Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 1560

post #15591 of 28303
merry christmas watercoolers =D so what did santa bring youse all ?
    
CPUMotherboardGraphicsRAM
Intel i5 7600k @ 5Ghz, 1.312v Asus Prime Z270-AR msi GTX 1080 32GB Corsair Vengeance DDR4 3Ghz 
Hard DriveCoolingOSMonitor
Transcend SSD220S 120GB  Corsair H80i V2 Windows 10 Pro 64bit AOC AG322FCX 32" Curved LED 144hz 1920x1080 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Antec Quattro 1000w Thermaltake Versa N27 msi Gaming series 
Mouse PadAudio
Razer Goliathus Steelseries Siberia V2  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i5 7600k @ 5Ghz, 1.312v Asus Prime Z270-AR msi GTX 1080 32GB Corsair Vengeance DDR4 3Ghz 
Hard DriveCoolingOSMonitor
Transcend SSD220S 120GB  Corsair H80i V2 Windows 10 Pro 64bit AOC AG322FCX 32" Curved LED 144hz 1920x1080 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Antec Quattro 1000w Thermaltake Versa N27 msi Gaming series 
Mouse PadAudio
Razer Goliathus Steelseries Siberia V2  
  hide details  
Reply
post #15592 of 28303
Quote:
Originally Posted by kidaquarius View Post
There was some talk earlier about GPU temps negatively impacting the H50 and it's cooling capabilities..
Here's a stress test with OC Scanner and IBT running.
GTX570 900/1800/2020 @1.075v
i7 950 3.9GHz at 1.29v

MAX temperature Core Temp showing up was 79C/76C/77C/71C.

GPU hovered around 60-62C.

The H50 did it's job admirably given all components were stress tested at the same time.

Remember, I'm using two 120mm intake fans and one 120mm pull fan on the radiator.

Here's pic:
You really need a powerful push fan to drive those temps down abit more .. 79c is abit much .. I recomend buying some good thermal paste and a good push fan you will drop 5+ degrees easily . Youll get there mate , keep trying out different setups etc and one day u will find the sweet spot u were always looking for =D
    
CPUMotherboardGraphicsRAM
Intel i5 7600k @ 5Ghz, 1.312v Asus Prime Z270-AR msi GTX 1080 32GB Corsair Vengeance DDR4 3Ghz 
Hard DriveCoolingOSMonitor
Transcend SSD220S 120GB  Corsair H80i V2 Windows 10 Pro 64bit AOC AG322FCX 32" Curved LED 144hz 1920x1080 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Antec Quattro 1000w Thermaltake Versa N27 msi Gaming series 
Mouse PadAudio
Razer Goliathus Steelseries Siberia V2  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i5 7600k @ 5Ghz, 1.312v Asus Prime Z270-AR msi GTX 1080 32GB Corsair Vengeance DDR4 3Ghz 
Hard DriveCoolingOSMonitor
Transcend SSD220S 120GB  Corsair H80i V2 Windows 10 Pro 64bit AOC AG322FCX 32" Curved LED 144hz 1920x1080 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Antec Quattro 1000w Thermaltake Versa N27 msi Gaming series 
Mouse PadAudio
Razer Goliathus Steelseries Siberia V2  
  hide details  
Reply
post #15593 of 28303
Quote:
Originally Posted by alancsalt View Post
6 gauge 32 threads per inch and where to get them can depend what country yr in... Usually nut and bolt places, but in Oz they are used in power sockets (the ones with extender blocks have long ones)
I live in the U.S and I'm thinking I'm gonna pay Lowe's a visit.
The ARC
(16 items)
 
Mini DRAGON
(12 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Asus Maximus V Gene EVGA GTX 660s SuperClocked SLI ADATA Gaming Series 8GB DDR3 1600 
Hard DriveCoolingOSMonitor
Intel X25-V Raid 0/Samsung F3 1TB/Velociraptor ... Cooler Master V6 GT Windows 7 Home Premium x64 Dell U2913WM 
PowerCaseAudioOther
Corsair HX850 Fractal Design Arc Mini Tianyun Zero DAC/Amp '09 (OPA627) & ATH-AD700 Lamptron Fan Controller FC6 
CPUMotherboardGraphicsRAM
Intel Core i5 4690K MSI Z87i Gaming AC MSI GTX 980 Gaming 4G Avexir Blitz 1.1 Series Gaming Dragon 8GB DDR3 ... 
Hard DriveCoolingOSMonitor
Crucial MX200 500GB / Seagate SSHD 1TB  Deepcool Gamer Storm Captain 240 Windows 7 Professional x64 Dell U3415W 
PowerCaseAudioOther
SeaSonic M12II 620 Corsair 250D Sony MDR-1RBT Aerocool CoolTouch-E Black Edition 
  hide details  
Reply
The ARC
(16 items)
 
Mini DRAGON
(12 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Asus Maximus V Gene EVGA GTX 660s SuperClocked SLI ADATA Gaming Series 8GB DDR3 1600 
Hard DriveCoolingOSMonitor
Intel X25-V Raid 0/Samsung F3 1TB/Velociraptor ... Cooler Master V6 GT Windows 7 Home Premium x64 Dell U2913WM 
PowerCaseAudioOther
Corsair HX850 Fractal Design Arc Mini Tianyun Zero DAC/Amp '09 (OPA627) & ATH-AD700 Lamptron Fan Controller FC6 
CPUMotherboardGraphicsRAM
Intel Core i5 4690K MSI Z87i Gaming AC MSI GTX 980 Gaming 4G Avexir Blitz 1.1 Series Gaming Dragon 8GB DDR3 ... 
Hard DriveCoolingOSMonitor
Crucial MX200 500GB / Seagate SSHD 1TB  Deepcool Gamer Storm Captain 240 Windows 7 Professional x64 Dell U3415W 
PowerCaseAudioOther
SeaSonic M12II 620 Corsair 250D Sony MDR-1RBT Aerocool CoolTouch-E Black Edition 
  hide details  
Reply
post #15594 of 28303
Quote:
Originally Posted by Xristo View Post
You really need a powerful push fan to drive those temps down abit more .. 79c is abit much .. I recomend buying some good thermal paste and a good push fan you will drop 5+ degrees easily . Youll get there mate , keep trying out different setups etc and one day u will find the sweet spot u were always looking for =D
I'm going to space the pull fan from the radiator first with some sort of shroud.
Just need some longer screws.
Then I will experiment with a push fan.

As far as thermal paste goes, well, I'm using what came on the H50.
I will experiment with some AS5 as well.

[tapatalk on android]
Black Box
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 950 4.07GHz @1.32v ASUS Sabertooth x58 EVGA GTX570 850/1700/2100 @1.063v 6GB Corsair Dominator 8-8-8-24 1754MHz 
Hard DriveOptical DriveOSMonitor
120GB OCZ Agility2 & WD 640GB Caviar Black Sony DVD-RW Windows 7 Ultimate x64 23" Samsung xl2370 LED 
KeyboardPowerCaseMouse
Slimline Kensington Corsair HX650W Cooler Master Elite 335 w/ custom window Logitech G5 
Mouse Pad
NOVA Gaming Winner 3 
  hide details  
Reply
Black Box
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 950 4.07GHz @1.32v ASUS Sabertooth x58 EVGA GTX570 850/1700/2100 @1.063v 6GB Corsair Dominator 8-8-8-24 1754MHz 
Hard DriveOptical DriveOSMonitor
120GB OCZ Agility2 & WD 640GB Caviar Black Sony DVD-RW Windows 7 Ultimate x64 23" Samsung xl2370 LED 
KeyboardPowerCaseMouse
Slimline Kensington Corsair HX650W Cooler Master Elite 335 w/ custom window Logitech G5 
Mouse Pad
NOVA Gaming Winner 3 
  hide details  
Reply
post #15595 of 28303
I'm in. Mine is in the Mail. I will post some pics up as soon as I get it installed!
Gideon
(10 items)
 
For Sale: Astro A40 Headset + Astro Mixamp Pro
$179.99 (USD)
CPUMotherboardGraphicsRAM
Intel i7 6700K Asus Z170i Pro Gaming GTX 1080 Corsair Vengeance LED 32GB 3200 Mhz 
Hard DriveCoolingOSPower
Samsung 950 PRO 256GB NZXT Kraken X61 Windows 10 EVGA P2 SuperNOVA 850w 
CaseAudio
NZXT Manta Astro A40 TR + Astro Mixamp TR 
  hide details  
Reply
Gideon
(10 items)
 
For Sale: Astro A40 Headset + Astro Mixamp Pro
$179.99 (USD)
CPUMotherboardGraphicsRAM
Intel i7 6700K Asus Z170i Pro Gaming GTX 1080 Corsair Vengeance LED 32GB 3200 Mhz 
Hard DriveCoolingOSPower
Samsung 950 PRO 256GB NZXT Kraken X61 Windows 10 EVGA P2 SuperNOVA 850w 
CaseAudio
NZXT Manta Astro A40 TR + Astro Mixamp TR 
  hide details  
Reply
post #15596 of 28303
Quote:
Originally Posted by kidaquarius View Post
I'm going to space the pull fan from the radiator first with some sort of shroud.
Just need some longer screws.
Then I will experiment with a push fan.

As far as thermal paste goes, well, I'm using what came on the H50.
I will experiment with some AS5 as well.

[tapatalk on android]
Dunno if you do ghetto, but an old 120mm fan with centre cut out does ok as shroud, and if screws are hard to source, older mobo standoffs use the same thread. Just stack them, and drill out the mount holes in the shroud to clear the OD of the standoffs.....get the height right mixing standoff heights and screw the originals into the top of the stack.. Rough?

Also to help cooling, a 120mm fan can be put into 3 of the 5.25 drive bays - can be mounted on back edge of a gutted shortened shell of a cd drive, and used as inlet or exhaust depending which way you went with the H50.

Just for those with limited resources...
Nyarlathotep
(17 items)
 
Cxaxukluth
(19 items)
 
Yog-Sothoth
(10 items)
 
CPUMotherboardGraphicsRAM
Intel Core i7 3970X ASUS X79 ROG Rampage IV Extreme Bios 2105 EVGA KingPin Classified 780 Ti 3GB Tri-SLI  G.Skill Trident X F3-2400C10Q-16GTX 16GB (... 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 4 SSD Seagate Barracuda 1TB ST31000524AS Lite-On IHAS124 24X DVDRW 3 x XSPC Rasa 750 RX360 Universal CPU Water Coo... 
CoolingOSMonitorPower
3 x EK-FC780 GTX Classy - Nickel Windows 7 Professional x64 3 x Dell U2412M SilverStone 1500W V2.2 x 2 
Case
Lian Li Pitstop T60 Testbench 
CPUMotherboardGraphicsRAM
i7 - 5960X Asus Rampage Extreme V Gigabyte Titan X 12GB G.SKILL Ripjaws 4 series 16GB (4 x 4GB) 288-Pin... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 850 Pro Series 1TB SSD 3 x Seagate 2TB  Seagate 3TB LG 
CoolingCoolingOSMonitor
Phobya Xtreme 1260 Radiator XSPC D5 Photon 170 Reservoir/Pump Combo Microsoft Windows 7 Professional 64bit with SP1  Samsung S34E790C 34in Ultrawide Curved LED Mo... 
KeyboardPowerCaseMouse
Microsoft Wireless 3000 Silverstone ST1500 Antec Eleven Hundred Microsoft Wireless 3000 
AudioAudioAudio
Audioengine D1 Premium 24-Bit DAC Audioengine 5+ Premium Powered Speakers Black Audioengine S8 Black 
CPUMotherboardGraphicsRAM
i7 3960X Asus Rampage IV Extreme Gainward "GOOD" GTX 580 x 2 AData x 2 
Hard DriveCoolingCoolingOS
Seagate XSPC Rasa EX 360 crossflow kit x 2, XSPC Rasa E... EK GW-580 Waterblocks Win 7 Pro 
PowerCase
SilverStone Strider ST1500 InWin D Frame 
  hide details  
Reply
Nyarlathotep
(17 items)
 
Cxaxukluth
(19 items)
 
Yog-Sothoth
(10 items)
 
CPUMotherboardGraphicsRAM
Intel Core i7 3970X ASUS X79 ROG Rampage IV Extreme Bios 2105 EVGA KingPin Classified 780 Ti 3GB Tri-SLI  G.Skill Trident X F3-2400C10Q-16GTX 16GB (... 
Hard DriveHard DriveOptical DriveCooling
OCZ Vertex 4 SSD Seagate Barracuda 1TB ST31000524AS Lite-On IHAS124 24X DVDRW 3 x XSPC Rasa 750 RX360 Universal CPU Water Coo... 
CoolingOSMonitorPower
3 x EK-FC780 GTX Classy - Nickel Windows 7 Professional x64 3 x Dell U2412M SilverStone 1500W V2.2 x 2 
Case
Lian Li Pitstop T60 Testbench 
CPUMotherboardGraphicsRAM
i7 - 5960X Asus Rampage Extreme V Gigabyte Titan X 12GB G.SKILL Ripjaws 4 series 16GB (4 x 4GB) 288-Pin... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 850 Pro Series 1TB SSD 3 x Seagate 2TB  Seagate 3TB LG 
CoolingCoolingOSMonitor
Phobya Xtreme 1260 Radiator XSPC D5 Photon 170 Reservoir/Pump Combo Microsoft Windows 7 Professional 64bit with SP1  Samsung S34E790C 34in Ultrawide Curved LED Mo... 
KeyboardPowerCaseMouse
Microsoft Wireless 3000 Silverstone ST1500 Antec Eleven Hundred Microsoft Wireless 3000 
AudioAudioAudio
Audioengine D1 Premium 24-Bit DAC Audioengine 5+ Premium Powered Speakers Black Audioengine S8 Black 
CPUMotherboardGraphicsRAM
i7 3960X Asus Rampage IV Extreme Gainward "GOOD" GTX 580 x 2 AData x 2 
Hard DriveCoolingCoolingOS
Seagate XSPC Rasa EX 360 crossflow kit x 2, XSPC Rasa E... EK GW-580 Waterblocks Win 7 Pro 
PowerCase
SilverStone Strider ST1500 InWin D Frame 
  hide details  
Reply
post #15597 of 28303
There's a more effective way to mount the fans to the radiator and mount a shroud to a fan. Rather than use a long 6/32 screw to sandwich them all together, which actually only serves to bend the lip on the outer fan as this is where all the force is applied and will eventually come loose. Get some 6/32 x 3/8 at lowes ( I verified that this length will clear the rad fins) and a small #2 phillips screwdriver, Lowes has those too. First slip a screw into the bottom hole on all four corners of the fan, line the fan up on the radiator, then slip the small phillips through the top hole in the fan corners and tighten on to the radiator. This method gives a much more secure mount. To mount a shroud to the fan take four regular fan screws and start one in each bottom corner of the shroud again by slipping the small phillips through the top hole, line the shroud up on the fan slip the phillips through the top holes again and tighten the shroud to the fan, again a much more secure mount than the long 6/32 sandwich. The next and final trick is with a push/pull setup and rear existing 120mm fan hole mount just mount the hole radiator assembly with fan screws to the case the same way you'd mount just a fan, again elimating the unstable long 6/32 sandwich.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 3930K Asus Sabertooth X79 NVIDIA GeForce GTS 450 Samsung  
Hard DriveOptical DriveOSMonitor
Intel 520 120gb SSD LG 24x Win XP Pro 64 / Win 7 Pro 64 Dell U2412M 
PowerCaseMouseMouse Pad
Corsair AX650 Lian LI PC9F Logitech G500 Razer Goliathus 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 3930K Asus Sabertooth X79 NVIDIA GeForce GTS 450 Samsung  
Hard DriveOptical DriveOSMonitor
Intel 520 120gb SSD LG 24x Win XP Pro 64 / Win 7 Pro 64 Dell U2412M 
PowerCaseMouseMouse Pad
Corsair AX650 Lian LI PC9F Logitech G500 Razer Goliathus 
  hide details  
Reply
post #15598 of 28303
This is how I mount my 2 fans and shroud to my H50. Its works great and they are nice and tight.

Zip Tie Fan
Turbo Toilet
(9 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @4.5Ghz ASRock Z68 Extreme3 Gen3 Sapphire HD7950 Boost @ 1125/1400 G.Skill Ripjaws X (8gb x 2) 
Hard DriveCoolingOSMonitor
Crucial MX100 240GB SSD Hyper 212 Evo Windows 7 Ultimate Samsung S24C650 1920x1200 
Case
Antec 300 
  hide details  
Reply
Turbo Toilet
(9 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @4.5Ghz ASRock Z68 Extreme3 Gen3 Sapphire HD7950 Boost @ 1125/1400 G.Skill Ripjaws X (8gb x 2) 
Hard DriveCoolingOSMonitor
Crucial MX100 240GB SSD Hyper 212 Evo Windows 7 Ultimate Samsung S24C650 1920x1200 
Case
Antec 300 
  hide details  
Reply
post #15599 of 28303
Maybe if you provide pics because that's a air cooler and as for mothman please please show us pictures cuz it can help more..
post #15600 of 28303
Quote:
Originally Posted by 78@pwnt4lif3 View Post
Maybe if you provide pics because that's a air cooler and as for mothman please please show us pictures cuz it can help more..
Its the same principle only you thread the zip ties through the holes that the screws would normally go into. I actually drilled out the screw holes bigger to allow for a bigger/longer zip tie to fit all the way through my fans shroud and rad.

This is about the best pic I have at the moment



Uploaded with ImageShack.us
Turbo Toilet
(9 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @4.5Ghz ASRock Z68 Extreme3 Gen3 Sapphire HD7950 Boost @ 1125/1400 G.Skill Ripjaws X (8gb x 2) 
Hard DriveCoolingOSMonitor
Crucial MX100 240GB SSD Hyper 212 Evo Windows 7 Ultimate Samsung S24C650 1920x1200 
Case
Antec 300 
  hide details  
Reply
Turbo Toilet
(9 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @4.5Ghz ASRock Z68 Extreme3 Gen3 Sapphire HD7950 Boost @ 1125/1400 G.Skill Ripjaws X (8gb x 2) 
Hard DriveCoolingOSMonitor
Crucial MX100 240GB SSD Hyper 212 Evo Windows 7 Ultimate Samsung S24C650 1920x1200 
Case
Antec 300 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club