Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 1038

post #10371 of 28306
Quote:
Originally Posted by AdvanSuper View Post
I could try exhaust but that would then leave me with only one bottom intake... I only have 3 120mm fans... 2 are identical 90CFM fans and the other is my Ultra Kaze I am using as a lower intake.

Unless I turn one top 140mm into and intake?

I do not have a shroud nor know which/what size to get.
Buy some more fans then.... Shrouds could be 38 or 25 which ever works nice - get a really cheap 120mm fan, cut off the middle Fan and that equals to a Shroud - use that... you have to spend money to get improvements... you may leave your current fans where they are.. wait until you buy extra fans for the H50 mounting plan.
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
post #10372 of 28306
Quote:
Originally Posted by sendblink23 View Post
Buy some more fans then.... Shrouds could be 38 or 25 which ever works nice - get a really cheap 120mm fan, cut off the middle Fan and that equals to a Shroud - use that... you have to spend money to get improvements... you may leave your current fans where they are.. wait until you buy extra fans for the H50 mounting plan.
I already spent money on fans lol.. I bought the two 140mm and the Ultra Kaze and used the 90cfm ones in push/pull instead of spending money on more 120mm fans which have a little more or less cfm and rpm. How long of screws do I need for the shroud and fan when they screw into the rad??
post #10373 of 28306
Quote:
Originally Posted by AdvanSuper View Post
I already spent money on fans lol.. I bought the two 140mm and the Ultra Kaze and used the 90cfm ones in push/pull instead of spending money on more 120mm fans which have a little more or less cfm and rpm. How long of screws do I need for the shroud and fan when they screw into the rad??
On that I actually have no clue what are the sizes... I had some random screws on my garage and went creative on how to give use to them... look at my picture of my mount for a much more closer:

SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
SubCow
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom ii X4 965BE C3 @ 4.10Ghz (200x20.5) 1.5v MSI 790FX-GD70 Sapphire + XFX 5770's + EVGA 9800GTX+ 8gb (4 x 2gb) DDR3-1333 6-6-6-15-T1 
Hard DriveOptical DriveOSMonitor
1TB Hitachi - 500GB Seagate - 400GB Seagate LG DVD-RW Win 7 Ult x64 / Snow Leo 10.6.6 / Ubuntu 10.10 x64 AOC 2036S 20" + HP vs15 
KeyboardPowerCaseMouse
Agiler Wireless Corsair TX850w Rosewill Challenger - CM590(dead) Agiler Wireless 
  hide details  
Reply
post #10374 of 28306
I just tried the exhaust and the temps are the same. Oh wells... I have some crappy 120mm fans laying around I'll make a shroud and try to get some screws.
post #10375 of 28306
My bolts for my shroud(25mm^2) are long. 2" bolts would've been too short. I'm using 120mm fan silencers as gaskets to seal the leaks between fans. The Corsair Shroud has no LED bosses. So I'm going to adapt 3" bolts to fit using 2 6-32 pitch nuts per bolt and then lop off the excess.

Basically what you do is thread two retaining nuts most of the way to the head.(okay you Pervs not those kinds of nuts or heads) Insert the bolt into the threaded opening, taking care not to frag the vanes of the Rad. Then you back the 1st one as tight as it will go without snapping the ear. Then back the other one to it and give it enough pressure to lock it together. Then using a dremel, or a hacksaw blade or even a bolt cutter or pair or fragged nibs cut it as close to the bottom nut as possible. Don't worry about fragging the thread as it'll keep the nuts secure and from backing off the new bolt w/o loc-tite.

If you go with the ultra thick Deltas', this length won't work. You'll probably have to get a short one like sendblink here has done at the bottom of his setup. That's if the throughway isn't piped. If it is I suspect some modification to it is in order.

~Ceadder

Quote:
Originally Posted by sendblink23 View Post
On that I actually have no clue what are the sizes... I had some random screws on my garage and went creative on how to give use to them... look at my picture of my mount for a much more closer:

 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #10376 of 28306
I got tired of trying to find appropriate length 6-32 pitch bolts... so i just tapped the rad to take M4 thread and cut some bolts to length, ran a die over them and that worked fine.
    
CPUMotherboardGraphicsRAM
Phenom II X6 1100T Black Edition ASUS Crosshair IV Formula XFX 5970 2Gb BE + Sapphire 5870 1Gb Game Edition 4Gb OCZ DDR3 PC3-12800 BE CL8 
Hard DriveOptical DriveOSMonitor
OCZ Vertex 2 3.5 120GB E SSD + WD Caviar Black 1Tb ASUS DRW-24B1LT DVDRW W7 x64 Pro LG 21.5" LCD 
KeyboardPowerCaseMouse
Logitech G110 Corsair AX850 Sleeved Lian Li PC-P50WB Logitech G5 
Mouse Pad
Err... yes 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Phenom II X6 1100T Black Edition ASUS Crosshair IV Formula XFX 5970 2Gb BE + Sapphire 5870 1Gb Game Edition 4Gb OCZ DDR3 PC3-12800 BE CL8 
Hard DriveOptical DriveOSMonitor
OCZ Vertex 2 3.5 120GB E SSD + WD Caviar Black 1Tb ASUS DRW-24B1LT DVDRW W7 x64 Pro LG 21.5" LCD 
KeyboardPowerCaseMouse
Logitech G110 Corsair AX850 Sleeved Lian Li PC-P50WB Logitech G5 
Mouse Pad
Err... yes 
  hide details  
Reply
post #10377 of 28306
i got longer bolts and cut them down with a grinder
Super quiet
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960X @ 4.7ghz Asus X99-A SLI MSI GTX 980 Corsair Vengace 48gig 2440mhz 
Hard DriveCoolingCoolingCooling
Samsung 850 Evo 1TB Thermaltake Pacific W1 Alphacool 480, 240, 120 MCP655 Vari 
CoolingOSMonitorPower
2x EK full cover 980 waterblocks Windows 10 pro LG 34" 34UM95 Ultra Wide EVGA 850W G2 
Case
Rosewill Rise 
  hide details  
Reply
Super quiet
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 5960X @ 4.7ghz Asus X99-A SLI MSI GTX 980 Corsair Vengace 48gig 2440mhz 
Hard DriveCoolingCoolingCooling
Samsung 850 Evo 1TB Thermaltake Pacific W1 Alphacool 480, 240, 120 MCP655 Vari 
CoolingOSMonitorPower
2x EK full cover 980 waterblocks Windows 10 pro LG 34" 34UM95 Ultra Wide EVGA 850W G2 
Case
Rosewill Rise 
  hide details  
Reply
post #10378 of 28306
How did you tap the threaded ears on the rad? Did you bend the ears out away from the rad? I just tried tonight to run a 6-32 tap through to clean out a bad thread but there is not enough space between the ear and the rad fins to get the tap in far enough.

A 6-32 thumb screw ran through did the trick but just curious what you did.

Quote:
Originally Posted by digital_steve View Post
I got tired of trying to find appropriate length 6-32 pitch bolts... so i just tapped the rad to take M4 thread and cut some bolts to length, ran a die over them and that worked fine.
post #10379 of 28306
Quote:
Originally Posted by AdvanSuper View Post
I already spent money on fans lol.. I bought the two 140mm and the Ultra Kaze and used the 90cfm ones in push/pull instead of spending money on more 120mm fans which have a little more or less cfm and rpm. How long of screws do I need for the shroud and fan when they screw into the rad??
I have my H50 set up in push/pull with 25mm shrouds and the Ultra Kazes and I used 6-32 x 3/8" screws to attach the shrouds to the rad and then 6-32 x 2" screws to attach the Kazes to the shrouds and they worked perfect. The hardest part was attaching the shrouds since you have to put the 3/8" screws into the holes on the fan closest to the rad, making it necessary to screw them in at an angle, but with a flathead it wasn't too difficult.
Sulaco
(14 items)
 
 
MacBook Pro
(4 items)
 
CPUMotherboardGraphicsRAM
Phenom II X6 1090T Asus Crosshair IV Formula Sapphire 7950 3GB 2x2GB Mushkin Enhanced Blackline  
Hard DriveOSMonitorPower
2x150GB Velociraptor RAID 0 | 2x1TB Hitachi Windows 8 Asus VH242H OCZ ModXStream 700W 
Case
Cooler Master HAF 932 
CPUGraphicsOSMonitor
Core 2 Duo P8400 GeForce 9400M OSX Yosemite 13.3" LED-backlit 
  hide details  
Reply
Sulaco
(14 items)
 
 
MacBook Pro
(4 items)
 
CPUMotherboardGraphicsRAM
Phenom II X6 1090T Asus Crosshair IV Formula Sapphire 7950 3GB 2x2GB Mushkin Enhanced Blackline  
Hard DriveOSMonitorPower
2x150GB Velociraptor RAID 0 | 2x1TB Hitachi Windows 8 Asus VH242H OCZ ModXStream 700W 
Case
Cooler Master HAF 932 
CPUGraphicsOSMonitor
Core 2 Duo P8400 GeForce 9400M OSX Yosemite 13.3" LED-backlit 
  hide details  
Reply
post #10380 of 28306
Guys another noob question,What do I need to install my two Ultra kaze in a push/pull configuration?Is it enough with just the screws that come with the fans or do I need something else?
The One Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 930 @ 3.6 GHz Asus P6T X58 EVGA GTX 670 SSC 4GB Ripjaws 3x2GB 1600mhz 
Hard DriveOptical DriveOSMonitor
Samsung Spinpoint F3 1GB 7200rpm LITE-ON DVDRW LH-20A1L 7 Ultimate 64bit Optiquest 24" 1920x1200 
KeyboardPowerCaseMouse
Logitech G15 revision Corsair HX750w HAF 932 G500 
Mouse Pad
OCZ Bhemoth 
  hide details  
Reply
The One Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 930 @ 3.6 GHz Asus P6T X58 EVGA GTX 670 SSC 4GB Ripjaws 3x2GB 1600mhz 
Hard DriveOptical DriveOSMonitor
Samsung Spinpoint F3 1GB 7200rpm LITE-ON DVDRW LH-20A1L 7 Ultimate 64bit Optiquest 24" 1920x1200 
KeyboardPowerCaseMouse
Logitech G15 revision Corsair HX750w HAF 932 G500 
Mouse Pad
OCZ Bhemoth 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club