Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 1002

post #10011 of 28303
Hi again dudes! I've completely rerouted the air flow in my case and it's pretty neat. I'm at stock now though and idle temps go as low as 19 degrees Celcius. Load temps (P95) wont go over 50 degrees. I haven't tested at 4,0 ghz yet since something is ****ing up the overclocking. Everytime I've overclocked and try to start P95 the system freezes. I don't think it is the Vcore since I had it at 1.4 v with Low Vdroop. when I had it at 4 ghz yesterday I had 1.35 with High Vdroop (to 1.25 or something) and it still could run P95. What's wrong? BTW: Should I turn off all the Green Power things in BIOS? I've got a MSI Big Bang Fuzion
EDIT:
I've pumped it up to 4 ghz again now with a QPI Multi of 18x, VTT of 1.25 and Vcore of 1.35 (High Vdroop on so it drops the core voltage with about 0.1 volts under load). I'm running P95 now (been doing it for 16 min) and the vcore is 1.232v, temps have improved with a couple of degrees and it's now hovering between 70-74. Pops up to 75 sometimes too. Thanks for helping guys Dunno how long this OC will stay stable since the Vcore is so low. It's still a bit funny that it wouldnt run prime at all with 1.4vcore when vdroop was set to Low.
Edited by Reactions - 6/15/10 at 5:16am
Gaming PC
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 860 4 GHz @ 1.23v  ASUS P7P55D Deluxe ASUS HD 5970 Corsair Vengeance DDR3 1600MHz 8GB CL8 
Hard DriveHard DriveHard DriveCooling
Samsung Spinpoint F3 1 TB  Intel X25-M 80 GB Western Digital Caviar Green 2 TB Corsair H70 
OSMonitorKeyboardPower
Windows 7 Ultimate x64 BenQ XL2420T Filco Majestouch 2 /w Brown Switches Corsair HX 1000W 
CaseMouseMouse PadAudio
Corsair Obsidian 800D Zowie EC1 eVo QPAD CT|Large Black (custom made, solid colour) Sennheiser HD595 
Audio
Asus Xonar STX 
  hide details  
Reply
Gaming PC
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 860 4 GHz @ 1.23v  ASUS P7P55D Deluxe ASUS HD 5970 Corsair Vengeance DDR3 1600MHz 8GB CL8 
Hard DriveHard DriveHard DriveCooling
Samsung Spinpoint F3 1 TB  Intel X25-M 80 GB Western Digital Caviar Green 2 TB Corsair H70 
OSMonitorKeyboardPower
Windows 7 Ultimate x64 BenQ XL2420T Filco Majestouch 2 /w Brown Switches Corsair HX 1000W 
CaseMouseMouse PadAudio
Corsair Obsidian 800D Zowie EC1 eVo QPAD CT|Large Black (custom made, solid colour) Sennheiser HD595 
Audio
Asus Xonar STX 
  hide details  
Reply
post #10012 of 28303
Quote:
Originally Posted by Reactions View Post
Hi again dudes! I've completely rerouted the air flow in my case and it's pretty neat. I'm at stock now though and idle temps go as low as 19 degrees Celcius.
I'm right there with you with the airflow design. My temps are right there with you too. Check out my temps. This is the best airflow design for the case.
post #10013 of 28303
How the **** did you get a Vantage CPU-score of 52000?!
Gaming PC
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 860 4 GHz @ 1.23v  ASUS P7P55D Deluxe ASUS HD 5970 Corsair Vengeance DDR3 1600MHz 8GB CL8 
Hard DriveHard DriveHard DriveCooling
Samsung Spinpoint F3 1 TB  Intel X25-M 80 GB Western Digital Caviar Green 2 TB Corsair H70 
OSMonitorKeyboardPower
Windows 7 Ultimate x64 BenQ XL2420T Filco Majestouch 2 /w Brown Switches Corsair HX 1000W 
CaseMouseMouse PadAudio
Corsair Obsidian 800D Zowie EC1 eVo QPAD CT|Large Black (custom made, solid colour) Sennheiser HD595 
Audio
Asus Xonar STX 
  hide details  
Reply
Gaming PC
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 860 4 GHz @ 1.23v  ASUS P7P55D Deluxe ASUS HD 5970 Corsair Vengeance DDR3 1600MHz 8GB CL8 
Hard DriveHard DriveHard DriveCooling
Samsung Spinpoint F3 1 TB  Intel X25-M 80 GB Western Digital Caviar Green 2 TB Corsair H70 
OSMonitorKeyboardPower
Windows 7 Ultimate x64 BenQ XL2420T Filco Majestouch 2 /w Brown Switches Corsair HX 1000W 
CaseMouseMouse PadAudio
Corsair Obsidian 800D Zowie EC1 eVo QPAD CT|Large Black (custom made, solid colour) Sennheiser HD595 
Audio
Asus Xonar STX 
  hide details  
Reply
post #10014 of 28303
Quote:
Originally Posted by Reactions View Post
How the **** did you get a Vantage CPU-score of 52000?!
Physx
post #10015 of 28303
would anyone care to post their idle and load temps using the H50?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @ 3.375Ghz (1.320v) Asus P5Q Pro Turbo 2x 5770's in xfire 8Gb Geil @ 900mhz 
Hard DriveOptical DriveOSMonitor
2x Maxtor 500Gb 7200RPM LG Win 7 Ultimate 64 Samsung 
KeyboardPowerCaseMouse
i-rocks gaming Nox Krypton 800W Haf 922 i-rocks 1600 dpi laser 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @ 3.375Ghz (1.320v) Asus P5Q Pro Turbo 2x 5770's in xfire 8Gb Geil @ 900mhz 
Hard DriveOptical DriveOSMonitor
2x Maxtor 500Gb 7200RPM LG Win 7 Ultimate 64 Samsung 
KeyboardPowerCaseMouse
i-rocks gaming Nox Krypton 800W Haf 922 i-rocks 1600 dpi laser 
  hide details  
Reply
post #10016 of 28303
yay

i just orderd these scythe 110cfm fans, hopfully i will get them tomorrow or thursday, we will see how this effects temperatures.
http://www.newegg.com/Product/Produc...-060-_-Product

and i found these fans AFTER i bought these fans, so if the temperatures decrease noticably with a push pull with 110cfm, ill get these fans.
http://www.svc.com/y720dcd-25t1-gp.html




Edited by Sean W. - 6/16/10 at 12:45am
Super quiet
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960X @ 4.7ghz Asus X99-A SLI MSI GTX 980 Corsair Vengace 48gig 2440mhz 
Hard DriveCoolingCoolingCooling
Samsung 850 Evo 1TB Thermaltake Pacific W1 Alphacool 480, 240, 120 MCP655 Vari 
CoolingOSMonitorPower
2x EK full cover 980 waterblocks Windows 10 pro LG 34" 34UM95 Ultra Wide EVGA 850W G2 
Case
Rosewill Rise 
  hide details  
Reply
Super quiet
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960X @ 4.7ghz Asus X99-A SLI MSI GTX 980 Corsair Vengace 48gig 2440mhz 
Hard DriveCoolingCoolingCooling
Samsung 850 Evo 1TB Thermaltake Pacific W1 Alphacool 480, 240, 120 MCP655 Vari 
CoolingOSMonitorPower
2x EK full cover 980 waterblocks Windows 10 pro LG 34" 34UM95 Ultra Wide EVGA 850W G2 
Case
Rosewill Rise 
  hide details  
Reply
post #10017 of 28303
Rebuilding my rig in a CM690 case, and i would like to hear feedback on whether i should set my h50 to intake or exahaust?

Fan Setup:

2x120mm Cm R4 fans exhaust top
1x140mm CM stock intake front fan
Maybe add a bottom 120mm r4 as intake

so, which would be better for flow, making the H50 (gentle typhoon push/pull) as intake or exhaust?

In my antec 902 i had it as exhaust (never tried intake actually) but im thinking maybe having it as intake would blow over my mobo and ram a bit, maybe cooling them a bit? and then being sucked up through the 2 r4 top fans?

or should i just go exhaust like i had? or would that not allow for good airflow (2 top exahuse and 2 rear exhaust and intake fans are in front and bottom?)

One extra note is that my 5850 does not exit heat through the back og the case, but rather around the card, in the case
post #10018 of 28303
Quote:
Originally Posted by saiyanzzrage View Post
Rebuilding my rig in a CM690 case, and i would like to hear feedback on whether i should set my h50 to intake or exahaust?

Fan Setup:

2x120mm Cm R4 fans exhaust top
1x140mm CM stock intake front fan
Maybe add a bottom 120mm r4 as intake

so, which would be better for flow, making the H50 (gentle typhoon push/pull) as intake or exhaust?

In my antec 902 i had it as exhaust (never tried intake actually) but im thinking maybe having it as intake would blow over my mobo and ram a bit, maybe cooling them a bit? and then being sucked up through the 2 r4 top fans?

or should i just go exhaust like i had? or would that not allow for good airflow (2 top exahuse and 2 rear exhaust and intake fans are in front and bottom?)

One extra note is that my 5850 does not exit heat through the back og the case, but rather around the card, in the case
anyone?
post #10019 of 28303
Quote:
Originally Posted by saiyanzzrage View Post
Rebuilding my rig in a CM690 case, and i would like to hear feedback on whether i should set my h50 to intake or exahaust?

Fan Setup:

2x120mm Cm R4 fans exhaust top
1x140mm CM stock intake front fan
Maybe add a bottom 120mm r4 as intake

so, which would be better for flow, making the H50 (gentle typhoon push/pull) as intake or exhaust?

In my antec 902 i had it as exhaust (never tried intake actually) but im thinking maybe having it as intake would blow over my mobo and ram a bit, maybe cooling them a bit? and then being sucked up through the 2 r4 top fans?

or should i just go exhaust like i had? or would that not allow for good airflow (2 top exahuse and 2 rear exhaust and intake fans are in front and bottom?)

One extra note is that my 5850 does not exit heat through the back og the case, but rather around the card, in the case


Maybe test them both(that won't be any hassle - its just switching the H50 fans between exhaust/intake & some other fans - just a case airflow test)... it would be better if you decide which cools better for you on your own testings.. since at all honestly it isn't the same for everyone... unless someone with your exact case has your exact set up & clock/voltages etc... as well.

But as for me right now(even if my H50 is beat up currently), on my CM590, I have my front 2 Intake(1 top *CPU level* & 1 bottom *hard drives level*), 2 side panel Intake, 2 top Exhaust & then the H50 @ rear mount + push/pull exhaust... all CM R4's fans(all running at 1800rpm), the PSU corsair tx850w bottom intake / rear exhaust.... its doing alright for me. Now... both of my video cards throw their heat through the rear of the case, so my vidcards heat effect is different. And of my testing as for the H50 as Exhaust gave me a better temp than Intake.

I would suggest you experiment and test.. to see what comes out better for you.. since you are rebuilding the set up.. you have time to do such tests of better air flow.
Edited by sendblink23 - 6/16/10 at 10:37am
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
post #10020 of 28303
Intake. CM690 has 2 top exhausts. You can add that R4 on the bottom to create an air current in your case.
Red Mist
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-930 @ 3.6GHz 1.13v Asus Rampage III Extreme 2x EVGA GTX 260 (192 & 216) SuperClocked 6GB (3x2GB) Corsair Dominator GT 1600mhz 
Hard DriveOSMonitorPower
2x Samsung F3's 1TB RAID 0 Windows 7 Professional x64 Samsung LED BX2450 Corsair TX 750 
CaseMouse
Cooler Master HAF X Logitech G500 
  hide details  
Reply
Red Mist
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-930 @ 3.6GHz 1.13v Asus Rampage III Extreme 2x EVGA GTX 260 (192 & 216) SuperClocked 6GB (3x2GB) Corsair Dominator GT 1600mhz 
Hard DriveOSMonitorPower
2x Samsung F3's 1TB RAID 0 Windows 7 Professional x64 Samsung LED BX2450 Corsair TX 750 
CaseMouse
Cooler Master HAF X Logitech G500 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club