Originally Posted by asus6983
Where do you find these screws? I've been to 4 hardware stores and 2 computer stores and none of them had a 6/32 screw that was 2.25 inches in length.
I made my own using 3" screws, two hex nuts and a pair of wire dykes.
Insert the screw into the hex nuts one at a time. Take them all the way down to the head of the screw. Then screw it into the opening and cinch down one of the nuts to snug. Then cinch down the 2nd one til its snug. Then at the head unthread the screw and mark just above the 2nd hex nut then lower both a little and mark again. Then snap the screw at that point and bring the hex nuts back to that point using the 2nd one to snug to.
I did this then painted mine to keep the hex nuts in place.