Finally. The H100 have made it to Oz so I set about installing it in my CM 690. There where a couple of issues, since my case was not on the 'approved' list but thats what dremels are for
I wanted a top mounted rad and this is where the first issue arose. The fan ports on the the case do not match the fan / rad configuration of the H100, so there was some modding of the case to be had. Once done, it fitted nicely and I managed to put the rad in a P/P with the stock fan in push and some AP-15s in pull (intake).
The second issue came about when I tried to mount the pump. I was unable to mount the pump flush because there where some caps superior to the CPU that where in the way... by millimetres <grr>. This was solved by turning the pump 90 degrees. Now, everything was ready to rock and roll
The H100 was able to reduce my load temps by 3 - 9c across the cores. So Ive gone from high 70s to low 70s on IBT. Im happy with this. Its alot quieter too
Pics enclosed.Edited by Sethy666 - 9/4/11 at 3:42pm