Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 1515

post #15141 of 28466
Currently running a H50.

Can it handle adding a gtx 285 Hydro into the system?
post #15142 of 28466
I believe from reading most of the thread, that, No it cannot handle a cpu and gpu of that size. maybe a 3X120 rad?
The Nest
(15 items)
 
  
CPUMotherboardGraphicsRAM
Ph II X4 BE 980 @ 4.2Ghz Foxconn Destroyer EVGA GTX 780 SC (4) 2 Gb stix G.Skill DDR2 1066 
Hard DriveOptical DriveCoolingOS
Mushkin Chronos 120Gb SSD, Seagate 320Gb; 1Tb(ext) LightScribe DVDRW Corsair H70 -w- 2 Scythe Ultra Kaze 3000 fans p... Windows 7 64x 
MonitorKeyboardPowerCase
Acer 21.5" LCD Razor Blackwidow Ultimate Mushkin Joule 1000W Azza Solano 
MouseMouse PadAudio
Logitech laser Vat ees theese "mouse pad" jou speek of? Tampo... Klipsch ProMedia 2.1 THX 
  hide details  
Reply
The Nest
(15 items)
 
  
CPUMotherboardGraphicsRAM
Ph II X4 BE 980 @ 4.2Ghz Foxconn Destroyer EVGA GTX 780 SC (4) 2 Gb stix G.Skill DDR2 1066 
Hard DriveOptical DriveCoolingOS
Mushkin Chronos 120Gb SSD, Seagate 320Gb; 1Tb(ext) LightScribe DVDRW Corsair H70 -w- 2 Scythe Ultra Kaze 3000 fans p... Windows 7 64x 
MonitorKeyboardPowerCase
Acer 21.5" LCD Razor Blackwidow Ultimate Mushkin Joule 1000W Azza Solano 
MouseMouse PadAudio
Logitech laser Vat ees theese "mouse pad" jou speek of? Tampo... Klipsch ProMedia 2.1 THX 
  hide details  
Reply
post #15143 of 28466
Does anyone know if I install an H50 in a SG05 case, and I have an optical drive installed, can I run a push/pull config?
post #15144 of 28466
Quote:
Originally Posted by Jeramabih View Post
Idle temps this morning after running all night are 35c and after about 30 minutes of prime95 last night with a default bios I was leveling out at 55c. Not too sure if that's good, bad or average though. But it beats the 74c that I was getting in the Sonata with a Hyper212+!
Much better than me. I am currently idling at 39-42 and after 5 minutes of Prime95 I am at 70+. Thats on stock speeds.
post #15145 of 28466
An H50 in current form unless crazy modified, can do only a CPU... any time you have both a CPU and a GPU most people will recommend at least the area of a 360 rad...
Main Frame
(17 items)
 
Slave Frame
(13 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II X4 965  GIGABYTE GA-790FXTA-UD5 MSI R9 285 CORSAIR DOMINATOR DDR3 
Hard DriveHard DriveOptical DriveOptical Drive
Spinpoint F3 Crucial C300 SSD Samsung SH-S243N/BEBS Samsung SH-S243N/BEBS 
CoolingOSMonitorMonitor
Corsair H50 Windows 7-64bit Ultimate Samsung P2450H ASUS VS248H-P 
KeyboardPowerCaseMouse
Microsoft Bluetooth (First gen) BFG EX-1200 Thermaltake Black Armor Logitech G700 
CPUMotherboardGraphicsRAM
Athlon 3700+ Abit Fatilty SLI 9600 GSO (48SP) 4 x 1 Gb DDR OCZ Platnium 
Hard DriveOptical DriveOSMonitor
500 Gig - Samsung F3 Plextor DVD-R/RW Windows XP Pro (32Bit) POS 17" 
KeyboardPowerCaseMouse
$5 special at Target XFX 750Watt CM Scout Storm Logitech 
Mouse Pad
Steel Series 
  hide details  
Reply
Main Frame
(17 items)
 
Slave Frame
(13 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II X4 965  GIGABYTE GA-790FXTA-UD5 MSI R9 285 CORSAIR DOMINATOR DDR3 
Hard DriveHard DriveOptical DriveOptical Drive
Spinpoint F3 Crucial C300 SSD Samsung SH-S243N/BEBS Samsung SH-S243N/BEBS 
CoolingOSMonitorMonitor
Corsair H50 Windows 7-64bit Ultimate Samsung P2450H ASUS VS248H-P 
KeyboardPowerCaseMouse
Microsoft Bluetooth (First gen) BFG EX-1200 Thermaltake Black Armor Logitech G700 
CPUMotherboardGraphicsRAM
Athlon 3700+ Abit Fatilty SLI 9600 GSO (48SP) 4 x 1 Gb DDR OCZ Platnium 
Hard DriveOptical DriveOSMonitor
500 Gig - Samsung F3 Plextor DVD-R/RW Windows XP Pro (32Bit) POS 17" 
KeyboardPowerCaseMouse
$5 special at Target XFX 750Watt CM Scout Storm Logitech 
Mouse Pad
Steel Series 
  hide details  
Reply
post #15146 of 28466
I got my H50 about a week ago, last step on a complete computer overhaul, and im pretty happy with it.
Within a few hours of opening the box i was running at 4.2ghz stable, cores at 80-82ish constant full load. At 4.0ghz goes 65-70ish.
I did run it as a push pull exhaust from the beginning, but besides the stock fan, whatever else i have is salvaged parts i got from my work computer graveyard and some other stuff i had in a box, lack of funds.
I got a whole bunch of about 8 fans and tested to see which had the most output, to use on the radiator. A couple Evercools salvaged from Lenovos won the contest. Core temps dropped to about 75-78 full load.
Then i inverted the radiator setup, which seems to be a logical tubes up, to tubes down, and moved a spot cool from my ram to blow some more air directly on the radiator in/out at full speed. I didnt really believe that would make a difference, but i got another drop to about 74c. With 2 ghetto fans and a small noisy windmaker, how would it be with the good stuff
4.2ghz at 74-75 is good and proves that the H50 is a capable entry level LC solution, if its setup properly.
Above temps are core 0 temps, which is the hottest.
Im really drooling about the H50 mods ive been seeing around. Not only for the damn good looks, but it reflects the quality of the H50. No one mods crap

Programs i used to monitor and stress: Cpu-Z, True Temp (TJ Max 100), OCCT, Intel Burn Test, Prime 95, software bundled with board.

Ghetto rigged Old Thermaltake Armor case
i7950
Asus P6X58D-E
MSI Twin Frozr GTX460
6gb Patriot Sector 7
2x640GB 6Gb/s WD Caviar black raid 0
Many many huge, large, medium, small and tiny fans.
post #15147 of 28466
Quote:
Originally Posted by ghost_recon88 View Post
Does anyone know if I install an H50 in a SG05 case, and I have an optical drive installed, can I run a push/pull config?
http://www.overclock.net/9005712-post45.html
~Dark Giggidy~
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 D0 @ 4.00Ghz HT on Gigabyte GA-EX58-UD4P EVGA GTX480 SC 1536mb (3x2gb) Kingston CL7 @ 1600Mhz 
Hard DriveOptical DriveOSMonitor
500gb + 320gb Hitachi 7200.12 - 750gb WD7500AAKS LG 52x dual layer SATA Windows 7 Ultimate X64 BenQ G2420HD 2ms 
KeyboardPowerCaseMouse
Logitech Newtouch 200 CoolerMaster 850w modular CM690II Advanced SOON - CM Sentinel 
  hide details  
Reply
~Dark Giggidy~
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 D0 @ 4.00Ghz HT on Gigabyte GA-EX58-UD4P EVGA GTX480 SC 1536mb (3x2gb) Kingston CL7 @ 1600Mhz 
Hard DriveOptical DriveOSMonitor
500gb + 320gb Hitachi 7200.12 - 750gb WD7500AAKS LG 52x dual layer SATA Windows 7 Ultimate X64 BenQ G2420HD 2ms 
KeyboardPowerCaseMouse
Logitech Newtouch 200 CoolerMaster 850w modular CM690II Advanced SOON - CM Sentinel 
  hide details  
Reply
post #15148 of 28466
I just got my H70 i'm so stoked! Gonna install my whole new set up tonight and say farewell to the 775 socket era. I wish i had 35 rep so i can sell stuff here but might have to do it elsewhere.
post #15149 of 28466
I upgraded from 775 core 2 duo e7500 @ 3.6Ghz using a bsel mod since i was using intel mobo = no OC =( to 1155 i7 870 @ 4.2Ghz or even 4.4 if i like , you will love it i promise !!!! which cpu ?

Iv used quad core and C2D cpu's and compared to an i7 it sits way behind , you can feel the power with these new chips , goodbye lag.
Edited by Xristo - 12/7/10 at 4:11pm
    
CPUMotherboardGraphicsRAM
Intel i5 7600k @ 5Ghz, 1.312v Asus Prime Z270-AR msi GTX 1080 32GB Corsair Vengeance DDR4 3Ghz 
Hard DriveCoolingOSMonitor
Transcend SSD220S 120GB  Corsair H80i V2 Windows 10 Pro 64bit AOC AG322FCX 32" Curved LED 144hz 1920x1080 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Antec Quattro 1000w Thermaltake Versa N27 msi Gaming series 
Mouse PadAudio
Razer Goliathus Steelseries Siberia V2  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i5 7600k @ 5Ghz, 1.312v Asus Prime Z270-AR msi GTX 1080 32GB Corsair Vengeance DDR4 3Ghz 
Hard DriveCoolingOSMonitor
Transcend SSD220S 120GB  Corsair H80i V2 Windows 10 Pro 64bit AOC AG322FCX 32" Curved LED 144hz 1920x1080 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Antec Quattro 1000w Thermaltake Versa N27 msi Gaming series 
Mouse PadAudio
Razer Goliathus Steelseries Siberia V2  
  hide details  
Reply
post #15150 of 28466
Quote:
Originally Posted by 78@pwnt4lif3 View Post
I just got my H70 i'm so stoked! Gonna install my whole new set up tonight and say farewell to the 775 socket era. I wish i had 35 rep so i can sell stuff here but might have to do it elsewhere.
It's still worth a try selling your parts, if you get any buyers who are willing to trust you, then at least you don't have to worry about going into craigslist or ebay.

I got a used H50 for $40shipped a few days ago, so I shall be joining this club once my mobo comes back from RMA!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club