Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 1021

post #10201 of 28306
Quote:
Originally Posted by johnny.dot.exe View Post
There is something wrong if you're idling at 50c and hitting 90c under load. Either the heatsink is flawed and not seating properly, or the thermal compound is either crap or not applied properly, or you don't have optimal airflow pathes in that case. Either way, something isn't right there. Is 1.33v a lot compared to the oem voltage of that CPU? If you're running an overclock, maybe you should downclock it...

Edit : In your User CP, click add/edit your system. This way you can have all your specs in your sig, which helps us help you.
the VID i got from the bios when i set it to auto was 1.3
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 860 @ 4.1 Asus Maximus Formula III evga 470 gtx sli ocz plat 4 gb pc-16000 
OSCase
windows 7 thermaltake armor 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 860 @ 4.1 Asus Maximus Formula III evga 470 gtx sli ocz plat 4 gb pc-16000 
OSCase
windows 7 thermaltake armor 
  hide details  
Reply
post #10202 of 28306
On my last days off I installed a fan controller, as well as 2 UK 3000's and shrouds. However, when i went to put my side panel back on, it was a little rough going with my Antec 900's side fan pressing against the one UK. O managed to get my side panel off, but I'm not happy with it. I like it to close nice and flush. I know if I remove the one shroud that is on the pull fan, it will fit perfectly again, so is that shroud really necessary?

Also, I have my pump connected to my motherboard, and the highest I have seen it go is 1330RPM. It usually fluctuates between 1320-1330RPM. I don't want to have to connect it directly to my PSU, as this will cause unsightly cables to show more. Does anyone have experience with a particular MB header that will give it the proper RPM's? It's a three pin, and since I have my MB to ignore my CPU_FAN header to avoid the boot up beep, would it be better to connect it there? I also have a PWR_FAN header close that I could connect it to, so would that be better?

I had already tried to ignore the header it's connected to in BIOS, but Everest still reports the RPMs as 1320-1330.

Thanks!
Hephaestus
(22 items)
 
  
CPUMotherboardGraphicsGraphics
Core i5 2500K [4.5Ghz][100x45][1.29v] MSi P67A-GD65 [1.9 BIOS] MSi GTX670 PE OC MSi GTX670 PE OC 
RAMHard DriveHard DriveHard Drive
16GB Corsair Vengeance 1600Mhz [9-9-9-24] Crucial M4 256GB [CORE] WD Caviar Black 1TB [FILEZ] WD Caviar Black 2TB [GAMEZ] 
Optical DriveCoolingOSMonitor
LG Blu-Ray Combo Corsair H50 [Push/Pull][UltraKaze 3Ks] Windows 7 Ultimate x64 Retail SP1 Yamakasi Catleap Q270 27" S-IPS 
KeyboardPowerCaseMouse
Logitech G110 Antec TP-750 Blue Lian Li Lancool PC-K62 Razer Naga Epic 
Mouse PadAudioAudioAudio
Razer Goliathus Fragger Speed  X-Fi Titanium Logitech z5300 5.1 Logitech G930 
OtherOther
MS LifeCam Studio 1080p Belkin n52te 
  hide details  
Reply
Hephaestus
(22 items)
 
  
CPUMotherboardGraphicsGraphics
Core i5 2500K [4.5Ghz][100x45][1.29v] MSi P67A-GD65 [1.9 BIOS] MSi GTX670 PE OC MSi GTX670 PE OC 
RAMHard DriveHard DriveHard Drive
16GB Corsair Vengeance 1600Mhz [9-9-9-24] Crucial M4 256GB [CORE] WD Caviar Black 1TB [FILEZ] WD Caviar Black 2TB [GAMEZ] 
Optical DriveCoolingOSMonitor
LG Blu-Ray Combo Corsair H50 [Push/Pull][UltraKaze 3Ks] Windows 7 Ultimate x64 Retail SP1 Yamakasi Catleap Q270 27" S-IPS 
KeyboardPowerCaseMouse
Logitech G110 Antec TP-750 Blue Lian Li Lancool PC-K62 Razer Naga Epic 
Mouse PadAudioAudioAudio
Razer Goliathus Fragger Speed  X-Fi Titanium Logitech z5300 5.1 Logitech G930 
OtherOther
MS LifeCam Studio 1080p Belkin n52te 
  hide details  
Reply
post #10203 of 28306
Use one of the 3pin to 4pin molex adapters that came with the Scythe fans. Plug the yellow wire to the cpu fan header. That will give guaranteed full power to the pump and allows you to monitor the pump rpm.
Shhh
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 @ 4Ghz Asus P5Q-E Sapphire HD5870 G.Skill 2x2Gb 
Hard DriveOptical DriveOSMonitor
Intel 80GB SSD/Seagate 500x2 Raid LiteON IHAS324-08 Win 7 Pro 64bit Dell UltraSharp 2408WFP 
PowerCase
Corsair HX750 Lancool K58 
  hide details  
Reply
Shhh
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 @ 4Ghz Asus P5Q-E Sapphire HD5870 G.Skill 2x2Gb 
Hard DriveOptical DriveOSMonitor
Intel 80GB SSD/Seagate 500x2 Raid LiteON IHAS324-08 Win 7 Pro 64bit Dell UltraSharp 2408WFP 
PowerCase
Corsair HX750 Lancool K58 
  hide details  
Reply
post #10204 of 28306
Quote:
Originally Posted by looser101 View Post
Use one of the 3pin to 4pin molex adapters that came with the Scythe fans. Plug the yellow wire to the cpu fan header. That will give guaranteed full power to the pump and allows you to monitor the pump rpm.
I'll try that. Thanks.

EDIT: But doesn't that mean I have to plug it into a 4-pin Molex connector off of my PSU then? I'm trying to avoid that.
Edited by Demented - 6/20/10 at 5:35pm
Hephaestus
(22 items)
 
  
CPUMotherboardGraphicsGraphics
Core i5 2500K [4.5Ghz][100x45][1.29v] MSi P67A-GD65 [1.9 BIOS] MSi GTX670 PE OC MSi GTX670 PE OC 
RAMHard DriveHard DriveHard Drive
16GB Corsair Vengeance 1600Mhz [9-9-9-24] Crucial M4 256GB [CORE] WD Caviar Black 1TB [FILEZ] WD Caviar Black 2TB [GAMEZ] 
Optical DriveCoolingOSMonitor
LG Blu-Ray Combo Corsair H50 [Push/Pull][UltraKaze 3Ks] Windows 7 Ultimate x64 Retail SP1 Yamakasi Catleap Q270 27" S-IPS 
KeyboardPowerCaseMouse
Logitech G110 Antec TP-750 Blue Lian Li Lancool PC-K62 Razer Naga Epic 
Mouse PadAudioAudioAudio
Razer Goliathus Fragger Speed  X-Fi Titanium Logitech z5300 5.1 Logitech G930 
OtherOther
MS LifeCam Studio 1080p Belkin n52te 
  hide details  
Reply
Hephaestus
(22 items)
 
  
CPUMotherboardGraphicsGraphics
Core i5 2500K [4.5Ghz][100x45][1.29v] MSi P67A-GD65 [1.9 BIOS] MSi GTX670 PE OC MSi GTX670 PE OC 
RAMHard DriveHard DriveHard Drive
16GB Corsair Vengeance 1600Mhz [9-9-9-24] Crucial M4 256GB [CORE] WD Caviar Black 1TB [FILEZ] WD Caviar Black 2TB [GAMEZ] 
Optical DriveCoolingOSMonitor
LG Blu-Ray Combo Corsair H50 [Push/Pull][UltraKaze 3Ks] Windows 7 Ultimate x64 Retail SP1 Yamakasi Catleap Q270 27" S-IPS 
KeyboardPowerCaseMouse
Logitech G110 Antec TP-750 Blue Lian Li Lancool PC-K62 Razer Naga Epic 
Mouse PadAudioAudioAudio
Razer Goliathus Fragger Speed  X-Fi Titanium Logitech z5300 5.1 Logitech G930 
OtherOther
MS LifeCam Studio 1080p Belkin n52te 
  hide details  
Reply
post #10205 of 28306
Just want to make sure I did this right. I got the pump in the pwr header. two scythe GT with a splitter into the CPU header. Stock I am running about 34C right now. Seems a little Hot. 100% load w/ prime I get around 55-58. This is all stock.

But for 4.0 GHZ I idle around 41-43 and full load around 70. I am using an 800D case so i figure that I might be restricting a little much since this case has an air cool issue, but wouldn't think of it to matter that much. need to replace the stock 140's, they suck for intakes. Would a shroud after my push GT help?

NOTE: what is weird is prior to overclocking i was getting idles stock around 29-30 and now they are at 34-35. Any ideas?
    
CPUMotherboardGraphicsRAM
i7 970 Asus Rampage III Extreme Evga GTX 480 3x 2 GB Corsair DDR1600 Dominator 
Hard DriveOptical DriveOSMonitor
Intel 160 GB X25-M SSD, 2x 1.0 TB 7200RPM RAID 1 Lite-on DVD-RW Win 7 64-bit 23" Samsung PX2370 LED 
KeyboardPowerCaseMouse
Razer Lycos Corsair 750TX Corsair 800D Logitech MX518 
Mouse Pad
Razer Goliathus CE 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 970 Asus Rampage III Extreme Evga GTX 480 3x 2 GB Corsair DDR1600 Dominator 
Hard DriveOptical DriveOSMonitor
Intel 160 GB X25-M SSD, 2x 1.0 TB 7200RPM RAID 1 Lite-on DVD-RW Win 7 64-bit 23" Samsung PX2370 LED 
KeyboardPowerCaseMouse
Razer Lycos Corsair 750TX Corsair 800D Logitech MX518 
Mouse Pad
Razer Goliathus CE 
  hide details  
Reply
post #10206 of 28306
Quote:
Originally Posted by Demented View Post
I'll try that. Thanks.

EDIT: But doesn't that mean I have to plug it into a 4-pin Molex connector off of my PSU then? I'm trying to avoid that.
Well... yes, but that's the only way to ensure full power. At least try it if only to convince yourself 1300rpm is all your particular pump will do.
Shhh
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 @ 4Ghz Asus P5Q-E Sapphire HD5870 G.Skill 2x2Gb 
Hard DriveOptical DriveOSMonitor
Intel 80GB SSD/Seagate 500x2 Raid LiteON IHAS324-08 Win 7 Pro 64bit Dell UltraSharp 2408WFP 
PowerCase
Corsair HX750 Lancool K58 
  hide details  
Reply
Shhh
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 @ 4Ghz Asus P5Q-E Sapphire HD5870 G.Skill 2x2Gb 
Hard DriveOptical DriveOSMonitor
Intel 80GB SSD/Seagate 500x2 Raid LiteON IHAS324-08 Win 7 Pro 64bit Dell UltraSharp 2408WFP 
PowerCase
Corsair HX750 Lancool K58 
  hide details  
Reply
post #10207 of 28306
Quote:
Originally Posted by looser101 View Post
Well... yes, but that's the only way to ensure full power. At least try it if only to convince yourself 1300rpm is all your particular pump will do.
True, guess it's worth a shot. Thanks.
Hephaestus
(22 items)
 
  
CPUMotherboardGraphicsGraphics
Core i5 2500K [4.5Ghz][100x45][1.29v] MSi P67A-GD65 [1.9 BIOS] MSi GTX670 PE OC MSi GTX670 PE OC 
RAMHard DriveHard DriveHard Drive
16GB Corsair Vengeance 1600Mhz [9-9-9-24] Crucial M4 256GB [CORE] WD Caviar Black 1TB [FILEZ] WD Caviar Black 2TB [GAMEZ] 
Optical DriveCoolingOSMonitor
LG Blu-Ray Combo Corsair H50 [Push/Pull][UltraKaze 3Ks] Windows 7 Ultimate x64 Retail SP1 Yamakasi Catleap Q270 27" S-IPS 
KeyboardPowerCaseMouse
Logitech G110 Antec TP-750 Blue Lian Li Lancool PC-K62 Razer Naga Epic 
Mouse PadAudioAudioAudio
Razer Goliathus Fragger Speed  X-Fi Titanium Logitech z5300 5.1 Logitech G930 
OtherOther
MS LifeCam Studio 1080p Belkin n52te 
  hide details  
Reply
Hephaestus
(22 items)
 
  
CPUMotherboardGraphicsGraphics
Core i5 2500K [4.5Ghz][100x45][1.29v] MSi P67A-GD65 [1.9 BIOS] MSi GTX670 PE OC MSi GTX670 PE OC 
RAMHard DriveHard DriveHard Drive
16GB Corsair Vengeance 1600Mhz [9-9-9-24] Crucial M4 256GB [CORE] WD Caviar Black 1TB [FILEZ] WD Caviar Black 2TB [GAMEZ] 
Optical DriveCoolingOSMonitor
LG Blu-Ray Combo Corsair H50 [Push/Pull][UltraKaze 3Ks] Windows 7 Ultimate x64 Retail SP1 Yamakasi Catleap Q270 27" S-IPS 
KeyboardPowerCaseMouse
Logitech G110 Antec TP-750 Blue Lian Li Lancool PC-K62 Razer Naga Epic 
Mouse PadAudioAudioAudio
Razer Goliathus Fragger Speed  X-Fi Titanium Logitech z5300 5.1 Logitech G930 
OtherOther
MS LifeCam Studio 1080p Belkin n52te 
  hide details  
Reply
post #10208 of 28306
Regarding modding the H50 : res + UV Dye + clear tubes

I need to know the quantity of the UV Dye bottle to add to the stock H50's coolant ?
like this UV Dye bottle:
http://www.frozencpu.com/products/70...tl=g30c103s185

and what do u advice for clear tubing with green line surrounding + size + long ? and Barbs & Quantities ?
Edited by alayoubi - 6/20/10 at 6:47pm
My PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
C2Q Q9550@ 3800 mhz MSI P45 Platinum Zotac 9800GT 1GB DDR3 Kingston HyperX 4GB DDR2 1066 
Hard DriveOptical DriveOSMonitor
2x Samsung 320GB in Raid0 Sony nec DVD-RW 20x Sata Windows XP/7 LCD HP 19" 1955 
PowerCase
GB 800w Odin Pro NZXT Tempest 
  hide details  
Reply
My PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
C2Q Q9550@ 3800 mhz MSI P45 Platinum Zotac 9800GT 1GB DDR3 Kingston HyperX 4GB DDR2 1066 
Hard DriveOptical DriveOSMonitor
2x Samsung 320GB in Raid0 Sony nec DVD-RW 20x Sata Windows XP/7 LCD HP 19" 1955 
PowerCase
GB 800w Odin Pro NZXT Tempest 
  hide details  
Reply
post #10209 of 28306
Dude you're overclocked, of course it's going to read hotter.

You're getting 34c @ idle is damn good for an Intel. My lapped 955 BE setup is marking that @ idle as well. 34 is a solid temp and that you're running Prime @ 100% load you should see as significant an increase as you have. I would think something was wrong otherwise.

~Ceadder

Quote:
Originally Posted by Kylechx View Post
Just want to make sure I did this right. I got the pump in the pwr header. two scythe GT with a splitter into the CPU header. Stock I am running about 34C right now. Seems a little Hot. 100% load w/ prime I get around 55-58. This is all stock.

But for 4.0 GHZ I idle around 41-43 and full load around 70. I am using an 800D case so i figure that I might be restricting a little much since this case has an air cool issue, but wouldn't think of it to matter that much. need to replace the stock 140's, they suck for intakes. Would a shroud after my push GT help?

NOTE: what is weird is prior to overclocking i was getting idles stock around 29-30 and now they are at 34-35. Any ideas?
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #10210 of 28306
Quote:
Originally Posted by Ceadderman View Post
Dude you're overclocked, of course it's going to read hotter.

You're getting 34c @ idle is damn good for an Intel. My lapped 955 BE setup is marking that @ idle as well. 34 is a solid temp and that you're running Prime @ 100% load you should see as significant an increase as you have. I would think something was wrong otherwise.

~Ceadder
it was 34 stock. it idles at 43 OC. just in case you didn't notice that
    
CPUMotherboardGraphicsRAM
i7 970 Asus Rampage III Extreme Evga GTX 480 3x 2 GB Corsair DDR1600 Dominator 
Hard DriveOptical DriveOSMonitor
Intel 160 GB X25-M SSD, 2x 1.0 TB 7200RPM RAID 1 Lite-on DVD-RW Win 7 64-bit 23" Samsung PX2370 LED 
KeyboardPowerCaseMouse
Razer Lycos Corsair 750TX Corsair 800D Logitech MX518 
Mouse Pad
Razer Goliathus CE 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 970 Asus Rampage III Extreme Evga GTX 480 3x 2 GB Corsair DDR1600 Dominator 
Hard DriveOptical DriveOSMonitor
Intel 160 GB X25-M SSD, 2x 1.0 TB 7200RPM RAID 1 Lite-on DVD-RW Win 7 64-bit 23" Samsung PX2370 LED 
KeyboardPowerCaseMouse
Razer Lycos Corsair 750TX Corsair 800D Logitech MX518 
Mouse Pad
Razer Goliathus CE 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club