Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 1014

post #10131 of 28303
Quote:
Originally Posted by Ceadderman View Post
Not much airflow for a push/pull in a Cosmos is there?

Don't get me wrong the Pure Black Edition was my first case choice but this 932 was just nicer on the budget. If I could have found one for less than $200, I would have gotten it instead.

But I do like the High Air Flow of the 932. It allows me to exhaust my H50 at the ceiling.

Been running for a bit over 6 hours now and am dead on at 35c average temp. Checked the thermostat and it kicks the heat over at 75F So I'm running pretty close to my ambient.

The more I run the more I like this Cooler.

~Ceadder
I figured with 2 top exhaust fans and one bottom fan to pull in cool air it would be a decent amount of airflow in this case. So I thought why not setup push/pull and see what happens and I had no gains

Any recommendations on fan replacements over stock for this case? I don't really care about noise, well as long as it doesn't sound like a server I'll be fine just wanna cool everything as much as possible.

I paid about $140 for my Cosmos close to two years ago and it seemed like a pretty solid case then.

Also I don't see the pump RPM's in Everest or HW monitor I only see the "CPU" fan and my NB fan.
post #10132 of 28303
Well if you're running the stock dampener material, little fear of noise I imagine. lol

I'm running these...Yate Loon CLEAR 120mm High Speed Silent Case Fan with Red LED

If you don't like LEDs' or if you don't have a need for LED fans you can get them in simple Black. Rated at 88cfm, 2200 RPM, and have a dB level of 40. If you want another color LED they have blue and green in stock. I'm also using the same style in a 140 which replaced my stock Exhaust, its specs are 140cfm, 2000 RPM and 45 dB. All 4 of my fans are 25mm thick so they'll fit wherever you have a stock fan.

~Ceadder



Quote:
Originally Posted by AdvanSuper View Post
I figured with 2 top exhaust fans and one bottom fan to pull in cool air it would be a decent amount of airflow in this case. So I thought why not setup push/pull and see what happens and I had no gains

Any recommendations on fan replacements over stock for this case? I don't really care about noise, well as long as it doesn't sound like a server I'll be fine just wanna cool everything as much as possible.

I paid about $140 for my Cosmos close to two years ago and it seemed like a pretty solid case then.

Also I don't see the pump RPM's in Everest or HW monitor I only see the "CPU" fan and my NB fan.
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #10133 of 28303
Need a link to your site Wolf...

If you have a photobucket account you can [IMG] link them to most forums just like opening a file on your system and looking at the particular pic you're referencing.

Spectacular that this is your 1st build. Never too young to try it. Age is relative.

~Ceadder

Quote:
Originally Posted by wolfmancha View Post
going for quiet & H50 was the key to that... push/pull with shrouds...more pics at my site

feedback appreciated

don't know where the pics went???? maybe someone can inform me on that..
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #10134 of 28303
Is there a way to use the h50 in 5.25 bays w/o modding something?
post #10135 of 28303
Quote:
Originally Posted by Ceadderman View Post
Well if you're running the stock dampener material, little fear of noise I imagine. lol

I'm running these...Yate Loon CLEAR 120mm High Speed Silent Case Fan with Red LED

If you don't like LEDs' or if you don't have a need for LED fans you can get them in simple Black. Rated at 88cfm, 2200 RPM, and have a dB level of 40. If you want another color LED they have blue and green in stock. I'm also using the same style in a 140 which replaced my stock Exhaust, its specs are 140cfm, 2000 RPM and 45 dB. All 4 of my fans are 25mm thick so they'll fit wherever you have a stock fan.

~Ceadder
These?
http://www.performance-pcs.com/catal...ducts_id=27361

What are those options at the bottom?
Quote:
Cable:
Sleeve Color:
Heatshrink Color:
You're just using that as an exhaust fan or replaced all your fans with it?
post #10136 of 28303
I have 3 Exhausts total. 140 in the stock location of my HAF. Then Stock RED LED 230mm in the stock location at the top. Then I have the puller fan in place at the moment set to exhaust. w/o the Right side door on(which includes another 230) I'm getting average temps of 35c, ambient temp right now is... 70F(I apologize for lack of conversion folks) so I think I'm running at ambients right now.

YouTube- My HAF 932...

Anyway the top scroll feature is set up so you can either keep the fan sleeved or you can save some dough by rolling it back to stock, saving $3 for the service. If you plan to sleeve one style of sleeving then I wouldn't even get them sleeved. The type of sleeving I'm going to get is pretty close to cloth weave. It's not cloth but one of the OCN members here sells it. Now that my Dremel is on hold() I'm going to sleeve my gear.

~Ceadder

Quote:
Originally Posted by AdvanSuper View Post
These?
http://www.performance-pcs.com/catal...ducts_id=27361

What are those options at the bottom?


You're just using that as an exhaust fan or replaced all your fans with it?

Edited by Ceadderman - 6/19/10 at 1:28pm
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #10137 of 28303
Quote:
Originally Posted by Quorwyf View Post
Is there a way to use the h50 in 5.25 bays w/o modding something?
Simple just use cable ties (to hang & tight it on the 5.25 bay area) & you are good to go
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
post #10138 of 28303
Ok a few more things... I think I am going to order 2 140mm fans since I only have 2 140mm slots. I'm gonna run the 120mm Yate fans on the rad in push/pull and swap a higher cfm fan on the bottom. Now should I invest in a fan controller for these? Is that a decent setup for the Cosmos?

My H50 is currently mounted to my rear fan or should I mount it up top? I'm open to suggestions and whichever is a better option or setup.
post #10139 of 28303
Don't the CoolerMaster R4 fans push more air at a lower noise level compared to the Yate and many others?
 
pfSense Box
(9 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX-8350 Black Edition @ 4.0GHz Asus Crosshair V Formula-Z XFX Black Edition Double D R9-280 3GB Corsair Ballistix Sport DDR3-1600 16GB 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 EVO 250GB Seagate Barracuda 1TB 7200RPM 6.0GB/s Seagate Barracuda 1TB 7200RPM 6.0GB/s LiteOn CD/DVD-RW 
CoolingOSMonitorMonitor
Corsair H80i + 2x Corsair SP120 + 4x CM SickleF... Windows 8.1 x64 HP 2310m Acer x223w 
KeyboardPowerCaseMouse
Razer Black Widow Ultimate 2013 Edition Corsair HX-850 CM Storm Scout 2 Advanced Logitech G502 
Mouse PadAudio
Razer Goliathus Speed Standard Logitech G930 
CPUMotherboardGraphicsRAM
Intel Celeron C1037U N/A Integrated Crucial 2gb DDR3 SODIMM 
Hard DriveCoolingOSCase
Western Digital Black 1TB SATA 6GB/s Passive pfSense N/A 
Audio
Integrated 
  hide details  
Reply
 
pfSense Box
(9 items)
 
 
CPUMotherboardGraphicsRAM
AMD FX-8350 Black Edition @ 4.0GHz Asus Crosshair V Formula-Z XFX Black Edition Double D R9-280 3GB Corsair Ballistix Sport DDR3-1600 16GB 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 EVO 250GB Seagate Barracuda 1TB 7200RPM 6.0GB/s Seagate Barracuda 1TB 7200RPM 6.0GB/s LiteOn CD/DVD-RW 
CoolingOSMonitorMonitor
Corsair H80i + 2x Corsair SP120 + 4x CM SickleF... Windows 8.1 x64 HP 2310m Acer x223w 
KeyboardPowerCaseMouse
Razer Black Widow Ultimate 2013 Edition Corsair HX-850 CM Storm Scout 2 Advanced Logitech G502 
Mouse PadAudio
Razer Goliathus Speed Standard Logitech G930 
CPUMotherboardGraphicsRAM
Intel Celeron C1037U N/A Integrated Crucial 2gb DDR3 SODIMM 
Hard DriveCoolingOSCase
Western Digital Black 1TB SATA 6GB/s Passive pfSense N/A 
Audio
Integrated 
  hide details  
Reply
post #10140 of 28303
Quote:
Originally Posted by johnny.dot.exe View Post
Don't the CoolerMaster R4 fans push more air at a lower noise level compared to the Yate and many others?
These?
http://www.newegg.com/Product/Produc...82E16835103063

As per the reviews they only push about 70CFM and are way noisier than 19db on full load.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club