Originally Posted by xquisit
Do you guys think my CM R4 should be replace with some UK3000s?
I could replace my stock 2xintakes with these 2x CM R4s, and add the Ultra Kaze 3000's to my push/pull set up.
Picture with the LEDs off
Picture of my airflow:
I just want to add something to my post, because it seems I can't hit 4GHz stable.. and still don't know what the problem is..
Could it be TIM was added too much? Artic 7 was used, I believe that's what it was.
The person who applied the TIM:
1)put it on the CPU
2)scraped it flat with a business card
3)applied extra TIM on the card, to the H50
4)Computers been built for 1-2months, is there a break in period..or was too much added..or was the technique wrong? (He has a h50 as well, but this doesn't mean he is right about his actions)
Could it be there is too much bending in my tubes (I usually don't quote pictures, but in this case I want you to see 'em)?
Could it be my fans aren't efficient enough to move static pressure out of my case?
Should I purchase the Ultra Kaze 3000's, and add a fan shroud (or two)?
If you have experience with the 965BE or similar CPU, I can add specifics on what's going on.