Overclock.net › Forums › Volt Mods › General Volt Mods › The OCN Volt Mod Squad | HWbot's Finest | The Official Club
New Posts  All Forums:Forum Nav:

The OCN Volt Mod Squad | HWbot's Finest | The Official Club - Page 79

post #781 of 1336
Patch, can't wait to see some pics of that thing in action. If the evbot works anywhere near as good as it sounds it'll be kind of a must-have for benching...

I can also add my modded ud5, just a resistor swap same as the bloodrage. It was also my first mod, & is pretty much responsible for all my points where I'm clocked over 4.6Ghz.

    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
post #782 of 1336
Thread Starter 
nice that is simply amazing, although I would prefer the x58 I hear the p55 tears!

, is the 4-way SLI classy even released yet patch, I was thinking of getting that and some fermis and maybe a 980x around march/april once i get out of basic training when i figure out where my duty station is going to be

also where where do you go about getting the evbot and what's its price roughly

also I'd like to know who the first person on OCN to get this:
http://www.daily-hardware.com/index....ge=news&id=151
will be, and if the board will overclock well at all.

Ftw420: just ot get an idea, what are your voltages/pci-e clock like over 4.6ghz, also do you mess with the ioh/cpu drive strength/latencies
Edited by tha d0ctor - 1/13/10 at 6:55pm
post #783 of 1336
Okay I posted this a few posts back but got trampled over by the excitement of the classified mobo, so here we go again.

http://www.newegg.com/Product/Produc...82E16813186153

Okay so what do you think of this board for a mod? the reasons I chose this is because:

1. Its cheap
2. 3 PCIEx16
3. 8 Pin power
4. 775 (no need to upgrade CPU)
5. DDR2 (no need to upgrade RAM)
6. Its cheap ( no big loss if mod goes wrong)

EDIT:Im not looking for abetter board, just something with a lot of options and something to thrash on the cheap
Edited by Voltage_Drop - 1/13/10 at 7:21pm
EVOLVE
(13 items)
 
  
CPUMotherboardGraphicsRAM
|i5 750-voltage may vary| |Foxconn Katana[Non GTI]| 380 4Gb |4Gb/Tridents@Clocked| 
Hard DriveOSMonitorPower
|[V3/60Gb][500Gb]| |Windows 7 64 bit| |LG-EW224| |Antec HCG750| 
Case
|Tech Station| 
  hide details  
Reply
EVOLVE
(13 items)
 
  
CPUMotherboardGraphicsRAM
|i5 750-voltage may vary| |Foxconn Katana[Non GTI]| 380 4Gb |4Gb/Tridents@Clocked| 
Hard DriveOSMonitorPower
|[V3/60Gb][500Gb]| |Windows 7 64 bit| |LG-EW224| |Antec HCG750| 
Case
|Tech Station| 
  hide details  
Reply
post #784 of 1336
YAY. I went the way Patch told me. Change the 100K VR for Vcore boost and the 47K VR for Vdrop.

Voltage is stable and gives a boost! Wow, I'm really happy now, I've finally volt modded my Commdo. 9500GT next, I've ordered some 100k's and 50k's for Voltmodding stuff..

Thansk for all the help lads, you guys have been really helpful!!
Classifried
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeno W3520. Asus Rampage III Extreme. Asus GTX 295 Dual-PCB and HIS 4870x2 Corsair Dominator GT 2000mhz CL8 
Hard DriveOptical DriveOSMonitor
SATA And IDE.. LG Win 7, XP and Vista SyncMaster 206BW 20" 
KeyboardPowerCaseMouse
Dell Ps2 Corsair AX850 2 Meter longe table for benching. Razer Deathadder 
Mouse Pad
Razer 
  hide details  
Reply
Classifried
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeno W3520. Asus Rampage III Extreme. Asus GTX 295 Dual-PCB and HIS 4870x2 Corsair Dominator GT 2000mhz CL8 
Hard DriveOptical DriveOSMonitor
SATA And IDE.. LG Win 7, XP and Vista SyncMaster 206BW 20" 
KeyboardPowerCaseMouse
Dell Ps2 Corsair AX850 2 Meter longe table for benching. Razer Deathadder 
Mouse Pad
Razer 
  hide details  
Reply
post #785 of 1336
Quote:
Originally Posted by FtW 420 View Post
Patch, can't wait to see some pics of that thing in action. If the evbot works anywhere near as good as it sounds it'll be kind of a must-have for benching...
I've been using it on the Classy 4way and it is awesome. Only problem is that it's only for the very high end EVGA hardware. (Unless you're Shamino. He posted a pic using it on a 5870 - but that's modding way beyond me).

Quote:
Originally Posted by tha d0ctor View Post
nice that is simply amazing, although I would prefer the x58 I hear the p55 tears!

, is the 4-way SLI classy even released yet patch,

also where where do you go about getting the evbot and what's its price roughly
I've been using the Classy 4 way for over a month now.

The evbot is $100 and I think is only available on the EVGA site. I paid 79.99 on the day of release.

Quote:
Originally Posted by Voltage_Drop View Post
Okay I posted this a few posts back but got trampled over by the excitement of the classified mobo, so here we go again.

http://www.newegg.com/Product/Produc...82E16813186153

Okay so what do you think of this board for a mod? the reasons I chose this is because:

1. Its cheap
2. 3 PCIEx16
3. 8 Pin power
4. 775 (no need to upgrade CPU)
5. DDR2 (no need to upgrade RAM)
6. Its cheap ( no big loss if mod goes wrong)
I don't know anything about that mobo, but it looks like a good purchase. You can get some older ATI cards and mod em for trifire.

Quote:
Originally Posted by Kriztoffer View Post
YAY. I went the way Patch told me. Change the 100K VR for Vcore boost and the 47K VR for Vdrop.

Voltage is stable and gives a boost! Wow, I'm really happy now, I've finally volt modded my Commdo. 9500GT next, I've ordered some 100k's and 50k's for Voltmodding stuff..

Thansk for all the help lads, you guys have been really helpful!!
You're welcome. And honestly, you could use a 50K or 100K for each mod for the purposes you are putting it to.
Edited by Patch - 1/13/10 at 8:26pm
24/7
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600K @ 5.0 ghz 1.4v Gigabyte UD4 GTX 580 Lightning Ripjaws 2133Mhz 7-10-10-27 
Hard DriveOSMonitorPower
Kingston 128 SSD Win7 64 Samsung 245T HX1000 
Case
Lian Li 
  hide details  
Reply
24/7
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600K @ 5.0 ghz 1.4v Gigabyte UD4 GTX 580 Lightning Ripjaws 2133Mhz 7-10-10-27 
Hard DriveOSMonitorPower
Kingston 128 SSD Win7 64 Samsung 245T HX1000 
Case
Lian Li 
  hide details  
Reply
post #786 of 1336
Quote:
Originally Posted by Patch View Post

You're welcome. And honestly, you could use a 50K or 100K for each mod for the purposes you are putting it to.

I didn't fully understand the sentence.
You think I should only use the same VR's like 50K for a volt mod. like 50k all the way at the commando or 100k all the way?

Do you think it will hurt the board to run 100k VR for Vcore and 47k for Vdrop?

Regards Kriz
Classifried
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeno W3520. Asus Rampage III Extreme. Asus GTX 295 Dual-PCB and HIS 4870x2 Corsair Dominator GT 2000mhz CL8 
Hard DriveOptical DriveOSMonitor
SATA And IDE.. LG Win 7, XP and Vista SyncMaster 206BW 20" 
KeyboardPowerCaseMouse
Dell Ps2 Corsair AX850 2 Meter longe table for benching. Razer Deathadder 
Mouse Pad
Razer 
  hide details  
Reply
Classifried
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeno W3520. Asus Rampage III Extreme. Asus GTX 295 Dual-PCB and HIS 4870x2 Corsair Dominator GT 2000mhz CL8 
Hard DriveOptical DriveOSMonitor
SATA And IDE.. LG Win 7, XP and Vista SyncMaster 206BW 20" 
KeyboardPowerCaseMouse
Dell Ps2 Corsair AX850 2 Meter longe table for benching. Razer Deathadder 
Mouse Pad
Razer 
  hide details  
Reply
post #787 of 1336
Regarding the Commando resistors.

1) The vcore mods I've seen usually have a 50K resistor. A 100K resistor at full resistance will give you less of a response on boot up, i.e. it will be "safer". As you turn the trimmer to decrease resistance and increase vcore, the amount of change you see from each turn will increase more rapidly the farther you go. So you'll have to be more careful at the highest voltages because a little bit of a turn will give you a much larger response.

2) The Vdroop mod I've seen both 50K and 100K resistors used. The difference you'd see between using the two resistors follows the same logic described above.

Some examples of the different ones used:



24/7
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600K @ 5.0 ghz 1.4v Gigabyte UD4 GTX 580 Lightning Ripjaws 2133Mhz 7-10-10-27 
Hard DriveOSMonitorPower
Kingston 128 SSD Win7 64 Samsung 245T HX1000 
Case
Lian Li 
  hide details  
Reply
24/7
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600K @ 5.0 ghz 1.4v Gigabyte UD4 GTX 580 Lightning Ripjaws 2133Mhz 7-10-10-27 
Hard DriveOSMonitorPower
Kingston 128 SSD Win7 64 Samsung 245T HX1000 
Case
Lian Li 
  hide details  
Reply
post #788 of 1336
Thread Starter 
so patch you can only use EVGA hardware with the 4x classified?
post #789 of 1336
Quote:
Originally Posted by tha d0ctor View Post
so patch you can only use EVGA hardware with the 4x classified?
The EVbot is the only thing that's restricted to a few EVGA motherboards.

You can use any hardware you want on the Classy 4way. I use more ATI cards than NVIDIA cards on it.
24/7
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600K @ 5.0 ghz 1.4v Gigabyte UD4 GTX 580 Lightning Ripjaws 2133Mhz 7-10-10-27 
Hard DriveOSMonitorPower
Kingston 128 SSD Win7 64 Samsung 245T HX1000 
Case
Lian Li 
  hide details  
Reply
24/7
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600K @ 5.0 ghz 1.4v Gigabyte UD4 GTX 580 Lightning Ripjaws 2133Mhz 7-10-10-27 
Hard DriveOSMonitorPower
Kingston 128 SSD Win7 64 Samsung 245T HX1000 
Case
Lian Li 
  hide details  
Reply
post #790 of 1336
Quote:
Originally Posted by Patch View Post
The EVbot is the only thing that's restricted to a few EVGA motherboards.

You can use any hardware you want on the Classy 4way. I use more ATI cards than NVIDIA cards on it.
I just wanna know what you do for a living, you got some serious harware
EVOLVE
(13 items)
 
  
CPUMotherboardGraphicsRAM
|i5 750-voltage may vary| |Foxconn Katana[Non GTI]| 380 4Gb |4Gb/Tridents@Clocked| 
Hard DriveOSMonitorPower
|[V3/60Gb][500Gb]| |Windows 7 64 bit| |LG-EW224| |Antec HCG750| 
Case
|Tech Station| 
  hide details  
Reply
EVOLVE
(13 items)
 
  
CPUMotherboardGraphicsRAM
|i5 750-voltage may vary| |Foxconn Katana[Non GTI]| 380 4Gb |4Gb/Tridents@Clocked| 
Hard DriveOSMonitorPower
|[V3/60Gb][500Gb]| |Windows 7 64 bit| |LG-EW224| |Antec HCG750| 
Case
|Tech Station| 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: General Volt Mods
Overclock.net › Forums › Volt Mods › General Volt Mods › The OCN Volt Mod Squad | HWbot's Finest | The Official Club