i am already past the point of no return... to much money and time spent on this project.. so i got to see it through. and i will show it here of course. It will probably take some time tho...
CP1-12726 is the pelteir i intend to use... 243 Qmax... running undervolted up to 6 volts.
So in theory i could cool 500w load while using 500-600watts of electricity, but i also need to remove 1300w of heat from the hot side... well this is from my head...
again.. two of them... one to cool the hot side of tec, second to chill the water on the cool side
The logical way to wire them would be 5 pairs but you would have a current requirement of 50 amps at 12v. (6v per TEC.)
If you'd got the ones I recommended you could of had 15amps at 12v (6v per TEC.) and had more than 500w cooling !!!