Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 1862

post #18611 of 28303

I was trying to get a good recording of the noise my H50 is making in my 2nd computer. It doesn't seem as bad today, and I just can't get the recording to record the same noise as my ear is hearing. For a second I touched the pump with my cell phone and you can hear a sort of buzzing noise, and as I pull the phone away, again for only a second, you can almost make out the buzzing or rattling noise it's making. I have nothing to compare it to except my H70 which is basically silent.


I think I'm going to let it slide until I finish the side panels. If I can hear it from the outside with the panels on I will RMA it. If I cannot hear it then I am going to leave it. I really wish I had of got that H60 (for the 10th time).

For anyone who is interested in case flow, here is some information from Corsair George on case flow relating to which type of video card you have:

http://www.overclock.net/computer-ca...-club-202.html

His comment is at the bottom of the page.

I have seen other discussions from people who have changed their top fans to intake and gotten good results.
Edited by Mergatroid - 6/26/11 at 6:08pm
Nukeyork
(24 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 4770k ASUS Sabertooth Z87 MSI Radeon RX480 Gaming X 8GB MSI Radeon RX480 Gaming X 8GB 
RAMHard DriveHard DriveHard Drive
16G Kingston 1600MHz Corsair Force Series SSD 180GB Crucial MX300 SSD 525GB Western Digital WD10EALS 1TB 
Optical DriveCoolingOSMonitor
ASUS BW-12B1ST Blu-ray RW Thermaltake Water 3.0 Ultimate Windows 10 64 pro LG 34UM65-P 
KeyboardPowerCaseMouse
Hcman Zhuque Teamwolf Mechanical Corsair AX750 Corsair 760T Steel Series Sensei Wireless Gaming Mouse 
Mouse PadAudioOtherOther
Steel Series 4HD Pro On Board Thermaltake X 5G Superspeed USB 3.0 Hard Drive ... Logitech Driving Force GT Steering Wheel 
OtherOtherOtherOther
Thrustmaster T.Flight Hotas X Joystick NZXT Hue LED Controller Razer Orbweaver Chroma RGB Mechanical Gaming Co... Ergotron LX Desk Mount LCD Arm 
  hide details  
Reply
Nukeyork
(24 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7 4770k ASUS Sabertooth Z87 MSI Radeon RX480 Gaming X 8GB MSI Radeon RX480 Gaming X 8GB 
RAMHard DriveHard DriveHard Drive
16G Kingston 1600MHz Corsair Force Series SSD 180GB Crucial MX300 SSD 525GB Western Digital WD10EALS 1TB 
Optical DriveCoolingOSMonitor
ASUS BW-12B1ST Blu-ray RW Thermaltake Water 3.0 Ultimate Windows 10 64 pro LG 34UM65-P 
KeyboardPowerCaseMouse
Hcman Zhuque Teamwolf Mechanical Corsair AX750 Corsair 760T Steel Series Sensei Wireless Gaming Mouse 
Mouse PadAudioOtherOther
Steel Series 4HD Pro On Board Thermaltake X 5G Superspeed USB 3.0 Hard Drive ... Logitech Driving Force GT Steering Wheel 
OtherOtherOtherOther
Thrustmaster T.Flight Hotas X Joystick NZXT Hue LED Controller Razer Orbweaver Chroma RGB Mechanical Gaming Co... Ergotron LX Desk Mount LCD Arm 
  hide details  
Reply
post #18612 of 28303
Quote:
Originally Posted by Ceadderman View Post
As long as there are no kinks in the hoses that should be perfect. Any air in the system will be trapped away from the hoses in the topside of the Radiator. You can run it in Intake if you wish but I doubt you'll see much of a decrease in temps because it would be fighting simple physics. That being that heat rises.

Wherever you plug your pump in make sure that that header is running 100% or 90%. Anything less, "Ignore" and that will keep your pump scooting along beautifully.

~Ceadder
Yeah, i have it plugged to SYSFAN1, and turned off all regulations on it on BIOS. On HWMonitor i always get 1390-1410 RPM, which should be the normal speed, so no problems on that side. Hoses are also as shown, no kinks or that. I tried placing in all positions but that one come as the least forced for the hoses, and the easiest to install.

Rad fans are conencted to CPUFAN, but those are only 3-pin fans, so they always get max speed. The F9's are connected to SYSFAN2, the only BIOS-regulated fan for intake and PWM (even tho they're already silent even on max), so they give fresh air to the HDD's, PSU and rad.

I had to do a bit of a ghetto mod on this case, as it wouldn't fit a 120mm fan (i even had to mod the 80mm holes into 92mm to fit the F9's on the front and back, both as intakes). Plus, i kinda thought to place it on the top also because of physics
Edited by Starbomba - 6/26/11 at 6:32pm
X79 The Hydra
(22 items)
 
 
i865G Chronos
(15 items)
 
CPUMotherboardGraphicsRAM
Core 2 Extreme X6800 AsRock 775i65G R2.0 ATI Radeon X1950 XT OCZ EL DDR Gold Edition GX 
Hard DriveOptical DriveCoolingOS
Samsung MMBRE64GHDXP-MVBD1 Samsung SH-222 Thermalright Ultima-90 Windows 98 SE 
OSMonitorKeyboardPower
Windows XP Professional 32 bit Dell SP2309W Genius SlimStar 8000 Generic 500w PSU 
CaseMouseAudio
Generic Case Genius SlimStar 8000 Creative Sound Blaster Audigy 2 ZS 
  hide details  
Reply
X79 The Hydra
(22 items)
 
 
i865G Chronos
(15 items)
 
CPUMotherboardGraphicsRAM
Core 2 Extreme X6800 AsRock 775i65G R2.0 ATI Radeon X1950 XT OCZ EL DDR Gold Edition GX 
Hard DriveOptical DriveCoolingOS
Samsung MMBRE64GHDXP-MVBD1 Samsung SH-222 Thermalright Ultima-90 Windows 98 SE 
OSMonitorKeyboardPower
Windows XP Professional 32 bit Dell SP2309W Genius SlimStar 8000 Generic 500w PSU 
CaseMouseAudio
Generic Case Genius SlimStar 8000 Creative Sound Blaster Audigy 2 ZS 
  hide details  
Reply
post #18613 of 28303
Quote:
Originally Posted by Freaxy View Post
Wow, didn't expect that big of a difference. Having my back of the PC near a wall I feel a lot of heat behind it. Way hotter then the inside of my case. That's the reason of my thought.
It may not be a big difference in your case, since it's right next to a wall. If it had more open space, intake is the way to go.
    
CPUMotherboardGraphicsRAM
Intel i5 3570K [Delid] Asrock Z77E-ITX XFX Radeon R9 Fury X G.SKILL 2133MHz 8GB DDR3 
Hard DriveHard DriveHard DriveHard Drive
Crucial M4 256GB Silicon Power S60 120GB Western Digital Blue Scorpio 1TB Seagate Constellation 2 1TB 
CoolingCoolingCoolingCooling
Swiftech Apogee Drive II XSPC RX240+EX240 [Painted White] 5x 2150RPM Gentle Typhoons PWM [Painted Black+W... Bitspower Water Tank Z-Multi 80 Inline Reservoir  
OSMonitorMonitorKeyboard
Windows 10 LG 34UC88-B 34" Ultrawide 3440x1440 75Hz HP ZR2240w IPS WASD CODE 87-Key [MX Clear + PBT Keycaps] 
PowerCaseMouseAudio
Seasonix X-750 Case Labs Mercury S3 Logitech G502 Sennheiser HD 598 SE 
Audio
Micca OriGen 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel i5 3570K [Delid] Asrock Z77E-ITX XFX Radeon R9 Fury X G.SKILL 2133MHz 8GB DDR3 
Hard DriveHard DriveHard DriveHard Drive
Crucial M4 256GB Silicon Power S60 120GB Western Digital Blue Scorpio 1TB Seagate Constellation 2 1TB 
CoolingCoolingCoolingCooling
Swiftech Apogee Drive II XSPC RX240+EX240 [Painted White] 5x 2150RPM Gentle Typhoons PWM [Painted Black+W... Bitspower Water Tank Z-Multi 80 Inline Reservoir  
OSMonitorMonitorKeyboard
Windows 10 LG 34UC88-B 34" Ultrawide 3440x1440 75Hz HP ZR2240w IPS WASD CODE 87-Key [MX Clear + PBT Keycaps] 
PowerCaseMouseAudio
Seasonix X-750 Case Labs Mercury S3 Logitech G502 Sennheiser HD 598 SE 
Audio
Micca OriGen 
  hide details  
Reply
post #18614 of 28303
Count me in.



Running as intake.

Pump is running at 100% all the time, with the fan set to ~1500rpm until the CPU gets over 50c, then it goes full ball.
post #18615 of 28303
Count me in x2



     
CPUMotherboardGraphicsRAM
Intel i7 3770k @ 4.5/1.26v ASUS Maximus Formula V XFX R290X 16GB CORSAIR DOMINATOR GT DDR3 2133Mhz 
Hard DriveOptical DriveCoolingCooling
x2 WD WD2500HHTZ, x2 WD WD5000HHTZ (Raid0), Sea... Samsung SH-222AB Corsair H100 Quad-Fan - CPU Corsair H80/H80 - 6990 
OSMonitorKeyboardPower
7 Ultimate x64 SP1 3x Samsung S27A750D in Eyefinity Microsoft Sidewinder X6 Corsair AX1200 
CaseMouseMouse PadAudio
Cooler Master Haf X (Temp Case) NZXT Avatar S (Black) Xtrac PADS RIPPER XXL Razer Megalodon/Maelstrom Audio Engine 7.1 
AudioAudioAudio
Sony CECHYA-0080 Wireless Headset/Onboard Realt... Harman/Kardon AVR 1600 - Sony SAVS-150H 7.1 Spe... Harman/Kardon 330A - Cinema Acoustics CSX-1200 ... 
CPUMotherboardGraphicsRAM
Intel C2D E6700 (Conroe) @ 3.6Ghz Intel D975XBX2 "Bad Axe 2" ATi Radeon X1950 Pro 4GB DualChan Corsair Dominator PC6400 @ 720Mhz 
Hard DriveOptical DriveCoolingOS
Old 130gb 5400rpm Seagate  SH22AB H60 Dual Fan Intake 
PowerCaseMouse Pad
Corsair TX750v2 NZXT Apollo None 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel i7 3770k @ 4.5/1.26v ASUS Maximus Formula V XFX R290X 16GB CORSAIR DOMINATOR GT DDR3 2133Mhz 
Hard DriveOptical DriveCoolingCooling
x2 WD WD2500HHTZ, x2 WD WD5000HHTZ (Raid0), Sea... Samsung SH-222AB Corsair H100 Quad-Fan - CPU Corsair H80/H80 - 6990 
OSMonitorKeyboardPower
7 Ultimate x64 SP1 3x Samsung S27A750D in Eyefinity Microsoft Sidewinder X6 Corsair AX1200 
CaseMouseMouse PadAudio
Cooler Master Haf X (Temp Case) NZXT Avatar S (Black) Xtrac PADS RIPPER XXL Razer Megalodon/Maelstrom Audio Engine 7.1 
AudioAudioAudio
Sony CECHYA-0080 Wireless Headset/Onboard Realt... Harman/Kardon AVR 1600 - Sony SAVS-150H 7.1 Spe... Harman/Kardon 330A - Cinema Acoustics CSX-1200 ... 
CPUMotherboardGraphicsRAM
Intel C2D E6700 (Conroe) @ 3.6Ghz Intel D975XBX2 "Bad Axe 2" ATi Radeon X1950 Pro 4GB DualChan Corsair Dominator PC6400 @ 720Mhz 
Hard DriveOptical DriveCoolingOS
Old 130gb 5400rpm Seagate  SH22AB H60 Dual Fan Intake 
PowerCaseMouse Pad
Corsair TX750v2 NZXT Apollo None 
  hide details  
Reply
post #18616 of 28303
Hey guys you have to go to the OP, scroll down to the base of the Google.doc and you can enter your setups using the link you find there.

~Ceadder
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #18617 of 28303
Ok So I have the H60 set up in my corsair 650D as an exhuast. Cpu is i7 920 but then idle temp is running at around 70c? That does not sound right to me at all. Anyone have any ideas on this?


Edited by cyang09 - 6/26/11 at 11:44pm
Corsair 700
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2700k 4.0ghz? AsRock Fatality Pro 1 z68 gen.3 None Corsair Vengence 1600 2x4gb 
Hard DriveOptical DriveOSMonitor
1tb Seagate ASUS DVD-RW Windows 7 Ultimate 64-bit LG 2260V 23" 
KeyboardPowerCaseMouse
Thermaltake Challenger Pro OCZ ModX 600w Corsair 700D Sidewinder x8 
  hide details  
Reply
Corsair 700
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2700k 4.0ghz? AsRock Fatality Pro 1 z68 gen.3 None Corsair Vengence 1600 2x4gb 
Hard DriveOptical DriveOSMonitor
1tb Seagate ASUS DVD-RW Windows 7 Ultimate 64-bit LG 2260V 23" 
KeyboardPowerCaseMouse
Thermaltake Challenger Pro OCZ ModX 600w Corsair 700D Sidewinder x8 
  hide details  
Reply
post #18618 of 28303
Quote:
Originally Posted by cyang09 View Post
Ok So I have the H60 set up in my corsair 650D as an exhuast. Cpu is i7 920 but then idle temp is running at around 70c? That does not sound right to me at all. Anyone have any ideas on this?

Try a reseat. Temps in the high 50s' sound about right 70c sounds like a reseat is in order.

~Ceadder
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #18619 of 28303
Quote:
Originally Posted by mav2000 View Post
Im here tooo. Please add me....just a quick question guys...how much tim is required for this setup to work optimally. I am using mx2 with the spread method, so a very thin layer...but looking at the copper plate and the finish on it, I would think more would be required.
Quote:
Originally Posted by Killhouse View Post
I tried applying the MX2 a few times before I was happy. I ended up putting 5 small dots on the chip and then mounting H50. Seemed to give the best result (by observation), if you're not hitting stupid temperatures then you probably did it fine.
Wrong and wrong. Single BB sized dot on the CPU > Mount block. Spreading makes air bubbles.

Quote:
Originally Posted by cyang09 View Post
Ok So I have the H60 set up in my corsair 650D as an exhuast. Cpu is i7 920 but then idle temp is running at around 70c? That does not sound right to me at all. Anyone have any ideas on this?

Please get rid of the A-Power, it is junk. Trust me, I've had one.
post #18620 of 28303
Quote:
Originally Posted by linkin93 View Post
Wrong and wrong. Single BB sized dot on the CPU > Mount block. Spreading makes air bubbles.



Please get rid of the A-Power, it is junk. Trust me, I've had one.
Oh man, The picture is a whole new rig lol, that A-Power was thrown out a long time ago xD, need to update my specs after i finish modding my corsair 700D.
Corsair 700
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2700k 4.0ghz? AsRock Fatality Pro 1 z68 gen.3 None Corsair Vengence 1600 2x4gb 
Hard DriveOptical DriveOSMonitor
1tb Seagate ASUS DVD-RW Windows 7 Ultimate 64-bit LG 2260V 23" 
KeyboardPowerCaseMouse
Thermaltake Challenger Pro OCZ ModX 600w Corsair 700D Sidewinder x8 
  hide details  
Reply
Corsair 700
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel 2700k 4.0ghz? AsRock Fatality Pro 1 z68 gen.3 None Corsair Vengence 1600 2x4gb 
Hard DriveOptical DriveOSMonitor
1tb Seagate ASUS DVD-RW Windows 7 Ultimate 64-bit LG 2260V 23" 
KeyboardPowerCaseMouse
Thermaltake Challenger Pro OCZ ModX 600w Corsair 700D Sidewinder x8 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club