I am happy to say after working on a friends PC they bought me a H50 for labor...
Now I am not yet happy with the temps and after a week or so I may take it down and lap the booger and see what it yields!
What I have learned though is the I owned the Asetek LCLC 120 and it does differ in a few ways.
one the main difference in the H50 is the pump, and the housing uses a slightly different retention where it locks to the housing. Also the Radiator is a bit thinner on the H50 and a bit shorter on height and thickness. The screws on the H50 are a finer thread so my 6x32 x 1 1/4 would not thread into the rad for the push/pull configuration. I had to drill out the holes a tad to get them to thread in. Also the other thing I noticed is the braided power cable and the Hoses are longer then the Asetek LCLC 120mm So there you have it. Even though I had the Asetek Lapped bringing it down 9c the H50 right out the box beats it on the Load temps hands down.
Edited by BinaryBummer - 8/28/10 at 2:14am