Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 1847

post #18461 of 28252
Quote:
Originally Posted by Ceadderman View Post
Nope it's not accurate. Screws are 6-32 thread pitch. For a fan & 25mm shroud you need screws that are 2.25" in length and may need a washer on them depending on the fan body if the flanges are reinforced with the tube then no washer. If they are open bodied you will want a washer on the screws to allow for flex when tightening the fan to the Radiator. This helps protect the fins from puncture. There is no backstop for the screws.

~Ceadder
So if i wanted to just mount another 120mm fan that's 25mm wide itself to the front, i should just use the 1.5" screw?

I get the feeling the stock screws aren't long enough to mount from my chassis, but it could be because of the rubber grommets on the screw holes with the 600T, i only have bout half a CM of "screw" after threading it through the fan to screw onto the radiator

All this is ofcourse just pending until the H100 comes
post #18462 of 28252
just put two of the screws opposite diagonally on one fan and two on the other, and if u are worried incase of or to prevent rattling put a bit of blutak between fan and rad where the screws are missing......job done .....ten minutes.....
TheFlyer
(14 items)
 
  
CPUMotherboardGraphicsRAM
FX8120 GIGABYTE UD5 REV1 XFX HD6950 G.Skill RipJaws Z 4x4GB 
Hard DriveOptical DriveCoolingOS
Vertex 4 128GB Sony Optiaric XSPC Rasa 240 7/64/ULT 
MonitorKeyboardPowerCase
Benq G2420HD 24" LCD yep NZXT Hale 750 NZXT Phantom White 
MouseMouse Pad
yep nope 
  hide details  
Reply
TheFlyer
(14 items)
 
  
CPUMotherboardGraphicsRAM
FX8120 GIGABYTE UD5 REV1 XFX HD6950 G.Skill RipJaws Z 4x4GB 
Hard DriveOptical DriveCoolingOS
Vertex 4 128GB Sony Optiaric XSPC Rasa 240 7/64/ULT 
MonitorKeyboardPowerCase
Benq G2420HD 24" LCD yep NZXT Hale 750 NZXT Phantom White 
MouseMouse Pad
yep nope 
  hide details  
Reply
post #18463 of 28252
Yeah but I don't feel like "rigging" it. I want to buy 4 more of the correct screws to mount the second fan...
post #18464 of 28252
Quote:
Originally Posted by Majin SSJ Eric View Post
Yeah but I don't feel like "rigging" it. I want to buy 4 more of the correct screws to mount the second fan...
Just take one of your screws and see if you can't get a match for it at your local hardware store. They should have a gauge handy to tell you how long it needs to be. The stock fan is 25mm thick. But I suggest getting a pair of fans and converting the stocker into a shroud. It keeps the unit quieter, and allows for more airflow coming off the push fan when mounted between Push and Radiator. Which allows for better temps. Can't say in your case it would be a sharp reduction in temps but it can't hurt.

~Ceadder
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #18465 of 28252
Quote:
Originally Posted by Majin SSJ Eric View Post
Yeah but I don't feel like "rigging" it. I want to buy 4 more of the correct screws to mount the second fan...
You need 6-32 x 1.25 inches, good luck finding them Fleabay usually have some...
TheFlyer
(14 items)
 
  
CPUMotherboardGraphicsRAM
FX8120 GIGABYTE UD5 REV1 XFX HD6950 G.Skill RipJaws Z 4x4GB 
Hard DriveOptical DriveCoolingOS
Vertex 4 128GB Sony Optiaric XSPC Rasa 240 7/64/ULT 
MonitorKeyboardPowerCase
Benq G2420HD 24" LCD yep NZXT Hale 750 NZXT Phantom White 
MouseMouse Pad
yep nope 
  hide details  
Reply
TheFlyer
(14 items)
 
  
CPUMotherboardGraphicsRAM
FX8120 GIGABYTE UD5 REV1 XFX HD6950 G.Skill RipJaws Z 4x4GB 
Hard DriveOptical DriveCoolingOS
Vertex 4 128GB Sony Optiaric XSPC Rasa 240 7/64/ULT 
MonitorKeyboardPowerCase
Benq G2420HD 24" LCD yep NZXT Hale 750 NZXT Phantom White 
MouseMouse Pad
yep nope 
  hide details  
Reply
post #18466 of 28252
My h70 pump speeds are about 400rpm lower than they should be according to ASUS AI suite. Any idea on how I can fix that?
Nightwing
(27 items)
 
  
CPUMotherboardGraphicsGraphics
i7 950 Asus P6X58D-E MSI 390x Gaming 8 GB  XFX Radeon HD 5870 
GraphicsRAMHard DriveHard Drive
MSI 290X Lightning G.SKILL PI Series 6GB WD Caviar Black HDD Crucial C300 SSD 
Hard DriveOptical DriveCoolingCooling
Clickfree External HDD HP BD240I Blu Ray Combo Drive Corsair H70 with GT AP-15's in Push/Pull Intake... Scythe Kama Flex SA1325FDB12H Case Fan 
OSMonitorKeyboardPower
Windows 7 64 bit Ultimate Edition Alienware Optx AW2310 Deck Legend - Ice - Linear PS/2 Interface Corsair AX750 Modular Power Supply 
CaseMouseMouse PadAudio
Enthoo Luxe Logitech MX 518 Gaming-Grade Optical Mouse SteelSeries SX Game Pad Sound Blaster X-Fi Titanium HD  
AudioAudioOtherOther
Sennheiser HD 650 Schiit Magni Headphones Amplifier Logitech C905 Webcam Blue Yeti Microphone 
OtherOtherOther
Bose QC3 Headphones Creative 2.1 Speaker System Xbox 360 Wired Controller 
  hide details  
Reply
Nightwing
(27 items)
 
  
CPUMotherboardGraphicsGraphics
i7 950 Asus P6X58D-E MSI 390x Gaming 8 GB  XFX Radeon HD 5870 
GraphicsRAMHard DriveHard Drive
MSI 290X Lightning G.SKILL PI Series 6GB WD Caviar Black HDD Crucial C300 SSD 
Hard DriveOptical DriveCoolingCooling
Clickfree External HDD HP BD240I Blu Ray Combo Drive Corsair H70 with GT AP-15's in Push/Pull Intake... Scythe Kama Flex SA1325FDB12H Case Fan 
OSMonitorKeyboardPower
Windows 7 64 bit Ultimate Edition Alienware Optx AW2310 Deck Legend - Ice - Linear PS/2 Interface Corsair AX750 Modular Power Supply 
CaseMouseMouse PadAudio
Enthoo Luxe Logitech MX 518 Gaming-Grade Optical Mouse SteelSeries SX Game Pad Sound Blaster X-Fi Titanium HD  
AudioAudioOtherOther
Sennheiser HD 650 Schiit Magni Headphones Amplifier Logitech C905 Webcam Blue Yeti Microphone 
OtherOtherOther
Bose QC3 Headphones Creative 2.1 Speaker System Xbox 360 Wired Controller 
  hide details  
Reply
post #18467 of 28252
Quote:
Originally Posted by Gohan_Nightwing View Post
My h70 pump speeds are about 400rpm lower than they should be according to ASUS AI suite. Any idea on how I can fix that?
What connector is it attached to? Seems like thatsthe problem, IF indeed it is a problem? My H50 keeps system at same temp exactly whether I have it at anything between 800 and 1400 rpm but I have added a res and more tubing so dont know if that accounts for it. I run it with a fan volt step down fan thing between the mobo pwr fan connector and pump it runs at 1000 rpm

If you havent any fan connectors left on mobo, stick the pump on a 3pin fan to molex connector
Edited by moonmanas - 6/16/11 at 6:10pm
TheFlyer
(14 items)
 
  
CPUMotherboardGraphicsRAM
FX8120 GIGABYTE UD5 REV1 XFX HD6950 G.Skill RipJaws Z 4x4GB 
Hard DriveOptical DriveCoolingOS
Vertex 4 128GB Sony Optiaric XSPC Rasa 240 7/64/ULT 
MonitorKeyboardPowerCase
Benq G2420HD 24" LCD yep NZXT Hale 750 NZXT Phantom White 
MouseMouse Pad
yep nope 
  hide details  
Reply
TheFlyer
(14 items)
 
  
CPUMotherboardGraphicsRAM
FX8120 GIGABYTE UD5 REV1 XFX HD6950 G.Skill RipJaws Z 4x4GB 
Hard DriveOptical DriveCoolingOS
Vertex 4 128GB Sony Optiaric XSPC Rasa 240 7/64/ULT 
MonitorKeyboardPowerCase
Benq G2420HD 24" LCD yep NZXT Hale 750 NZXT Phantom White 
MouseMouse Pad
yep nope 
  hide details  
Reply
post #18468 of 28252
Quote:
Originally Posted by moonmanas View Post
What connector is it attached to? Seems like thatsthe problem, IF indeed it is a problem? My H50 keeps system at same temp exactly whether I have it at anything between 800 and 1400 rpm but I have added a res and more tubing so dont know if that accounts for it. I run it with a fan volt step down fan thing between the mobo pwr fan connector and pump it runs at 1000 rpm

If you havent any fan connectors left on mobo, stick the pump on a 3pin fan to molex connector
I got it running up to 1400rpms now . What I did was use a left over molex/fan connector from the gt ap-15s I bought so instead of running it through the mobo alone, I got the PSU running it while monitoring its speed via the mobo.

However, like you I didn't get any temp improvements :/
Nightwing
(27 items)
 
  
CPUMotherboardGraphicsGraphics
i7 950 Asus P6X58D-E MSI 390x Gaming 8 GB  XFX Radeon HD 5870 
GraphicsRAMHard DriveHard Drive
MSI 290X Lightning G.SKILL PI Series 6GB WD Caviar Black HDD Crucial C300 SSD 
Hard DriveOptical DriveCoolingCooling
Clickfree External HDD HP BD240I Blu Ray Combo Drive Corsair H70 with GT AP-15's in Push/Pull Intake... Scythe Kama Flex SA1325FDB12H Case Fan 
OSMonitorKeyboardPower
Windows 7 64 bit Ultimate Edition Alienware Optx AW2310 Deck Legend - Ice - Linear PS/2 Interface Corsair AX750 Modular Power Supply 
CaseMouseMouse PadAudio
Enthoo Luxe Logitech MX 518 Gaming-Grade Optical Mouse SteelSeries SX Game Pad Sound Blaster X-Fi Titanium HD  
AudioAudioOtherOther
Sennheiser HD 650 Schiit Magni Headphones Amplifier Logitech C905 Webcam Blue Yeti Microphone 
OtherOtherOther
Bose QC3 Headphones Creative 2.1 Speaker System Xbox 360 Wired Controller 
  hide details  
Reply
Nightwing
(27 items)
 
  
CPUMotherboardGraphicsGraphics
i7 950 Asus P6X58D-E MSI 390x Gaming 8 GB  XFX Radeon HD 5870 
GraphicsRAMHard DriveHard Drive
MSI 290X Lightning G.SKILL PI Series 6GB WD Caviar Black HDD Crucial C300 SSD 
Hard DriveOptical DriveCoolingCooling
Clickfree External HDD HP BD240I Blu Ray Combo Drive Corsair H70 with GT AP-15's in Push/Pull Intake... Scythe Kama Flex SA1325FDB12H Case Fan 
OSMonitorKeyboardPower
Windows 7 64 bit Ultimate Edition Alienware Optx AW2310 Deck Legend - Ice - Linear PS/2 Interface Corsair AX750 Modular Power Supply 
CaseMouseMouse PadAudio
Enthoo Luxe Logitech MX 518 Gaming-Grade Optical Mouse SteelSeries SX Game Pad Sound Blaster X-Fi Titanium HD  
AudioAudioOtherOther
Sennheiser HD 650 Schiit Magni Headphones Amplifier Logitech C905 Webcam Blue Yeti Microphone 
OtherOtherOther
Bose QC3 Headphones Creative 2.1 Speaker System Xbox 360 Wired Controller 
  hide details  
Reply
post #18469 of 28252
OK I know that this question has been asked to death probably here but I'm gonna ask anyways because I NEED to know the answer tonight so I can get the item tomorrow. What size screws do I need to attach a 120mm X 120mm X 38mm fan with a 120mm X 120mm X 25mm shroud to a H70? I will make a really rough "mock" drawing in MS Paint and attach it so you can see exactly what I am asking for so that there is no question at all. Basically the questions that I need answers to is as follows:

1) What size do screws 1, 2, 3, and 4 need to be ( I think they need to be slightly longer by a fraction of a mm because of the thickness of the wall of the case but I might be wrong too)

2) What size washers do I need for screws 1, 2, 3, and 4?

3) What size do screws 5, 6, 7, and 8 need to be?

4) What size washers do I need for screws 5, 6, 7, and 8?

5) What would the screw and washer sizes be for all of the screws (basically answer the above questions but with the following parameter) if both the fans and the shrouds were the same size ( Fan 1=120mm x 120mm x 25mm, Shroud 1=120mm x 120mm x 25mm, Shroud 2=120mm x 120mm x 25mm, fan 2=120mm x 120mm x 25mm)? Please let me know if you need further clarification but if you still do with a diagram and 5 paraphrased questions then I don't know what to say lol.
post #18470 of 28252
hey guys, i wanna know if p/p scythe s-flex g is worth it for h50? 2 fans for 33$ also im checking the CM excalibur also but they its like a jet engine taking off..
love mah rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 4670k azrock z87 extreme 4 MSI 7950 windforce (Xfire) Corsair DDR3 8gb 
Hard DriveHard DriveHard DriveCooling
hyperX 120gb  wd black 600gb WD green 1.5tb zalman 9900 max 
OSMonitorKeyboardPower
windows 7 ultimate(x64) Vizio 32" corsair  corsait 750watts 
CaseMouse
thermaltake chaser mk-1 logitech G500 
  hide details  
Reply
love mah rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5 4670k azrock z87 extreme 4 MSI 7950 windforce (Xfire) Corsair DDR3 8gb 
Hard DriveHard DriveHard DriveCooling
hyperX 120gb  wd black 600gb WD green 1.5tb zalman 9900 max 
OSMonitorKeyboardPower
windows 7 ultimate(x64) Vizio 32" corsair  corsait 750watts 
CaseMouse
thermaltake chaser mk-1 logitech G500 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club