Originally Posted by Epsi
Made two quick 8 min. prime95 runs.
Dunno if the high speed test is 100% fair because i started it right after the medium speed test was finished.
I think the temps would have been a little lower if i mounted it like Corsair has shown.
Will try push/pull soon.
Fans at medium
Fans at high
Hey bud, I was wondering why all your core temps are exactly the same? (is that an AMD thing?)
"Dunno if the high speed test is 100% fair because i started it right after the medium speed test was finished."
That would be why your temps are higher with high speed than they are with medium speed.
I don't think 8 minutes is enough to give us the real story. You're not letting the CPU get as hot as it can. Using prime95 and Furmark I usually need at least a half hour for the temps to stabilize. You should run the test until the temps won't budge and are as high as they will go, then screenshot and click the button to increase the fan speed. You should see the temps decrease. After it is stable screenshot again. I bet 30 minutes at medium and then 15 minutes at high would do the job.
The most interesting thing would have been a comparison of the temps from your H70. It's too bad you didn't have a test before you switched to the H100.