the linked images they are really small. Much smaller then the uploaded image in the post.




Doc, do yo uknow if the PNY 8800GT is ref design or not?

This is a good start guys tyvm!!!

I noticed our mobo v'mod section is lacking in worked mods. I wish I knew more about finding mobo vdroop and vcore mods.

Here's the currant list thus far:
Quote:
-V'mod list:

NVidia GPUs:
GeForce 9600GT EVGA/PNY/BFG reference PCB: MEM GPU vMeasure Note: Ref designs most do a VID mod:Source1 Source2

GeForce 9600GT Galaxy non-reference PCB: GPU MEM vMeasure

GeForce 9600GT Zotac non-reference PCB (version A): MEM GPU vMeasure

GeForce 9600GT Zotac non-reference PCB (version B): GPU MEM

GeForce 8800GT XFX non-reference PCB: GPU MEM vMeasure

GeForce 8800GT PNY: GPU MEM


Intel Motherboards

nForce 750i and 780i EVGA: vDroop and vCore

nForce 750i ASUS: vDroop

X58 Foxconn Bloodrage: PCIE / Blk mod Switching SMR from 128 to 125 allows PCI bus over 103Mhz

Part 2

--How to guides $ FAQ:

-How to: v'mod a GPU: CL3P20's guide

-How to: use a DMM:

-How to: use a soldering iron:

-FAQ Capacitors:




Data sheet links:
www.alldatasheet.com
www.datasheetarchive.com
www.data-sheet.net
    
CPUMotherboardGraphicsRAM
E8400, E8600, 980BE T2RS+, P5E3, TA890FXE 8800GTS's,GTX's,GS,Ultra's,9600GT Lots of D9's and some crap DDR3 
Hard DrivePowerCase
Seagate 250GB + 80GB WD for benching TT 875w, Corsair 650TX Custom bench station 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E8400, E8600, 980BE T2RS+, P5E3, TA890FXE 8800GTS's,GTX's,GS,Ultra's,9600GT Lots of D9's and some crap DDR3 
Hard DrivePowerCase
Seagate 250GB + 80GB WD for benching TT 875w, Corsair 650TX Custom bench station 
  hide details  
Reply
post #202 of 1336
Thread Starter 
The PNY is reference design as far the the GPU IC goes, the memory is aobut the same jsut in a different location, I think I linked the pictures to their thumnails, do you want me to change it?
post #203 of 1336
Quote:
Originally Posted by tha d0ctor View Post
The PNY is reference design as far the the GPU IC goes, the memory is aobut the same jsut in a different location, I think I linked the pictures to their thumnails, do you want me to change it?
Being reference design included the whole PCB not just IC. If any layout is changed from ref, then its a non-ref board.

I fixed the links when I updated the list.

tyvm for your contributions guys! +reps given. keep'em coming
    
CPUMotherboardGraphicsRAM
E8400, E8600, 980BE T2RS+, P5E3, TA890FXE 8800GTS's,GTX's,GS,Ultra's,9600GT Lots of D9's and some crap DDR3 
Hard DrivePowerCase
Seagate 250GB + 80GB WD for benching TT 875w, Corsair 650TX Custom bench station 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E8400, E8600, 980BE T2RS+, P5E3, TA890FXE 8800GTS's,GTX's,GS,Ultra's,9600GT Lots of D9's and some crap DDR3 
Hard DrivePowerCase
Seagate 250GB + 80GB WD for benching TT 875w, Corsair 650TX Custom bench station 
  hide details  
Reply
post #204 of 1336
Okay here is some info on the 2600Pro, though for the life of me I couldnt find the data sheet on the GPU IC. Sorry bout the pix, I dont have the card anymore so I cant take any new ones.
LL
LL
Edited by Voltage_Drop - 12/4/09 at 11:51am
EVOLVE
(13 items)
 
  
CPUMotherboardGraphicsRAM
|i5 750-voltage may vary| |Foxconn Katana[Non GTI]| 380 4Gb |4Gb/Tridents@Clocked| 
Hard DriveOSMonitorPower
|[V3/60Gb][500Gb]| |Windows 7 64 bit| |LG-EW224| |Antec HCG750| 
Case
|Tech Station| 
  hide details  
Reply
EVOLVE
(13 items)
 
  
CPUMotherboardGraphicsRAM
|i5 750-voltage may vary| |Foxconn Katana[Non GTI]| 380 4Gb |4Gb/Tridents@Clocked| 
Hard DriveOSMonitorPower
|[V3/60Gb][500Gb]| |Windows 7 64 bit| |LG-EW224| |Antec HCG750| 
Case
|Tech Station| 
  hide details  
Reply
post #205 of 1336
Thread Starter 
I'll keep them coming, I guess that make it non-reference Pizzaman, Im getting all caught up in techicalities

also pizzaman, that XFX volt mod sohuld work on their 9600 GSO aswell
post #206 of 1336
May be listing mods according to IC rather than PCB would be easier..it sure would cut the ATI mod list down
post #207 of 1336
Here is my latest mod.6200TC 128DDR
stock 350/400
MOD>550/546@1,65v/3,10v
Basically i turned the vMEM mod resistor to 0 OHM to take the 3,10 volts so u can basically not use resistor fro teh vMEM and just solder a single wire!!!


the 3 left caps are 16v/470uF while the 2 right ones are 6,3volts/1000uF

Quote:
Originally Posted by CL3P20 View Post
May be listing mods according to IC rather than PCB would be easier..it sure would cut the ATI mod list down
I totally agree!!!

This is the MOD for the uP6201BQ.
http://www.techpowerup.com/articles/...voltmods/151/2
Its widely used among the mid-high end ATI VGAs

Here is the vMOD for the ST L6788A
Used in the 5770 and 4770 models.It has I2C support too so it supports software adjustment!

U can add caps to add capacitance to the voltage circuitry.
From right to the left.The 2 right ones are 16v/470uF and the 3 left ones are 6,3v/1000uF placed 1 on each power phase.

Edited by theo.gr - 12/4/09 at 11:54am
    
CPUMotherboardGraphicsRAM
C2Q Q6600 @3,6GHz DFI LP DK X48 T2RS 5770 @1000/1400 BALLISTIX 6400@1203MHz 
Hard DriveOSMonitorPower
2*160GB SEAGATE VISTA 32 ULTIMATE 24" LG FLATRON 2442PA Full HD TT PUREPOWER RX 600 
Case
H.A.F 932 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
C2Q Q6600 @3,6GHz DFI LP DK X48 T2RS 5770 @1000/1400 BALLISTIX 6400@1203MHz 
Hard DriveOSMonitorPower
2*160GB SEAGATE VISTA 32 ULTIMATE 24" LG FLATRON 2442PA Full HD TT PUREPOWER RX 600 
Case
H.A.F 932 
  hide details  
Reply
post #208 of 1336
Quote:
Originally Posted by Voltage_Drop View Post
Okay here is some info on the 2600Pro, though for the life of me I couldnt find the data sheet on the GPU IC. Sorry bout the pix, I dont have the card anymore so I cant take any new ones.
What size VRs are need for GPU and MEM? I can work with those pics NP.

Quote:
Originally Posted by tha d0ctor View Post
I'll keep them coming, I guess that make it non-reference Pizzaman, Im getting all caught up in techicalities

also pizzaman, that XFX volt mod sohuld work on their 9600 GSO aswell
Cool, I'll just duplicate it. Updated!

Quote:
Originally Posted by CL3P20 View Post
May be listing mods according to IC rather than PCB would be easier..it sure would cut the ATI mod list down
I don't mind duplicating info. I want it to be somewhat newb friendly. We can have 5 cards listed using all the same pics is fine with me.
    
CPUMotherboardGraphicsRAM
E8400, E8600, 980BE T2RS+, P5E3, TA890FXE 8800GTS's,GTX's,GS,Ultra's,9600GT Lots of D9's and some crap DDR3 
Hard DrivePowerCase
Seagate 250GB + 80GB WD for benching TT 875w, Corsair 650TX Custom bench station 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E8400, E8600, 980BE T2RS+, P5E3, TA890FXE 8800GTS's,GTX's,GS,Ultra's,9600GT Lots of D9's and some crap DDR3 
Hard DrivePowerCase
Seagate 250GB + 80GB WD for benching TT 875w, Corsair 650TX Custom bench station 
  hide details  
Reply
post #209 of 1336
Quote:
Originally Posted by theo.gr View Post
Here is my latest mod.6200TC 128DDR
stock 350/400
MOD>550/546@1,65v/3,10v
Basically i turned the vMEM mod resistor to 0 OHM to take the 3,10 volts so u can basically not use resistor fro teh vMEM and just solder a single wire!!!


the 3 left caps are 16v/470uF while the 2 right ones are 6,3volts/1000uF


I totally agree!!!

This is the MOD for the uP6201BQ.
http://www.techpowerup.com/articles/...voltmods/151/2
Its widely used among the mid-high end ATI VGAs
Updated! thx

BTW, do you have any voltage measure points you can add?
    
CPUMotherboardGraphicsRAM
E8400, E8600, 980BE T2RS+, P5E3, TA890FXE 8800GTS's,GTX's,GS,Ultra's,9600GT Lots of D9's and some crap DDR3 
Hard DrivePowerCase
Seagate 250GB + 80GB WD for benching TT 875w, Corsair 650TX Custom bench station 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E8400, E8600, 980BE T2RS+, P5E3, TA890FXE 8800GTS's,GTX's,GS,Ultra's,9600GT Lots of D9's and some crap DDR3 
Hard DrivePowerCase
Seagate 250GB + 80GB WD for benching TT 875w, Corsair 650TX Custom bench station 
  hide details  
Reply
post #210 of 1336
Add this to the 6200TC mod.V MEASURING SPOTS ADDED!
    
CPUMotherboardGraphicsRAM
C2Q Q6600 @3,6GHz DFI LP DK X48 T2RS 5770 @1000/1400 BALLISTIX 6400@1203MHz 
Hard DriveOSMonitorPower
2*160GB SEAGATE VISTA 32 ULTIMATE 24" LG FLATRON 2442PA Full HD TT PUREPOWER RX 600 
Case
H.A.F 932 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
C2Q Q6600 @3,6GHz DFI LP DK X48 T2RS 5770 @1000/1400 BALLISTIX 6400@1203MHz 
Hard DriveOSMonitorPower
2*160GB SEAGATE VISTA 32 ULTIMATE 24" LG FLATRON 2442PA Full HD TT PUREPOWER RX 600 
Case
H.A.F 932 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: General Volt Mods
Overclock.net › Forums › Volt Mods › General Volt Mods › The OCN Volt Mod Squad | HWbot's Finest | The Official Club