Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 1746

post #17451 of 28252
Quote:
Originally Posted by DJ4g63t View Post
I decided to try running my H50 as a rear intake a month or two ago and decided that today I wanted to mount my new Yate loon high speed fans on it as rear exhaust. Much to my surprise this is what I found after running it as an intake for a month or two




While my temps did go down using it as an intake at first. I did notice my core temps over the last week or so of gaming were a few degrees higher than they usually were with the fans as an intake. I can't imagine why Lets just say I won't be using the H50 as an intake ever again. Not only did it make my H50 filthy and lose the performance benefit of intake it also increased my gpu temps buy roughly 5C while gaming.
Considering how clean the rest of the parts in the picture look, it seems your H70 was acting as a dust filter for the rest of your system.

Is that really dust (it looks so white and fluffy)? It almost looks like it could be fibers from cloth or something. Is it located in a residence? Is there any industrial work going on in the area? I live in a fairly dusty house, but even so it would take a couple of years to build up that much dust in a computer.
Nukeyork
(24 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 4770k ASUS Sabertooth Z87 MSI Radeon RX480 Gaming X 8GB MSI Radeon RX480 Gaming X 8GB 
RAMHard DriveHard DriveHard Drive
16G Kingston 1600MHz Corsair Force Series SSD 180GB Crucial MX300 SSD 525GB Western Digital WD10EALS 1TB 
Optical DriveCoolingOSMonitor
ASUS BW-12B1ST Blu-ray RW Thermaltake Water 3.0 Ultimate Windows 10 64 pro LG 34UM65-P 
KeyboardPowerCaseMouse
Hcman Zhuque Teamwolf Mechanical Corsair AX750 Corsair 760T Steel Series Sensei Wireless Gaming Mouse 
Mouse PadAudioOtherOther
Steel Series 4HD Pro On Board Thermaltake X 5G Superspeed USB 3.0 Hard Drive ... Logitech Driving Force GT Steering Wheel 
OtherOtherOtherOther
Thrustmaster T.Flight Hotas X Joystick NZXT Hue LED Controller Razer Orbweaver Chroma RGB Mechanical Gaming Co... Ergotron LX Desk Mount LCD Arm 
  hide details  
Reply
Nukeyork
(24 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 4770k ASUS Sabertooth Z87 MSI Radeon RX480 Gaming X 8GB MSI Radeon RX480 Gaming X 8GB 
RAMHard DriveHard DriveHard Drive
16G Kingston 1600MHz Corsair Force Series SSD 180GB Crucial MX300 SSD 525GB Western Digital WD10EALS 1TB 
Optical DriveCoolingOSMonitor
ASUS BW-12B1ST Blu-ray RW Thermaltake Water 3.0 Ultimate Windows 10 64 pro LG 34UM65-P 
KeyboardPowerCaseMouse
Hcman Zhuque Teamwolf Mechanical Corsair AX750 Corsair 760T Steel Series Sensei Wireless Gaming Mouse 
Mouse PadAudioOtherOther
Steel Series 4HD Pro On Board Thermaltake X 5G Superspeed USB 3.0 Hard Drive ... Logitech Driving Force GT Steering Wheel 
OtherOtherOtherOther
Thrustmaster T.Flight Hotas X Joystick NZXT Hue LED Controller Razer Orbweaver Chroma RGB Mechanical Gaming Co... Ergotron LX Desk Mount LCD Arm 
  hide details  
Reply
post #17452 of 28252
Quote:
Originally Posted by Mergatroid View Post
Considering how clean the rest of the parts in the picture look, it seems your H70 was acting as a dust filter for the rest of your system.

Is that really dust (it looks so white and fluffy)? It almost looks like it could be fibers from cloth or something. Is it located in a residence? Is there any industrial work going on in the area? I live in a fairly dusty house, but even so it would take a couple of years to build up that much dust in a computer.
This is located in my computer room in my house. Its not a dusty or dirty house what so ever. It sits under my computer desk up off the floor. I was amazed when I saw it cause the filter on my 2 120 intake fans in the front of my case never build up like that. I have no clue why its so bad but your right it was kinda fluffy.
Turbo Toilet
(9 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @4.5Ghz ASRock Z68 Extreme3 Gen3 Sapphire HD7950 Boost @ 1125/1400 G.Skill Ripjaws X (8gb x 2) 
Hard DriveCoolingOSMonitor
Crucial MX100 240GB SSD Hyper 212 Evo Windows 7 Ultimate Samsung S24C650 1920x1200 
Case
Antec 300 
  hide details  
Reply
Turbo Toilet
(9 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @4.5Ghz ASRock Z68 Extreme3 Gen3 Sapphire HD7950 Boost @ 1125/1400 G.Skill Ripjaws X (8gb x 2) 
Hard DriveCoolingOSMonitor
Crucial MX100 240GB SSD Hyper 212 Evo Windows 7 Ultimate Samsung S24C650 1920x1200 
Case
Antec 300 
  hide details  
Reply
post #17453 of 28252
It looks like a rabbit jumped into the fan and went POOF!
MOAR FANS
(10 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77 UD5H HD 7950 G skill Ripjaws X 
CoolingOSKeyboardPower
EK supreme HF Win 7 Logitech G15 Thermaltake TR2 850W 
CaseMouse
switch 810 Logitech MX620 
  hide details  
Reply
MOAR FANS
(10 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77 UD5H HD 7950 G skill Ripjaws X 
CoolingOSKeyboardPower
EK supreme HF Win 7 Logitech G15 Thermaltake TR2 850W 
CaseMouse
switch 810 Logitech MX620 
  hide details  
Reply
post #17454 of 28252
Quote:
Originally Posted by DJ4g63t View Post
I decided to try running my H50 as a rear intake a month or two ago and decided that today I wanted to mount my new Yate loon high speed fans on it as rear exhaust. Much to my surprise this is what I found after running it as an intake for a month or two




While my temps did go down using it as an intake at first. I did notice my core temps over the last week or so of gaming were a few degrees higher than they usually were with the fans as an intake. I can't imagine why Lets just say I won't be using the H50 as an intake ever again. Not only did it make my H50 filthy and lose the performance benefit of intake it also increased my gpu temps buy roughly 5C while gaming.
You can always buy a $2 filter for that. That is what I've been using and when I vacuum my room, I simply vacuum the dust that is collected on the filter.
Goliath
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel I7-980x GigaByte GA-X58A-UD3R MSI GTX 1070 Quicksilver  Corsair Dominator 12GB 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro (256GB) - 2x Samsung F3 (1TB) LG BH10LS30K Corsair H100i Windows 10 Home (64bit) 
MonitorPowerCase
Samsung BX2235 Corsair HX1000i Corsair 800D 
  hide details  
Reply
Goliath
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel I7-980x GigaByte GA-X58A-UD3R MSI GTX 1070 Quicksilver  Corsair Dominator 12GB 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro (256GB) - 2x Samsung F3 (1TB) LG BH10LS30K Corsair H100i Windows 10 Home (64bit) 
MonitorPowerCase
Samsung BX2235 Corsair HX1000i Corsair 800D 
  hide details  
Reply
post #17455 of 28252
condenced into one post
Edited by CircuitFreak - 4/25/11 at 5:00pm
MOAR FANS
(10 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77 UD5H HD 7950 G skill Ripjaws X 
CoolingOSKeyboardPower
EK supreme HF Win 7 Logitech G15 Thermaltake TR2 850W 
CaseMouse
switch 810 Logitech MX620 
  hide details  
Reply
MOAR FANS
(10 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77 UD5H HD 7950 G skill Ripjaws X 
CoolingOSKeyboardPower
EK supreme HF Win 7 Logitech G15 Thermaltake TR2 850W 
CaseMouse
switch 810 Logitech MX620 
  hide details  
Reply
post #17456 of 28252
Quote:
Originally Posted by InvalidUserID View Post
You can always buy a $2 filter for that. That is what I've been using and when I vacuum my room, I simply vacuum the dust that is collected on the filter.
Yeah but even with a filter that dirty it will hurt performance badly and I'd have to pull my computer out a few times a week just to vacuum it so its not really worth it to me.
Turbo Toilet
(9 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @4.5Ghz ASRock Z68 Extreme3 Gen3 Sapphire HD7950 Boost @ 1125/1400 G.Skill Ripjaws X (8gb x 2) 
Hard DriveCoolingOSMonitor
Crucial MX100 240GB SSD Hyper 212 Evo Windows 7 Ultimate Samsung S24C650 1920x1200 
Case
Antec 300 
  hide details  
Reply
Turbo Toilet
(9 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @4.5Ghz ASRock Z68 Extreme3 Gen3 Sapphire HD7950 Boost @ 1125/1400 G.Skill Ripjaws X (8gb x 2) 
Hard DriveCoolingOSMonitor
Crucial MX100 240GB SSD Hyper 212 Evo Windows 7 Ultimate Samsung S24C650 1920x1200 
Case
Antec 300 
  hide details  
Reply
post #17457 of 28252
That dust looks like what I get out of mine(but thicker in concentration) when I clean my P/P. I've got Birds that are starting to molt. His dust is worse than mine but it looks to be about the same consistency in the particle scale. The birds are directly across from my system.

Now you know why I run MDPCiFlex filters. Remove them Rinse let dry do something else while the system is down pop them back on and restart the sig rig. Takes about 15 minutes total.

~Ceadder
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #17458 of 28252
Quote:
Originally Posted by Ceadderman View Post
That dust looks like what I get out of mine(but thicker in concentration) when I clean my P/P. I've got Birds that are starting to molt. His dust is worse than mine but it looks to be about the same consistency in the particle scale. The birds are directly across from my system.

Now you know why I run MDPCiFlex filters. Remove them Rinse let dry do something else while the system is down pop them back on and restart the sig rig. Takes about 15 minutes total.

~Ceadder
Yeah I have no birds in my house and my dog is an outside dog but I have had my window open the last few weeks along with the ceiling fan going so I'm sure thats not helping my situation. We do have wall to wall carpeting in that room as well so that could be an issue although the front intake fans filter never gets like that. I'm not overly concerned I got the H50 in p/p exhausting out the rear now and I've run that for a long time in the past with no dust problems what so ever.


Quote:
Originally Posted by CircuitFreak View Post
Just installed a H50 after trading my V6Gt for it. Seems like the temps are about even between the coolers so far and a whole lot quieter.

Is it me or is that blue fan in your drive bay blowing against the front intake fan?
Edited by DJ4g63t - 4/22/11 at 7:13am
Turbo Toilet
(9 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @4.5Ghz ASRock Z68 Extreme3 Gen3 Sapphire HD7950 Boost @ 1125/1400 G.Skill Ripjaws X (8gb x 2) 
Hard DriveCoolingOSMonitor
Crucial MX100 240GB SSD Hyper 212 Evo Windows 7 Ultimate Samsung S24C650 1920x1200 
Case
Antec 300 
  hide details  
Reply
Turbo Toilet
(9 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @4.5Ghz ASRock Z68 Extreme3 Gen3 Sapphire HD7950 Boost @ 1125/1400 G.Skill Ripjaws X (8gb x 2) 
Hard DriveCoolingOSMonitor
Crucial MX100 240GB SSD Hyper 212 Evo Windows 7 Ultimate Samsung S24C650 1920x1200 
Case
Antec 300 
  hide details  
Reply
post #17459 of 28252
Just you lol , It's one of Antecs video card fan setups that would intake from the back in stock form , so I made a mount to take the cool front air instead of the dead semi warm air from the back.

http://www.newegg.com/Product/Produc...82E16835209016

Unfortunatly had to buy two to get the fan to line up with the GPU fan correctly but it has helped drop the temps. i think i see 75 c max with a mild OC on it and 70% fan fixed.
MOAR FANS
(10 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77 UD5H HD 7950 G skill Ripjaws X 
CoolingOSKeyboardPower
EK supreme HF Win 7 Logitech G15 Thermaltake TR2 850W 
CaseMouse
switch 810 Logitech MX620 
  hide details  
Reply
MOAR FANS
(10 items)
 
  
CPUMotherboardGraphicsRAM
i5 3570k Gigabyte Z77 UD5H HD 7950 G skill Ripjaws X 
CoolingOSKeyboardPower
EK supreme HF Win 7 Logitech G15 Thermaltake TR2 850W 
CaseMouse
switch 810 Logitech MX620 
  hide details  
Reply
post #17460 of 28252
Quote:
Originally Posted by CircuitFreak View Post
Just you lol , It's one of Antecs video card fan setups that would intake from the back in stock form , so I made a mount to take the cool front air instead of the dead semi warm air from the back.

http://www.newegg.com/Product/Produc...82E16835209016

Unfortunatly had to buy two to get the fan to line up with the GPU fan correctly but it has helped drop the temps. i think i see 75 c max with a mild OC on it and 70% fan fixed.
Ah I see lol. Most of those types of fans I've seen has always exhausted air out the back of the case not intake air. I know guys used to take those and modify them to suck air in. I assumed you had it set up as an intake but I was just curious lol.
Turbo Toilet
(9 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @4.5Ghz ASRock Z68 Extreme3 Gen3 Sapphire HD7950 Boost @ 1125/1400 G.Skill Ripjaws X (8gb x 2) 
Hard DriveCoolingOSMonitor
Crucial MX100 240GB SSD Hyper 212 Evo Windows 7 Ultimate Samsung S24C650 1920x1200 
Case
Antec 300 
  hide details  
Reply
Turbo Toilet
(9 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k @4.5Ghz ASRock Z68 Extreme3 Gen3 Sapphire HD7950 Boost @ 1125/1400 G.Skill Ripjaws X (8gb x 2) 
Hard DriveCoolingOSMonitor
Crucial MX100 240GB SSD Hyper 212 Evo Windows 7 Ultimate Samsung S24C650 1920x1200 
Case
Antec 300 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club