Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 561

post #5601 of 28401
Ahhh, no, that doesnt seem right.
I know.. thats what I was saying too.. right now i reseated twice now.. with AS5
now at 3.2ghz it idles at 45-51 (i have two cores under 50 which is new)



Can you pls send a pic of your setup?


and yes I do close the door.. this was just after i finished reseating it for the 2nd time.

What is your room ambient?
I don't know it.. umm house heater is set for 72degrees.. and its cold enough that i have to wear a tshirt and a shirt on top..
its def. not hot..

Is the pump on right?
On the right? what do you mean?

What fan configuration are you using? Are your fan/s and pump set to 100%?
Im not sure where to set them to 100%
Thanks

also:



is it weird that i was getting same temps with TuniqTower120 on a worse case @ 3.2ghz ?
if thats the case im gonna return this one.. i was hoping for IDLING at least all cores under 50



** edit ***
Okay i remount it again.. and i put it with the cables on the right side... it didnt do much difference...
i remount it again.. in normal positino i had it before.. i put the cpufan (using speedfanprogram) to 100% and my temps are 47 45 51 51... so still about the same... dropped like 2deg.

*** edit again ***

its been 10 min on Prime 95... max temp 69 65 69 69

kinda weird.. i was getting pretty much almost same results maybe 2deg difference on Tuniq Tower... if it is at this rate.. i may return it.. not worth the 79.99 IMO.....
Edited by nickbunyun - 3/15/10 at 12:17am
I love brownies
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k ASUS Z77 Sabertooth ASUS 5850 8GB Corsair XMS3 
Hard DriveHard DriveHard DriveHard Drive
OCZ Agility 3 120GB WD Caviar Black WD Caviar Black WD 500GB@7200rpm 
Optical DriveCoolingOSMonitor
Cheap from newegg  CM Hyper 212 Evo Windows 7 Sceptre 24'' 
KeyboardPowerCaseMouse
Saitek Eclipse II Corsair GS600watt Antec 902 Razer DeathAdder 
Audio
Logitech G930 
  hide details  
Reply
I love brownies
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k ASUS Z77 Sabertooth ASUS 5850 8GB Corsair XMS3 
Hard DriveHard DriveHard DriveHard Drive
OCZ Agility 3 120GB WD Caviar Black WD Caviar Black WD 500GB@7200rpm 
Optical DriveCoolingOSMonitor
Cheap from newegg  CM Hyper 212 Evo Windows 7 Sceptre 24'' 
KeyboardPowerCaseMouse
Saitek Eclipse II Corsair GS600watt Antec 902 Razer DeathAdder 
Audio
Logitech G930 
  hide details  
Reply
post #5602 of 28401
Quote:
Originally Posted by pcnuttie View Post
Why are your temps are VERY HIGH? you overclocking or running stock?
I accidently closed OCCT when I captured the screen... so, yes, ovcing and testing how low the voltage will go at 3.0
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q8300 Asus P5Q Pro Turbo XFX 250 Corsair TWIN2X4096-8500C5D(4x1G) 
Hard DriveOptical DriveOSMonitor
2x WD5001AALS 2x LITE-ON iHAS424 Win 7 Home Premium 64 Dell 20" LCD 
KeyboardPowerCaseMouse
Microsoft Wireless 6000 V2 OCZ ModX 700W CM Stacker Microsoft Wireless Laser 6000 V2 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q8300 Asus P5Q Pro Turbo XFX 250 Corsair TWIN2X4096-8500C5D(4x1G) 
Hard DriveOptical DriveOSMonitor
2x WD5001AALS 2x LITE-ON iHAS424 Win 7 Home Premium 64 Dell 20" LCD 
KeyboardPowerCaseMouse
Microsoft Wireless 6000 V2 OCZ ModX 700W CM Stacker Microsoft Wireless Laser 6000 V2 
  hide details  
Reply
post #5603 of 28401
This isn't looking so good for my H50 lol. I just installed my old Scythe Kama Angle and paired it with my Ultrakaze3k and it seems to be doing better. This heatsink was like $30. Seems to be about 4C cooler. I will run more tests tomorrow and see how it stacks up. My room is really hot tonight for some reason. Sad thing is, in order to use the UK3K I had to put my ram side by side...

Pic of cooler:


Edited by sintricate - 3/15/10 at 2:39am
The SandBox
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-2600k (5.3GHz Max) ASUS Maximus IV GENE-Z GTX 980 Ti SC+ BP 16GB G.SKILL Sniper 1600MHz 1.25v 4x4GB 
Hard DriveCoolingOSMonitor
Samsung 850 Pro 256 Corsair H80 Windows 7 Ultimate 64bit Asus PA279Q 
PowerCase
SeaSonic X Series X650 Gold Silverstone FT03B 
  hide details  
Reply
The SandBox
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7-2600k (5.3GHz Max) ASUS Maximus IV GENE-Z GTX 980 Ti SC+ BP 16GB G.SKILL Sniper 1600MHz 1.25v 4x4GB 
Hard DriveCoolingOSMonitor
Samsung 850 Pro 256 Corsair H80 Windows 7 Ultimate 64bit Asus PA279Q 
PowerCase
SeaSonic X Series X650 Gold Silverstone FT03B 
  hide details  
Reply
post #5604 of 28401
hrm after i turned off hyperthreading and some other features my core temps are a lot lower and avg temperature on each core is closer to each other and not so spread apart.

is this pretty normal temperatures? im running push / pull with two gentle typhoons 1450's running prime95 with hypherthreading off



overclocked it to 3.8ghz
is it usually more beneficial to keep HT off?
Edited by whoisron - 3/15/10 at 2:47am
Storm Sniper
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 [3951A687] 4.01GHz@1.23v ASUS P6X58D Premium SAPPHIRE Vapor-X Radeon HD 5870 1GB Mushkin Enhanced Redline 6GB (3 x 2GB) 
Hard DriveOptical DriveOSMonitor
1xIntel X25-M 160GB G2 1xSAMSUNG Spinpoint F3 1TB Pioneer Black Internal Blu-ray Burner Windows 7 Ultimate 64-bit Dell UltraSharp U2711 
KeyboardPowerCaseMouse
Logitech Ultra-thin Illuminated CORSAIR CMPSU-850HX 850W CM Storm Sniper Logitech G9x 
Mouse Pad
steelseries SX 
  hide details  
Reply
Storm Sniper
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 [3951A687] 4.01GHz@1.23v ASUS P6X58D Premium SAPPHIRE Vapor-X Radeon HD 5870 1GB Mushkin Enhanced Redline 6GB (3 x 2GB) 
Hard DriveOptical DriveOSMonitor
1xIntel X25-M 160GB G2 1xSAMSUNG Spinpoint F3 1TB Pioneer Black Internal Blu-ray Burner Windows 7 Ultimate 64-bit Dell UltraSharp U2711 
KeyboardPowerCaseMouse
Logitech Ultra-thin Illuminated CORSAIR CMPSU-850HX 850W CM Storm Sniper Logitech G9x 
Mouse Pad
steelseries SX 
  hide details  
Reply
post #5605 of 28401
Quote:
Originally Posted by nickbunyun View Post
Ahhh, no, that doesnt seem right.
I know.. thats what I was saying too.. right now i reseated twice now.. with AS5
now at 3.2ghz it idles at 45-51 (i have two cores under 50 which is new)

Can you pls send a pic of your setup?


and yes I do close the door.. this was just after i finished reseating it for the 2nd time.

What is your room ambient?
I don't know it.. umm house heater is set for 72degrees.. and its cold enough that i have to wear a tshirt and a shirt on top..
its def. not hot..

Is the pump on right?
On the right? what do you mean?

What fan configuration are you using? Are your fan/s and pump set to 100%?
Im not sure where to set them to 100%
Thanks

is it weird that i was getting same temps with TuniqTower120 on a worse case @ 3.2ghz ?
if thats the case im gonna return this one.. i was hoping for IDLING at least all cores under 50

** edit ***
Okay i remount it again.. and i put it with the cables on the right side... it didnt do much difference...
i remount it again.. in normal positino i had it before.. i put the cpufan (using speedfanprogram) to 100% and my temps are 47 45 51 51... so still about the same... dropped like 2deg.

*** edit again ***

its been 10 min on Prime 95... max temp 69 65 69 69

kinda weird.. i was getting pretty much almost same results maybe 2deg difference on Tuniq Tower... if it is at this rate.. i may return it.. not worth the 79.99 IMO.....
Okay. I suspect the proximity of your graphics card may have something to do with it when the case is closed. 68c is hot.

I further suspect you have it set to intake, that is, your fan is sucking in air to your rad... is that correct?

Option: Move your rad to a fan port that isnt near a heat source, eg your rear exhaust port.

If you have reseated, then the pump is probably on correctly.

My other concern is your fan speed as indicted by your FANINO - I again suspect thats your pump, yes?.

Make sure it has 100% power. Either plug it directly into the PSU via a molex or make sure the header you have it plugged into is 12v and set to 100%.


In short... move your rad and make sure your pump is at 100% power - it should be running at @ 1400 + rpm and see how that goes
post #5606 of 28401
Since Autumn has arrived here (Fall, to our American friends), Ive decided to move my rad and fans to an intake configuration. PCSarge would be sooo proud

So, on with the show.

Setting up the bundle: Scythe Kaze 2000/Shroud/Rad/Shroud/Scythe Kaze 2000


Placement into the 5.25 bay: yeah, I cleaned the dust off that filter Gotta love zip ties...

Mobo looking clean and airy: I used Shin Etsu X23 TIM

All done and cool as ice... well nearly

Run a Linpack to see how we are travelling... happy camper


At room ambient 24c, thats a good 2c-4c difference in temps from my previous exhaust configuration.

Even better news, when I fold, my CPU temps stay down because the heat generated from my GPU isnt getting sucked through the rad

I love this cooler... one config for summer and other for winter... try doing that with air cooling





Edited by Sethy666 - 3/15/10 at 4:23am
post #5607 of 28401
Nice work there Sethy666,

It also came to my mind putting the rad in the front of my HAF 932 as I think my high temps may be due to my HD5970's heat going into the RAD.

With those green plastics ( Sorry don't know name in english ), does it hold fine and what about vibration, any loud noise?
    
CPUMotherboardGraphicsRAM
Intel Core i7 8700k ASUS Maximus X Hero MSI GTX 1080 Ti Gaming X TRIO 16GB Corsair Vengeance RGB 3466MHz CL16 
Hard DriveHard DriveHard DriveHard Drive
Samsung 960 PRO M.2 512GB WD Red 4TB WD Green 1TB WD Blue 1TB 
CoolingOSMonitorKeyboard
Corsair H115i Extreme Windows 10 PRO ASUS ROG Swift PG279Q Ducky Shine 6 (MX Brown) 
PowerCaseMouseMouse Pad
EVGA Supernova T2 850W Phanteks Enthoo Luxe Logitech G900 Chaos Spectrum Razer Destructor 2 
AudioAudioAudio
Beyerdynamic DT-770 PRO 80ohm JDS O2+ODAC Zalman MIC-M1 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 8700k ASUS Maximus X Hero MSI GTX 1080 Ti Gaming X TRIO 16GB Corsair Vengeance RGB 3466MHz CL16 
Hard DriveHard DriveHard DriveHard Drive
Samsung 960 PRO M.2 512GB WD Red 4TB WD Green 1TB WD Blue 1TB 
CoolingOSMonitorKeyboard
Corsair H115i Extreme Windows 10 PRO ASUS ROG Swift PG279Q Ducky Shine 6 (MX Brown) 
PowerCaseMouseMouse Pad
EVGA Supernova T2 850W Phanteks Enthoo Luxe Logitech G900 Chaos Spectrum Razer Destructor 2 
AudioAudioAudio
Beyerdynamic DT-770 PRO 80ohm JDS O2+ODAC Zalman MIC-M1 
  hide details  
Reply
post #5608 of 28401
Quote:
Originally Posted by kcuestag View Post
Nice work there Sethy666,

It also came to my mind putting the rad in the front of my HAF 932 as I think my high temps may be due to my HD5970's heat going into the RAD.

With those green plastics ( Sorry don't know name in english ), does it hold fine and what about vibration, any loud noise?
Your english is fine.

Zip-ties - a modders best friend

No excessive noise or vibration. You'll note I have also placed foam rubber on the base to absorb any vibration.

With my AC GTX Pro GPU cooler, my GPU no longer exhaust out the back... most of it goes into the case, even with my lil fan mod (see pic). Its the first time Ive seen sub 30c temps on my CPU... Im thrilled with this 1 hour job.
post #5609 of 28401
Quote:
Originally Posted by Sethy666 View Post
Your english is fine.

Zip-ties - a modders best friend

No excessive noise or vibration. You'll note I have also placed foam rubber on the base to absorb any vibration.

With my AC GTX Pro GPU cooler, my GPU no longer exhaust out the back... most of it goes into the case, even with my lil fan mod (see pic). Its the first time Ive seen sub 30c temps on my CPU... Im thrilled with this 1 hour job.
Oh Zip-ties

I need to buy some of those, I ran short yesterday using them for a fan on the DVD bays and another in the CPU Block to cool it a bit more.

Do you think moving the rad to the front of the case will lower temps considerably? My temps right now are 38ºC iddle and like 50ºC full :/ I expected it a bit cooler, and it might be due to my HD5970's heat exhausting off the case and going up into the radiator , not sure.
    
CPUMotherboardGraphicsRAM
Intel Core i7 8700k ASUS Maximus X Hero MSI GTX 1080 Ti Gaming X TRIO 16GB Corsair Vengeance RGB 3466MHz CL16 
Hard DriveHard DriveHard DriveHard Drive
Samsung 960 PRO M.2 512GB WD Red 4TB WD Green 1TB WD Blue 1TB 
CoolingOSMonitorKeyboard
Corsair H115i Extreme Windows 10 PRO ASUS ROG Swift PG279Q Ducky Shine 6 (MX Brown) 
PowerCaseMouseMouse Pad
EVGA Supernova T2 850W Phanteks Enthoo Luxe Logitech G900 Chaos Spectrum Razer Destructor 2 
AudioAudioAudio
Beyerdynamic DT-770 PRO 80ohm JDS O2+ODAC Zalman MIC-M1 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 8700k ASUS Maximus X Hero MSI GTX 1080 Ti Gaming X TRIO 16GB Corsair Vengeance RGB 3466MHz CL16 
Hard DriveHard DriveHard DriveHard Drive
Samsung 960 PRO M.2 512GB WD Red 4TB WD Green 1TB WD Blue 1TB 
CoolingOSMonitorKeyboard
Corsair H115i Extreme Windows 10 PRO ASUS ROG Swift PG279Q Ducky Shine 6 (MX Brown) 
PowerCaseMouseMouse Pad
EVGA Supernova T2 850W Phanteks Enthoo Luxe Logitech G900 Chaos Spectrum Razer Destructor 2 
AudioAudioAudio
Beyerdynamic DT-770 PRO 80ohm JDS O2+ODAC Zalman MIC-M1 
  hide details  
Reply
post #5610 of 28401
thats sick looking sethy,
B&W
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1700 ASUS ROG CROSSHAIR VI HERO (WI-FI AC) Nvidia GeForce GTX 1080 G.SKILL TridentZ RGB Series 16GB (2 x 8GB) 288-... 
Hard DriveCoolingOSMonitor
Samsung 850 EVO 500GB SSD (OS)// OCZ Vertex 4 1... EK Water blocks P280 Water Cooling Kit Windows 10 64 Bit Home Edition Samsung 40" LED 4K TV 
PowerCase
EVGA SuperNOVA 1000 G2 120-G2 Corsair Obsidian 900D 
  hide details  
Reply
B&W
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 7 1700 ASUS ROG CROSSHAIR VI HERO (WI-FI AC) Nvidia GeForce GTX 1080 G.SKILL TridentZ RGB Series 16GB (2 x 8GB) 288-... 
Hard DriveCoolingOSMonitor
Samsung 850 EVO 500GB SSD (OS)// OCZ Vertex 4 1... EK Water blocks P280 Water Cooling Kit Windows 10 64 Bit Home Edition Samsung 40" LED 4K TV 
PowerCase
EVGA SuperNOVA 1000 G2 120-G2 Corsair Obsidian 900D 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club