Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 1849

post #18481 of 28365
Anyone know the life expectancy of the pumps in the H60? Also, I plugged the pump straight into a molar connector.... Is that a bad idea or should I plug it directly into a fan connector on the motherboard? In other words, will it burn out a lot faster if its running full blast?
post #18482 of 28365
pluf it into the CPU fan connection on your MoBo, this will give you the bets compatabiity. use another 3pin next, and a molex last imho
post #18483 of 28365
Actually, I meant to say that it is plugged into the three pin designated for the fan that goes to the PSU... I am thinking that this pin is on full blast seeing that my mobo has no controlls for it. Its an M4N98TD EVO Asus..... I dont want to plug it into the processor fan connector because that is reserved for a fan that will turn my house into a wind tunnel if its plugged into.... Welll.... its a long complicated story...
Edited by euthyphro - 6/17/11 at 11:31pm
post #18484 of 28365
Do I need to register it online somewhere or something in order to redeem the warranty?
post #18485 of 28365
Quote:
Originally Posted by euthyphro View Post
Actually, I meant to say that it is plugged into the three pin designated for the fan that goes to the PSU... I am thinking that this pin is on full blast seeing that my mobo has no controlls for it. Its an M4N98TD EVO Asus..... I dont want to plug it into the processor fan connector because that is reserved for a fan that will turn my house into a wind tunnel if its plugged into.... Welll.... its a long complicated story...
that's fine, albeit not being able to regulate the speed. there should be no harm in doing so as long as the voltage doesn't exceed 12v or 5v (whichever it uses, most use 12v I think) your other option would be to get a fan controller.
Cygni
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 4790k 4.7GHz delid w/ CLU Asus Maximus VII Formula GeForce GTX 1080 FE w/ fullcover block 32GB (4x8GB) G.Skill TridentX 2400MHz CL10 
Hard DriveHard DriveCoolingOS
Samsung 950 Pro 512GB NVMe M.2 Sandisk X400 1TB mSATA SSD Custom Liquid Cooling Loop Windows 10 Pro 
MonitorKeyboardPowerCase
Acer Predator X34 34" IPS/G-Sync Curved UltraWi... Logitech G910 Orion Spark Mechanical RGB Gaming... EVGA SuperNOVA 1000 P2 w/ Noctua NF-P14s Redux Lian-Li Armorsuit PC-P50R w/ W-LM2AB-1 side pan... 
MouseMouse PadAudioOther
Logitech G900 Chaos Spectrum Logitech G240 Cloth Gaming Pad HDMI->Custom 7.1 Home Theater Sony Dualshock 4 Controller 
OtherOther
Intel I210T1 Ethernet Server Adapter Intel Wireless-AC/Bluetooth 7260 Network Adapter 
  hide details  
Reply
Cygni
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 4790k 4.7GHz delid w/ CLU Asus Maximus VII Formula GeForce GTX 1080 FE w/ fullcover block 32GB (4x8GB) G.Skill TridentX 2400MHz CL10 
Hard DriveHard DriveCoolingOS
Samsung 950 Pro 512GB NVMe M.2 Sandisk X400 1TB mSATA SSD Custom Liquid Cooling Loop Windows 10 Pro 
MonitorKeyboardPowerCase
Acer Predator X34 34" IPS/G-Sync Curved UltraWi... Logitech G910 Orion Spark Mechanical RGB Gaming... EVGA SuperNOVA 1000 P2 w/ Noctua NF-P14s Redux Lian-Li Armorsuit PC-P50R w/ W-LM2AB-1 side pan... 
MouseMouse PadAudioOther
Logitech G900 Chaos Spectrum Logitech G240 Cloth Gaming Pad HDMI->Custom 7.1 Home Theater Sony Dualshock 4 Controller 
OtherOther
Intel I210T1 Ethernet Server Adapter Intel Wireless-AC/Bluetooth 7260 Network Adapter 
  hide details  
Reply
post #18486 of 28365
I plan on modding my H60 w/ into a double rad with a T-junction instead of a reservorr, but fillports are kinda expensive. does anyone know where I can get just a simple plug to plug the end of the T after filling? or is there a way to fill it without a T-junction and make it a closed loop? (and can anyone recommend some good low-permeable tubing? It's hard to find good 1/4" tubing)

I'm trying to do this on the cheap since I don't have the money for a real W/C loop.
Cygni
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 4790k 4.7GHz delid w/ CLU Asus Maximus VII Formula GeForce GTX 1080 FE w/ fullcover block 32GB (4x8GB) G.Skill TridentX 2400MHz CL10 
Hard DriveHard DriveCoolingOS
Samsung 950 Pro 512GB NVMe M.2 Sandisk X400 1TB mSATA SSD Custom Liquid Cooling Loop Windows 10 Pro 
MonitorKeyboardPowerCase
Acer Predator X34 34" IPS/G-Sync Curved UltraWi... Logitech G910 Orion Spark Mechanical RGB Gaming... EVGA SuperNOVA 1000 P2 w/ Noctua NF-P14s Redux Lian-Li Armorsuit PC-P50R w/ W-LM2AB-1 side pan... 
MouseMouse PadAudioOther
Logitech G900 Chaos Spectrum Logitech G240 Cloth Gaming Pad HDMI->Custom 7.1 Home Theater Sony Dualshock 4 Controller 
OtherOther
Intel I210T1 Ethernet Server Adapter Intel Wireless-AC/Bluetooth 7260 Network Adapter 
  hide details  
Reply
Cygni
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 4790k 4.7GHz delid w/ CLU Asus Maximus VII Formula GeForce GTX 1080 FE w/ fullcover block 32GB (4x8GB) G.Skill TridentX 2400MHz CL10 
Hard DriveHard DriveCoolingOS
Samsung 950 Pro 512GB NVMe M.2 Sandisk X400 1TB mSATA SSD Custom Liquid Cooling Loop Windows 10 Pro 
MonitorKeyboardPowerCase
Acer Predator X34 34" IPS/G-Sync Curved UltraWi... Logitech G910 Orion Spark Mechanical RGB Gaming... EVGA SuperNOVA 1000 P2 w/ Noctua NF-P14s Redux Lian-Li Armorsuit PC-P50R w/ W-LM2AB-1 side pan... 
MouseMouse PadAudioOther
Logitech G900 Chaos Spectrum Logitech G240 Cloth Gaming Pad HDMI->Custom 7.1 Home Theater Sony Dualshock 4 Controller 
OtherOther
Intel I210T1 Ethernet Server Adapter Intel Wireless-AC/Bluetooth 7260 Network Adapter 
  hide details  
Reply
post #18487 of 28365
Quote:
Originally Posted by s74r1 View Post
I plan on modding my H60 w/ into a double rad with a T-junction instead of a reservorr, but fillports are kinda expensive. does anyone know where I can get just a simple plug to plug the end of the T after filling? or is there a way to fill it without a T-junction and make it a closed loop? (and can anyone recommend some good low-permeable tubing? It's hard to find good 1/4" tubing)

I'm trying to do this on the cheap since I don't have the money for a real W/C loop.
It's save alittle longer and get a XSPC Rasa 750 RS240 http://www.jab-tech.com/XSPC-Rasa-75...t-pr-4753.html
post #18488 of 28365
I cleaned all the dust out of my case, unclogged the dust caked radiator, reapplied AS5 to my CPU, remounted the waterblock with a steel backplate from my mobo and not the Corsair one, and used a socket wrench to tighten down the screws on the waterblock bracket. CPU temps before: 47C max, 29C idle; after: 34C max, 19C idle. Feels good man.
Edited by videoman5 - 6/18/11 at 2:07am
Clasicos
(16 items)
 
Proletariatop
(13 items)
 
Upgrayedds
(4 items)
 
CPUMotherboardGraphicsGraphics
Phenom II X6 1090T 4.1ghz|1.60v GA-MA790X-UD4P Sapphire 6870|1GhzCore 1.27GhzMem nVidia Quadro NVS 290 
GraphicsRAMHard DriveOptical Drive
Sapphire 6870|1GhzCore 1.27GhzMem 2x2GB Geil 800 + 2x2GB Micron 800 2x Hitachi 500 GB RAID1 + 870 GB JBOD Optiarc DVD-RAM 
OSMonitorKeyboardPower
Windows 7 Ultimate x64 1x Hanns·G 28" + 2x AOC 20" + 1x Envision 19" Unicomp Customizer Corsair GS600 
CaseMouseMouse PadAudio
Xigmatek Utgard Logitech MX518 Waxed wooden surface. XFi XtremeGamer 
CPUMotherboardGraphicsRAM
AMD Fusion E-240 @ 1.5Ghz Hudson D1 Chipset AMD Radeon 6310 2x4GB DDR3 1333 
Hard DriveOSMonitorPower
Crucial M4 64GB Ubuntu 12.04 w/LXDE 11.6" 1366x768 3-cell lithium ion 
Case
ThinkPad X Series X120e 
CPUGraphicsGraphicsPower
AMD 1090T AMD 6870 AMD 6870 Thermaltake Toughpower XT TPX-775M 775W PSU 
  hide details  
Reply
Clasicos
(16 items)
 
Proletariatop
(13 items)
 
Upgrayedds
(4 items)
 
CPUMotherboardGraphicsGraphics
Phenom II X6 1090T 4.1ghz|1.60v GA-MA790X-UD4P Sapphire 6870|1GhzCore 1.27GhzMem nVidia Quadro NVS 290 
GraphicsRAMHard DriveOptical Drive
Sapphire 6870|1GhzCore 1.27GhzMem 2x2GB Geil 800 + 2x2GB Micron 800 2x Hitachi 500 GB RAID1 + 870 GB JBOD Optiarc DVD-RAM 
OSMonitorKeyboardPower
Windows 7 Ultimate x64 1x Hanns·G 28" + 2x AOC 20" + 1x Envision 19" Unicomp Customizer Corsair GS600 
CaseMouseMouse PadAudio
Xigmatek Utgard Logitech MX518 Waxed wooden surface. XFi XtremeGamer 
CPUMotherboardGraphicsRAM
AMD Fusion E-240 @ 1.5Ghz Hudson D1 Chipset AMD Radeon 6310 2x4GB DDR3 1333 
Hard DriveOSMonitorPower
Crucial M4 64GB Ubuntu 12.04 w/LXDE 11.6" 1366x768 3-cell lithium ion 
Case
ThinkPad X Series X120e 
CPUGraphicsGraphicsPower
AMD 1090T AMD 6870 AMD 6870 Thermaltake Toughpower XT TPX-775M 775W PSU 
  hide details  
Reply
post #18489 of 28365
Quote:
Originally Posted by videoman5 View Post
I cleaned all the dust out of my case, unclogged the dust caked radiator, reapplied AS5 to my CPU, remounted the waterblock with a steel backplate from my mobo and not the Corsair one, and used a socket wrench to tighten down the screws on the waterblock bracket. CPU temps before: 47C max, 29C idle; after: 34C max, 19C idle. Feels good man.
Excellent work, it is amazing what a little maintenance can do sometime. I need to clean my Rad soon as well.

Sent from my HTC Wildfire using Tapatalk
Perseus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1100T ASUS M4A88TD-V EVO/USB3 Visiontek RadeonHD 6950 2GB (Unlocked) 880MHz 8GB Corsair XMS3 1333 (CMX8GX3M2A1333C9) 
Hard DriveOptical DriveOSMonitor
Corsair Force3 120GB, (2x) Seagate 1TB RAID-0 DVD-RW Win7 x64 / BT5 HP w2338h 23" Widescreen 
PowerCase
Thermaltake TR2-RX 850W Corsair Graphite 600T 
  hide details  
Reply
Perseus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X6 1100T ASUS M4A88TD-V EVO/USB3 Visiontek RadeonHD 6950 2GB (Unlocked) 880MHz 8GB Corsair XMS3 1333 (CMX8GX3M2A1333C9) 
Hard DriveOptical DriveOSMonitor
Corsair Force3 120GB, (2x) Seagate 1TB RAID-0 DVD-RW Win7 x64 / BT5 HP w2338h 23" Widescreen 
PowerCase
Thermaltake TR2-RX 850W Corsair Graphite 600T 
  hide details  
Reply
post #18490 of 28365
Quote:
Originally Posted by euthyphro View Post
Do I need to register it online somewhere or something in order to redeem the warranty?
1)Register it at Corsair.com for the warranty.

2) Best place to plug the unit in is the PWR connection. CPU is PWM and you want your Pump running full speed. Plugging it into the PWM or other fan header(JiC of no PWR header) will allow your BIOS to adjust it to run full speed and your HWMonitor to read it and report its speed. This way you can keep an eye on it and know that it's running properly. Plugging directly into a PSU connection will only run it full speed and not give reports. If your PSU has a problem on that connection how would you know until it's too late?

~Ceadder
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club