Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 1570

post #15691 of 28404
Quote:
Originally Posted by 78@pwnt4lif3;11814315 
That is a weird ass case.

It looks as though the pictures are upside down. Hard to tell though without at least a full side picture. His sig rig only lists a laptop.
Main
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 Black Edition MSI NF750-G55 AM3 NVIDIA nForce 750a SLI EVGA 01G-P3-1158-TR GeForce GTS 250 1GB x 2 G.SKILL Ripjaws Series 8GB-1600 DDR3 
Hard DriveOptical DriveOSMonitor
Western Digital VelociRaptor WD6000HLHX 600GB Lite-On IHAS524 A Windows 7 Ultimate 64 bit Samsung 46" 1080p 240Hz LED-LCD HDTV UN46C7000 
KeyboardPowerCaseMouse
Logitech G15 Thermaltake W0319RU 850W Modular IN-WIN FANQUA Logitech G5 
  hide details  
Reply
Main
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 Black Edition MSI NF750-G55 AM3 NVIDIA nForce 750a SLI EVGA 01G-P3-1158-TR GeForce GTS 250 1GB x 2 G.SKILL Ripjaws Series 8GB-1600 DDR3 
Hard DriveOptical DriveOSMonitor
Western Digital VelociRaptor WD6000HLHX 600GB Lite-On IHAS524 A Windows 7 Ultimate 64 bit Samsung 46" 1080p 240Hz LED-LCD HDTV UN46C7000 
KeyboardPowerCaseMouse
Logitech G15 Thermaltake W0319RU 850W Modular IN-WIN FANQUA Logitech G5 
  hide details  
Reply
post #15692 of 28404
Question, and I figured I'd ask here since you guys should know, is it better to mount the H50 on one of the Top fan ports (improper word I think but meh) on my 922 in it's intake form or put it on the exhaust fan port with it exhausting. A push pull would be an option, I would just much rather have the air going over the rad if it's on the exhaust fan port to be...well exhausting the hot air rather then putting more into it.

Thanks guys

Edit: Oh and it's a AMD Phenom II 955 BE, sig rig is a bit outdated. And I'm running the poor stock HSF...yeah I know I'm going to catch hell for that.
post #15693 of 28404
juz a quick question..

I manage to get a 38mm fan shroud for my noctua p12.

May i know what is the length and type of screw I am suppose to ask for at the hardware shop? I'm heading down in 10 hours time but lazy to remove my fans and shroud to bring there for a measurement
Stargate SG10
(14 items)
 
  
Reply
Stargate SG10
(14 items)
 
  
Reply
post #15694 of 28404
38mm + 25mm = 63mm (thickness of fans)
63mm + 2mm = 65mm (thickness of fans plus 2mm to go into the rad)

Approximately 65mm, or 2.56 inches should be fine. If they don't have that get something a bit longer and use washers so the screw doesn't puncture the rad.
Current Machine
(10 items)
 
  
CPUMotherboardGraphicsRAM
INTEL I5 4690K ASUS Z97-AR XFX R9_290X PATRIOT Viper 2133 MHz 8GB 
Hard DriveHard DriveCoolingOS
Seagate 1TB SSHD PLEXTOR 256GB PCIE M.2 SSD LIQUID Windows 7 
PowerCase
CORSAIR AX 760 CORSAIR AIR 540 
  hide details  
Reply
Current Machine
(10 items)
 
  
CPUMotherboardGraphicsRAM
INTEL I5 4690K ASUS Z97-AR XFX R9_290X PATRIOT Viper 2133 MHz 8GB 
Hard DriveHard DriveCoolingOS
Seagate 1TB SSHD PLEXTOR 256GB PCIE M.2 SSD LIQUID Windows 7 
PowerCase
CORSAIR AX 760 CORSAIR AIR 540 
  hide details  
Reply
post #15695 of 28404
Quote:
Originally Posted by 78@pwnt4lif3 View Post
That is a weird ass case.
Quote:
Originally Posted by Carfanatic View Post
It looks as though the pictures are upside down. Hard to tell though without at least a full side picture. His sig rig only lists a laptop.
lian li v-1000 case
Green Lantern
(18 items)
 
 
The Router 3.0
(14 items)
 
CPUMotherboardGraphicsGraphics
Intel i7 920 3.8GHz 1.25v HT Asus P6T XFX 5870 XFX 5780 
RAMHard DriveHard DriveOptical Drive
Kingston HyperX Intel X25-M 80GB G2 10Tb iSCSI Lite-On 1635S 
CoolingOSMonitorKeyboard
Corsair H50 Windows 7 x64 Ultimate Asus PA246 Logitech G15 v1 
PowerCaseMouseAudio
Corsair 1000HX Lian Li v1000+ Logitech G5 v1 Creative Audigy 2 ZS 
Other
Intel Pro/1000 PT Server Adapter 
CPUCPUMotherboardGraphics
Intel Xeon L5335 Intel Xeon L5335 Intel 5000P ATI ES1000 
RAMHard DriveOSPower
Elpida ECC WD20NPVT SmartOS HP 350W + Hot Spare 
Case
HP Proliant 380 G5 
CPUMotherboardRAMHard Drive
AMD Athlon 64 X2 3800+ nForce 3 250 2 GB 512MB CF To IDE 
OSCaseOtherOther
pfSense 2.0.1 x64 Shuttle XPC Intel PWLA8492MT PRO/1000 MT Dual Port Server A... Verizon FiOS 75/35Mbit 
  hide details  
Reply
Green Lantern
(18 items)
 
 
The Router 3.0
(14 items)
 
CPUMotherboardGraphicsGraphics
Intel i7 920 3.8GHz 1.25v HT Asus P6T XFX 5870 XFX 5780 
RAMHard DriveHard DriveOptical Drive
Kingston HyperX Intel X25-M 80GB G2 10Tb iSCSI Lite-On 1635S 
CoolingOSMonitorKeyboard
Corsair H50 Windows 7 x64 Ultimate Asus PA246 Logitech G15 v1 
PowerCaseMouseAudio
Corsair 1000HX Lian Li v1000+ Logitech G5 v1 Creative Audigy 2 ZS 
Other
Intel Pro/1000 PT Server Adapter 
CPUCPUMotherboardGraphics
Intel Xeon L5335 Intel Xeon L5335 Intel 5000P ATI ES1000 
RAMHard DriveOSPower
Elpida ECC WD20NPVT SmartOS HP 350W + Hot Spare 
Case
HP Proliant 380 G5 
CPUMotherboardRAMHard Drive
AMD Athlon 64 X2 3800+ nForce 3 250 2 GB 512MB CF To IDE 
OSCaseOtherOther
pfSense 2.0.1 x64 Shuttle XPC Intel PWLA8492MT PRO/1000 MT Dual Port Server A... Verizon FiOS 75/35Mbit 
  hide details  
Reply
post #15696 of 28404
I take it back guys. My temps are still not very good. I forgot to take into account that the AC had been turned on last night. Though somewhat better than before, it isn't anything significant. Still idling at 50c and loading at 80c within a few seconds of Prime, literally.

I still don't get a "suction" effect when I take the retention ring off. The pump just starts moving immediately as the ring loosens up. Is this normal, or am I just not getting good contact? Because holding both surfaces together with a bit of TIM, when not installed on the mobo, makes the CPU stick to the base. And it takes a lot of effort to twist and pull the two apart.

Would it help to use the LGA775 mounting holes instead? I still have my old TRUE metal back plate.

I'd appreciate if someone could post close up pics of their H50 installed on an LGA1366 socket. Preferably showing the four push pins on the side. Thanks again guys.
Cheezburgerz
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 @ 4.0ghz (200x20) HT On, 1.2825 Asus Rampage III Extreme (Bios 1005) Radeon HD6990 12GB Corsair Dominator GT 1600mhz CAS7 
Hard DriveOptical DriveOSMonitor
2TB of 7200.11 Seagates + 1x WD5000AAKS 500gb Lite-On DVD-RW SATA Windows 7 Ultimate x64 Samsung T260HD 26" 1920x1200 
KeyboardPowerCaseMouse
Logitech G15 v2 Corsair 620HX Silverstone Raven RV01B-W Logitech G500 
Mouse Pad
Steelseries QcK 
  hide details  
Reply
Cheezburgerz
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 @ 4.0ghz (200x20) HT On, 1.2825 Asus Rampage III Extreme (Bios 1005) Radeon HD6990 12GB Corsair Dominator GT 1600mhz CAS7 
Hard DriveOptical DriveOSMonitor
2TB of 7200.11 Seagates + 1x WD5000AAKS 500gb Lite-On DVD-RW SATA Windows 7 Ultimate x64 Samsung T260HD 26" 1920x1200 
KeyboardPowerCaseMouse
Logitech G15 v2 Corsair 620HX Silverstone Raven RV01B-W Logitech G500 
Mouse Pad
Steelseries QcK 
  hide details  
Reply
post #15697 of 28404
hey guys i've finally installed the h70 into my system .. i have one question regarding the 3 pin connector that is coming from the heatsink. i assume that it is suppose to go to the location of "cpu fan" on the motherboard, but i actually have it rerouted to the back to a 3 pin to 4 pin power supply type connector. is this okay?

i get a cpu fan error due to this on my crosshair iv formula but temps seem fine.
New Setup
(0 items)
  
Reply
New Setup
(0 items)
  
Reply
post #15698 of 28404
How do I add another fan to the H50? Duct tape, glue? sheet-rock-screws?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-2500k @ 4.2ghz Asus P8P67 Deluxe / Bigfoot 2100 Dual eVGA GTX 460 8 GB's of Corsair Vengeance 1600mhz 
Hard DriveOptical DriveOSMonitor
150 GB's WD Raptor 700 GB's WD Cavilier Windows 7 64 bit Corporate 24 inch Wide Samsung 2ms 120 mhz 3D LCD 
KeyboardPowerCaseMouse
G15 850 watt Corsair Ultra Aluminus Case G5 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5-2500k @ 4.2ghz Asus P8P67 Deluxe / Bigfoot 2100 Dual eVGA GTX 460 8 GB's of Corsair Vengeance 1600mhz 
Hard DriveOptical DriveOSMonitor
150 GB's WD Raptor 700 GB's WD Cavilier Windows 7 64 bit Corporate 24 inch Wide Samsung 2ms 120 mhz 3D LCD 
KeyboardPowerCaseMouse
G15 850 watt Corsair Ultra Aluminus Case G5 
  hide details  
Reply
post #15699 of 28404
Quote:
Originally Posted by jasyn View Post
hey guys i've finally installed the h70 into my system .. i have one question regarding the 3 pin connector that is coming from the heatsink. i assume that it is suppose to go to the location of "cpu fan" on the motherboard, but i actually have it rerouted to the back to a 3 pin to 4 pin power supply type connector. is this okay?

i get a cpu fan error due to this on my crosshair iv formula but temps seem fine.
yes, the pump motor is supposed to be running at full 12v. it's prefered to hook it up your way. you can hook up the radiator fan on the "cpu fan" header on your mobo, or set your bios to ignore the fan speeds to prevent the fan error message
Green Lantern
(18 items)
 
 
The Router 3.0
(14 items)
 
CPUMotherboardGraphicsGraphics
Intel i7 920 3.8GHz 1.25v HT Asus P6T XFX 5870 XFX 5780 
RAMHard DriveHard DriveOptical Drive
Kingston HyperX Intel X25-M 80GB G2 10Tb iSCSI Lite-On 1635S 
CoolingOSMonitorKeyboard
Corsair H50 Windows 7 x64 Ultimate Asus PA246 Logitech G15 v1 
PowerCaseMouseAudio
Corsair 1000HX Lian Li v1000+ Logitech G5 v1 Creative Audigy 2 ZS 
Other
Intel Pro/1000 PT Server Adapter 
CPUCPUMotherboardGraphics
Intel Xeon L5335 Intel Xeon L5335 Intel 5000P ATI ES1000 
RAMHard DriveOSPower
Elpida ECC WD20NPVT SmartOS HP 350W + Hot Spare 
Case
HP Proliant 380 G5 
CPUMotherboardRAMHard Drive
AMD Athlon 64 X2 3800+ nForce 3 250 2 GB 512MB CF To IDE 
OSCaseOtherOther
pfSense 2.0.1 x64 Shuttle XPC Intel PWLA8492MT PRO/1000 MT Dual Port Server A... Verizon FiOS 75/35Mbit 
  hide details  
Reply
Green Lantern
(18 items)
 
 
The Router 3.0
(14 items)
 
CPUMotherboardGraphicsGraphics
Intel i7 920 3.8GHz 1.25v HT Asus P6T XFX 5870 XFX 5780 
RAMHard DriveHard DriveOptical Drive
Kingston HyperX Intel X25-M 80GB G2 10Tb iSCSI Lite-On 1635S 
CoolingOSMonitorKeyboard
Corsair H50 Windows 7 x64 Ultimate Asus PA246 Logitech G15 v1 
PowerCaseMouseAudio
Corsair 1000HX Lian Li v1000+ Logitech G5 v1 Creative Audigy 2 ZS 
Other
Intel Pro/1000 PT Server Adapter 
CPUCPUMotherboardGraphics
Intel Xeon L5335 Intel Xeon L5335 Intel 5000P ATI ES1000 
RAMHard DriveOSPower
Elpida ECC WD20NPVT SmartOS HP 350W + Hot Spare 
Case
HP Proliant 380 G5 
CPUMotherboardRAMHard Drive
AMD Athlon 64 X2 3800+ nForce 3 250 2 GB 512MB CF To IDE 
OSCaseOtherOther
pfSense 2.0.1 x64 Shuttle XPC Intel PWLA8492MT PRO/1000 MT Dual Port Server A... Verizon FiOS 75/35Mbit 
  hide details  
Reply
post #15700 of 28404
Quote:
Originally Posted by Dream Killer View Post
yes, the pump motor is supposed to be running at full 12v. it's prefered to hook it up your way. you can hook up the radiator fan on the "cpu fan" header on your mobo, or set your bios to ignore the fan speeds to prevent the fan error message
thank you very much
New Setup
(0 items)
  
Reply
New Setup
(0 items)
  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club