Overclock.net › Forums › Volt Mods › General Volt Mods › The OCN Volt Mod Squad | HWbot's Finest | The Official Club
New Posts  All Forums:Forum Nav:

The OCN Volt Mod Squad | HWbot's Finest | The Official Club - Page 76

post #751 of 1336
Thread Starter 
well done FtW to hear about the quimodas, after reading about the 1038 core clock I thought you would surely toss my record aside. That 8800GT 512 category is a point cash cow, there are so many submission I'm not at all suprised you got as many points as you did. Keep it up you're making some serious moves in hwbot.

I'm calling it an early night, dentist real early tomorrow but I will update your cards and point standings tomorrow. Thanks for the formatting I appreciate it!

edit: that GTX 285 mod is immaculate, I'd love to see it subzero especially with the OCP mod. They really dissected all the mods for it on XS real well. I was too scare to hold on to mine to sling some solder on it.
post #752 of 1336
FTW, what did you do there on the VR for the 285. It looks like you have two legs soldered to ground?



EDIT: I totally missed the release of the GT240. This card looks like a 1ghz OC beast waiting to happen. Performance level around a 96GT. More shaders, better folder, GDDR5, less memory bottleneck, 40nm G215 core, yea baby. So far I haven't found one with a PCIe power connector, but I'm still looking.
    
CPUMotherboardGraphicsRAM
E8400, E8600, 980BE T2RS+, P5E3, TA890FXE 8800GTS's,GTX's,GS,Ultra's,9600GT Lots of D9's and some crap DDR3 
Hard DrivePowerCase
Seagate 250GB + 80GB WD for benching TT 875w, Corsair 650TX Custom bench station 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E8400, E8600, 980BE T2RS+, P5E3, TA890FXE 8800GTS's,GTX's,GS,Ultra's,9600GT Lots of D9's and some crap DDR3 
Hard DrivePowerCase
Seagate 250GB + 80GB WD for benching TT 875w, Corsair 650TX Custom bench station 
  hide details  
Reply
post #753 of 1336

Just uploaded this!Anyone that owns a 5770 and a DMM please set and measure your voltage and tell me if it looks anyway similar to this!

    
CPUMotherboardGraphicsRAM
C2Q Q6600 @3,6GHz DFI LP DK X48 T2RS 5770 @1000/1400 BALLISTIX 6400@1203MHz 
Hard DriveOSMonitorPower
2*160GB SEAGATE VISTA 32 ULTIMATE 24" LG FLATRON 2442PA Full HD TT PUREPOWER RX 600 
Case
H.A.F 932 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
C2Q Q6600 @3,6GHz DFI LP DK X48 T2RS 5770 @1000/1400 BALLISTIX 6400@1203MHz 
Hard DriveOSMonitorPower
2*160GB SEAGATE VISTA 32 ULTIMATE 24" LG FLATRON 2442PA Full HD TT PUREPOWER RX 600 
Case
H.A.F 932 
  hide details  
Reply
post #754 of 1336
Thread Starter 
Quote:
Originally Posted by theo.gr View Post
Just uploaded this!Anyone that owns a 5770 and a DMM please set and measure your voltage and tell me if it looks anyway similar to this!
YouTube- 5770 vmodded with 100k VRROCK STABLE voltage
what's the stock voltage?
post #755 of 1336
This method..





Or will this one be better?



Okay, first these two.

Will a 47k work instead of a 50k?
Which is ground, - and +?


This is my 100k one:



I'm really unsure how to tune these ones, but soldering the cables seems like a piece of cake.

This is my Equipment.




Help help help

Happy Commando:


Edit: I got a multimeter.
Edited by Kriztoffer - 1/13/10 at 1:11pm
Classifried
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeno W3520. Asus Rampage III Extreme. Asus GTX 295 Dual-PCB and HIS 4870x2 Corsair Dominator GT 2000mhz CL8 
Hard DriveOptical DriveOSMonitor
SATA And IDE.. LG Win 7, XP and Vista SyncMaster 206BW 20" 
KeyboardPowerCaseMouse
Dell Ps2 Corsair AX850 2 Meter longe table for benching. Razer Deathadder 
Mouse Pad
Razer 
  hide details  
Reply
Classifried
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeno W3520. Asus Rampage III Extreme. Asus GTX 295 Dual-PCB and HIS 4870x2 Corsair Dominator GT 2000mhz CL8 
Hard DriveOptical DriveOSMonitor
SATA And IDE.. LG Win 7, XP and Vista SyncMaster 206BW 20" 
KeyboardPowerCaseMouse
Dell Ps2 Corsair AX850 2 Meter longe table for benching. Razer Deathadder 
Mouse Pad
Razer 
  hide details  
Reply
post #756 of 1336
Quote:
Originally Posted by Kriztoffer View Post

This one because you're not gonna want to try to get in that space to fiddle with the resistors when you've got it insulated and a pot on your CPU. Also, you'll leave that ground point resistor free in case you want to do the OVP mod later. The only difference in solder points between the two is what they use for a ground.



Okay, first these two.

Will a 47k work instead of a 50k? Yes, for what you're using it for.

Which is ground, - and +? VR's don't have a +/-/ground. Use the center prong and pick one of the outer ones - cut the other outer one off to get it out of the way. Use a multimeter on the two prongs you're using to measure the resistance. Then turn the knob until resistance is maximized (50K or 100K). Make a note of what direction you need to turn the knob to raise or lower resistance. For personal convention (to keep things straight in my own mind), I always pick the outer prong that utilizes a counter-clockwise turn to lower resistance.

I'm really unsure how to tune these ones, but soldering the cables seems like a piece of cake.
Hope that helps. Sorry for writing my own stuff in your quotes.
24/7
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600K @ 5.0 ghz 1.4v Gigabyte UD4 GTX 580 Lightning Ripjaws 2133Mhz 7-10-10-27 
Hard DriveOSMonitorPower
Kingston 128 SSD Win7 64 Samsung 245T HX1000 
Case
Lian Li 
  hide details  
Reply
24/7
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600K @ 5.0 ghz 1.4v Gigabyte UD4 GTX 580 Lightning Ripjaws 2133Mhz 7-10-10-27 
Hard DriveOSMonitorPower
Kingston 128 SSD Win7 64 Samsung 245T HX1000 
Case
Lian Li 
  hide details  
Reply
post #757 of 1336
Quote:
Originally Posted by Patch View Post
Hope that helps. Sorry for writing my own stuff in your quotes.
Thanks A lot patch! you cleared mostly eveything out I will solder the cables onto the board now.
Classifried
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeno W3520. Asus Rampage III Extreme. Asus GTX 295 Dual-PCB and HIS 4870x2 Corsair Dominator GT 2000mhz CL8 
Hard DriveOptical DriveOSMonitor
SATA And IDE.. LG Win 7, XP and Vista SyncMaster 206BW 20" 
KeyboardPowerCaseMouse
Dell Ps2 Corsair AX850 2 Meter longe table for benching. Razer Deathadder 
Mouse Pad
Razer 
  hide details  
Reply
Classifried
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeno W3520. Asus Rampage III Extreme. Asus GTX 295 Dual-PCB and HIS 4870x2 Corsair Dominator GT 2000mhz CL8 
Hard DriveOptical DriveOSMonitor
SATA And IDE.. LG Win 7, XP and Vista SyncMaster 206BW 20" 
KeyboardPowerCaseMouse
Dell Ps2 Corsair AX850 2 Meter longe table for benching. Razer Deathadder 
Mouse Pad
Razer 
  hide details  
Reply
post #758 of 1336
Quote:
Originally Posted by PizzaMan View Post
FTW, what did you do there on the VR for the 285. It looks like you have two legs soldered to ground?
The green leg goes to ground, the other 2 go to the pads of a resistor that was once there. First vgpu mod I've seen that used all 3 legs of a VR.
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
post #759 of 1336
Okay! I've soldered the cabels onto the points...

So next the VR's...
Classifried
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeno W3520. Asus Rampage III Extreme. Asus GTX 295 Dual-PCB and HIS 4870x2 Corsair Dominator GT 2000mhz CL8 
Hard DriveOptical DriveOSMonitor
SATA And IDE.. LG Win 7, XP and Vista SyncMaster 206BW 20" 
KeyboardPowerCaseMouse
Dell Ps2 Corsair AX850 2 Meter longe table for benching. Razer Deathadder 
Mouse Pad
Razer 
  hide details  
Reply
Classifried
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeno W3520. Asus Rampage III Extreme. Asus GTX 295 Dual-PCB and HIS 4870x2 Corsair Dominator GT 2000mhz CL8 
Hard DriveOptical DriveOSMonitor
SATA And IDE.. LG Win 7, XP and Vista SyncMaster 206BW 20" 
KeyboardPowerCaseMouse
Dell Ps2 Corsair AX850 2 Meter longe table for benching. Razer Deathadder 
Mouse Pad
Razer 
  hide details  
Reply
post #760 of 1336
Nice soldering!
24/7
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600K @ 5.0 ghz 1.4v Gigabyte UD4 GTX 580 Lightning Ripjaws 2133Mhz 7-10-10-27 
Hard DriveOSMonitorPower
Kingston 128 SSD Win7 64 Samsung 245T HX1000 
Case
Lian Li 
  hide details  
Reply
24/7
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600K @ 5.0 ghz 1.4v Gigabyte UD4 GTX 580 Lightning Ripjaws 2133Mhz 7-10-10-27 
Hard DriveOSMonitorPower
Kingston 128 SSD Win7 64 Samsung 245T HX1000 
Case
Lian Li 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: General Volt Mods
Overclock.net › Forums › Volt Mods › General Volt Mods › The OCN Volt Mod Squad | HWbot's Finest | The Official Club