Originally Posted by Mergatroid;13932117
You betcha. My main case is a 600T, and I have an H70 mounted in the top. It was not a "plug and play" mounting. The memory on my mobo got in the way of the bottom fan so I had to mod the case a little to move the H70 enough to avoid the RAM. However, the H50 is smaller. You may be able to fit it with push/pull without modding the case.
Here's a pic of the H70 mounted at the top of the 600T:
And here's a pic of how I had to offset the entire assembly by about an inch to avoid my memory:
Ignore the fan orientation. I was using it as intake, but I have since changed it to exhaust.
I have just changed my H50 rad to the top of the my 600T. I can confirm for the H50, you will need to offset the rad, like Mergatroid did, as well (if you plan on a push/pull config).
With my new setup, I have gotten away from the push/pull config. With my current setup and airflow I am noticing zero benefit with the push/pull. It almost seemed as if the push/pull was restricting airflow through the rad. I am sure that with a fan shroud this would not be the case. However, I have no plans to build a gigantic monstrosity of shrouds/fans etc... I'm trying to bring the system back to the basics and it seems to be working. Current temps: Ambient Temp: 20C // CPU Idle: 26C // CPU Load (45min Prime95): 46C