Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 891

post #8901 of 28252
Well in this club you have approximately 890 posts at the moment. So if you get started now, I'm sure by this time Monday you'll have stumbled across some Antec owners with it mounted in the drive bays.

I'm j/k of course.

But I will say that if you have flow(HAF 932 has flow through the drivebays so...) then I see no reason not to mount your H50 up front, regardless of what everyone else is doing. Be a trendsetter. If you aren't setting the trend you're at least taking steps to flow cool air into your H50 and that is ALWAYS a good thing.

~Ceadder

Quote:
Originally Posted by Divine_Madcat View Post
Just curious - have any Antec Nine Hundred II users tried mounting this bad boy in one of the HDD bays (which nicely have the 120mm fan mounts). I suspect part of my heat problems are related to my PSU and GPU exhausting out back (and my top fan dumping heat all around), which even my intake setup cannot overcome.

But, if i could mount it in the front, it might get much cooler air, and may be cooler in general. I know others have front mounted their H50's, but I am not sure if i have seen antec users do so.
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #8902 of 28252
Quote:
Originally Posted by Ceadderman View Post
Well in this club you have approximately 890 posts at the moment. So if you get started now, I'm sure by this time Monday you'll have stumbled across some Antec owners with it mounted in the drive bays.

I'm j/k of course.

But I will say that if you have flow(HAF 932 has flow through the drivebays so...) then I see no reason not to mount your H50 up front, regardless of what everyone else is doing. Be a trendsetter. If you aren't setting the trend you're at least taking steps to flow cool air into your H50 and that is ALWAYS a good thing.

~Ceadder
The funny thing is, after refining my search a bit, I think I did find some info:
http://www.overclock.net/water-cooli...ml#post8587673
Its an Antec 1200, but the 902 is the same sans 3 drive bays.. So with that in mind, I think I am going to try to jury rig something. I mean hey.. it cane be any worse than my current 40*C idle/58*C load temps.
Photochopper
(13 items)
 
Asus G73
(5 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II 955 C3 [3.8Ghz @1.45v, 2800NB @1.35] GIGABYTE GA-MA790XT-UD4P Zotac GTX 460 1GB 12GB Mixed [1333, 9-9-9-20-33-1T @ 1.6V] 
Hard DriveOSMonitorKeyboard
2x Hitatchi 1TB 7k1000.c, 1x 500GB WD Green Win 7 Professional x64 Dell U2211H Logitech G15 
PowerCaseMouseMouse Pad
PC Power & Cooling 750 Silencer Antec 1200 Logitech MX Revolution, Wacom Pen & Touch Func 1030 
CPUGraphicsHard DriveHard Drive
Intel i7 740QM ATI 5870 Mobile Sandisk Extreme SSD Toshiba 
OS
Windows 7 Ultimate 
  hide details  
Reply
Photochopper
(13 items)
 
Asus G73
(5 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II 955 C3 [3.8Ghz @1.45v, 2800NB @1.35] GIGABYTE GA-MA790XT-UD4P Zotac GTX 460 1GB 12GB Mixed [1333, 9-9-9-20-33-1T @ 1.6V] 
Hard DriveOSMonitorKeyboard
2x Hitatchi 1TB 7k1000.c, 1x 500GB WD Green Win 7 Professional x64 Dell U2211H Logitech G15 
PowerCaseMouseMouse Pad
PC Power & Cooling 750 Silencer Antec 1200 Logitech MX Revolution, Wacom Pen & Touch Func 1030 
CPUGraphicsHard DriveHard Drive
Intel i7 740QM ATI 5870 Mobile Sandisk Extreme SSD Toshiba 
OS
Windows 7 Ultimate 
  hide details  
Reply
post #8903 of 28252
Nope can't be any worse that's for certain.

~Ceadder

Quote:
Originally Posted by Divine_Madcat View Post
The funny thing is, after refining my search a bit, I think I did find some info:
http://www.overclock.net/water-cooli...ml#post8587673
Its an Antec 1200, but the 902 is the same sans 3 drive bays.. So with that in mind, I think I am going to try to jury rig something. I mean hey.. it cane be any worse than my current 40*C idle/58*C load temps.
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #8904 of 28252
Quote:
Originally Posted by Ceadderman View Post
Nope can't be any worse that's for certain.

~Ceadder
This.

I must say this week I had the H50 mounted on the rear part exhausting air.

But then I decided to move HAF 932 to the floor because it is more comfortable and I have more space, and then I realised that in the back of the case, there was a lot of heat.

I decided to put the H50 back on the Drive bays with some zip-ties as intake (I installed a fan filter on the first fan Just don't want dust! ) and I gained 4ºC iddle and almost 7ºC on load

So deffinitly, put it in the front intaking fresh air, like I did.
    
CPUMotherboardGraphicsGraphics
Intel Core i7 7700k ASUS Maximus IX Formula EVGA GTX1080 Ti *soon* EVGA GTX1080 Ti *soon* 
RAMHard DriveHard DriveHard Drive
16GB Corsair Dominator Platinum 2666MHz CL16 Samsung 950 PRO M.2 512GB WD Red 4TB WD Green 1TB 
CoolingOSMonitorKeyboard
Corsair H110i GT Windows 10 PRO ASUS ROG Swift PG279Q Corsair K70 RGB MX Brown 
PowerCaseMouseMouse Pad
EVGA Supernova T2 850W Phanteks Enthoo Luxe Logitech G900 Chaos Spectrum Razer Destructor 2 
AudioAudioAudio
Beyerdynamic DT-770 PRO 80ohm JDS O2+ODAC Zalman MIC-M1 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Intel Core i7 7700k ASUS Maximus IX Formula EVGA GTX1080 Ti *soon* EVGA GTX1080 Ti *soon* 
RAMHard DriveHard DriveHard Drive
16GB Corsair Dominator Platinum 2666MHz CL16 Samsung 950 PRO M.2 512GB WD Red 4TB WD Green 1TB 
CoolingOSMonitorKeyboard
Corsair H110i GT Windows 10 PRO ASUS ROG Swift PG279Q Corsair K70 RGB MX Brown 
PowerCaseMouseMouse Pad
EVGA Supernova T2 850W Phanteks Enthoo Luxe Logitech G900 Chaos Spectrum Razer Destructor 2 
AudioAudioAudio
Beyerdynamic DT-770 PRO 80ohm JDS O2+ODAC Zalman MIC-M1 
  hide details  
Reply
post #8905 of 28252
Well see, that's why I'm going to mount it on the ceiling under the I/O panel. It should have plenty of cool airflow entering the front of the 932. Even with the fans set to exhaust. Sure I may get SOME heat transfer from the 5970 but it's hardly anything to get worked up about. If I have to I can always fabricate an intake tube and fix it to the bottom of the pusher fan.

~Ceadder

Quote:
Originally Posted by kcuestag View Post
This.

I must say this week I had the H50 mounted on the rear part exhausting air.

But then I decided to move HAF 932 to the floor because it is more comfortable and I have more space, and then I realised that in the back of the case, there was a lot of heat.

I decided to put the H50 back on the Drive bays with some zip-ties as intake (I installed a fan filter on the first fan Just don't want dust! ) and I gained 4ºC iddle and almost 7ºC on load

So deffinitly, put it in the front intaking fresh air, like I did.
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #8906 of 28252
I don't wanna cut my rear exhaust fan hole lol. I rather leave it alone. Sure i can do some modding but if i could find another Antec 1200 then i'd do it but it doesn't bother me. The temps are fine. I am just picky i guess. I like it MUCH lower. At load it only gets at 35 or lower and idle is less. So it's fine. I'm only at 3ghz anyways. I know i have room to go maybe 4ghz but i'm nervous because i never done higher clocks and i don't wanna have to re-adjust everything in bios lol. I might when the time comes. I hope i don't kill my motherboard lol.
Antec 1200
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q9400 @ 3ghz Asus P5N-D EVGA GTS 250 512mb/XFX GTS 250 SLi 4GB /OCZ DDR2 PC2-6400 Reaper HPC 4GB Edition 
Hard DriveOptical DriveOSMonitor
Western Digital Green 500gb DVD/RW combo Lightscribe Windows 7 Ultimate 64bit Acer 1680x1050 22' Res 60hz 
KeyboardPowerCaseMouse
Razer Lysco Keyboard Apevia 680 watts Antec 1200 G5 logitech 
Mouse Pad
RocketPad 
  hide details  
Reply
Antec 1200
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q9400 @ 3ghz Asus P5N-D EVGA GTS 250 512mb/XFX GTS 250 SLi 4GB /OCZ DDR2 PC2-6400 Reaper HPC 4GB Edition 
Hard DriveOptical DriveOSMonitor
Western Digital Green 500gb DVD/RW combo Lightscribe Windows 7 Ultimate 64bit Acer 1680x1050 22' Res 60hz 
KeyboardPowerCaseMouse
Razer Lysco Keyboard Apevia 680 watts Antec 1200 G5 logitech 
Mouse Pad
RocketPad 
  hide details  
Reply
post #8907 of 28252
Quote:
Originally Posted by Ceadderman View Post
Well see, that's why I'm going to mount it on the ceiling under the I/O panel. It should have plenty of cool airflow entering the front of the 932. Even with the fans set to exhaust. Sure I may get SOME heat transfer from the 5970 but it's hardly anything to get worked up about. If I have to I can always fabricate an intake tube and fix it to the bottom of the pusher fan.

~Ceadder
How can I put mine below the I/O panel O.o ? I don't see how to take the upper part plastic (Where the on/reset buttons are) :/
    
CPUMotherboardGraphicsGraphics
Intel Core i7 7700k ASUS Maximus IX Formula EVGA GTX1080 Ti *soon* EVGA GTX1080 Ti *soon* 
RAMHard DriveHard DriveHard Drive
16GB Corsair Dominator Platinum 2666MHz CL16 Samsung 950 PRO M.2 512GB WD Red 4TB WD Green 1TB 
CoolingOSMonitorKeyboard
Corsair H110i GT Windows 10 PRO ASUS ROG Swift PG279Q Corsair K70 RGB MX Brown 
PowerCaseMouseMouse Pad
EVGA Supernova T2 850W Phanteks Enthoo Luxe Logitech G900 Chaos Spectrum Razer Destructor 2 
AudioAudioAudio
Beyerdynamic DT-770 PRO 80ohm JDS O2+ODAC Zalman MIC-M1 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Intel Core i7 7700k ASUS Maximus IX Formula EVGA GTX1080 Ti *soon* EVGA GTX1080 Ti *soon* 
RAMHard DriveHard DriveHard Drive
16GB Corsair Dominator Platinum 2666MHz CL16 Samsung 950 PRO M.2 512GB WD Red 4TB WD Green 1TB 
CoolingOSMonitorKeyboard
Corsair H110i GT Windows 10 PRO ASUS ROG Swift PG279Q Corsair K70 RGB MX Brown 
PowerCaseMouseMouse Pad
EVGA Supernova T2 850W Phanteks Enthoo Luxe Logitech G900 Chaos Spectrum Razer Destructor 2 
AudioAudioAudio
Beyerdynamic DT-770 PRO 80ohm JDS O2+ODAC Zalman MIC-M1 
  hide details  
Reply
post #8908 of 28252
What do you guys think of this fan? I just wanna get something better.

http://www.frozencpu.com/products/58...l=g36c435s1104
or

http://www.frozencpu.com/products/64...435s1104#blank


Besides the Corsair fan. I remember reading somewhere else someone mentioned it's better to have a fast fan with higher cfm to pull as exhaust on the rad and a lower cfm fan to push it in? True? I don't think it matters but i do know i rather have a higher CFM pull in rad fan to replace my RAD cuz my cfm is still good on my antec tri fans anyways since it runs higher on high settings anyways. It runs from 79cfm if i am correct. but anyways just wanted to see what you guys think. I do have a Master Cooler fan on my side panel that runs 90cfm and it does cool everything inside my case. I wanna at least have 1 more stronger cfm fan so i can get much cooler air and better flow to escape through the RAD since it's sitting above those video cards. The cooler the better I am a temp freak i admit that.
Antec 1200
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q9400 @ 3ghz Asus P5N-D EVGA GTS 250 512mb/XFX GTS 250 SLi 4GB /OCZ DDR2 PC2-6400 Reaper HPC 4GB Edition 
Hard DriveOptical DriveOSMonitor
Western Digital Green 500gb DVD/RW combo Lightscribe Windows 7 Ultimate 64bit Acer 1680x1050 22' Res 60hz 
KeyboardPowerCaseMouse
Razer Lysco Keyboard Apevia 680 watts Antec 1200 G5 logitech 
Mouse Pad
RocketPad 
  hide details  
Reply
Antec 1200
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q9400 @ 3ghz Asus P5N-D EVGA GTS 250 512mb/XFX GTS 250 SLi 4GB /OCZ DDR2 PC2-6400 Reaper HPC 4GB Edition 
Hard DriveOptical DriveOSMonitor
Western Digital Green 500gb DVD/RW combo Lightscribe Windows 7 Ultimate 64bit Acer 1680x1050 22' Res 60hz 
KeyboardPowerCaseMouse
Razer Lysco Keyboard Apevia 680 watts Antec 1200 G5 logitech 
Mouse Pad
RocketPad 
  hide details  
Reply
post #8909 of 28252
Quote:
Originally Posted by kcuestag View Post
This.

I must say this week I had the H50 mounted on the rear part exhausting air.

But then I decided to move HAF 932 to the floor because it is more comfortable and I have more space, and then I realised that in the back of the case, there was a lot of heat.

I decided to put the H50 back on the Drive bays with some zip-ties as intake (I installed a fan filter on the first fan Just don't want dust! ) and I gained 4ºC iddle and almost 7ºC on load

So deffinitly, put it in the front intaking fresh air, like I did.
I wont get my hopes up too high, but 7C on load might almost be enough to get me to 4Ghz (i think I am stuck on 3.8Ghz because of heat).

Now, based off of memory of tubing length, what will happen is something like this:

Code:
(end of drive bay)                  (front of case)
 |                                               |
[<--- FAN [H50] {Shroud} FAN <-----------------Fan]

So, it will sort of be a small wind tunnel. Anyone see any problems with this? All of the fans are within 15CFM of each other..
Photochopper
(13 items)
 
Asus G73
(5 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II 955 C3 [3.8Ghz @1.45v, 2800NB @1.35] GIGABYTE GA-MA790XT-UD4P Zotac GTX 460 1GB 12GB Mixed [1333, 9-9-9-20-33-1T @ 1.6V] 
Hard DriveOSMonitorKeyboard
2x Hitatchi 1TB 7k1000.c, 1x 500GB WD Green Win 7 Professional x64 Dell U2211H Logitech G15 
PowerCaseMouseMouse Pad
PC Power & Cooling 750 Silencer Antec 1200 Logitech MX Revolution, Wacom Pen & Touch Func 1030 
CPUGraphicsHard DriveHard Drive
Intel i7 740QM ATI 5870 Mobile Sandisk Extreme SSD Toshiba 
OS
Windows 7 Ultimate 
  hide details  
Reply
Photochopper
(13 items)
 
Asus G73
(5 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II 955 C3 [3.8Ghz @1.45v, 2800NB @1.35] GIGABYTE GA-MA790XT-UD4P Zotac GTX 460 1GB 12GB Mixed [1333, 9-9-9-20-33-1T @ 1.6V] 
Hard DriveOSMonitorKeyboard
2x Hitatchi 1TB 7k1000.c, 1x 500GB WD Green Win 7 Professional x64 Dell U2211H Logitech G15 
PowerCaseMouseMouse Pad
PC Power & Cooling 750 Silencer Antec 1200 Logitech MX Revolution, Wacom Pen & Touch Func 1030 
CPUGraphicsHard DriveHard Drive
Intel i7 740QM ATI 5870 Mobile Sandisk Extreme SSD Toshiba 
OS
Windows 7 Ultimate 
  hide details  
Reply
post #8910 of 28252
Quote:
Originally Posted by Divine_Madcat View Post

Code:
(end of drive bay)                  (front of case)
 |                                               |
[<--- FAN [H50] {Shroud} FAN <-----------------Fan]

So, it will sort of be a small wind tunnel. Anyone see any problems with this? All of the fans are within 15CFM of each other..

Yep, that's how mine is mounted, at the "end of drive bays". It works fine (Since the tubes are not that long, don't think it is enough to put it at the start of the drive bays).

It'll be fine
    
CPUMotherboardGraphicsGraphics
Intel Core i7 7700k ASUS Maximus IX Formula EVGA GTX1080 Ti *soon* EVGA GTX1080 Ti *soon* 
RAMHard DriveHard DriveHard Drive
16GB Corsair Dominator Platinum 2666MHz CL16 Samsung 950 PRO M.2 512GB WD Red 4TB WD Green 1TB 
CoolingOSMonitorKeyboard
Corsair H110i GT Windows 10 PRO ASUS ROG Swift PG279Q Corsair K70 RGB MX Brown 
PowerCaseMouseMouse Pad
EVGA Supernova T2 850W Phanteks Enthoo Luxe Logitech G900 Chaos Spectrum Razer Destructor 2 
AudioAudioAudio
Beyerdynamic DT-770 PRO 80ohm JDS O2+ODAC Zalman MIC-M1 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
Intel Core i7 7700k ASUS Maximus IX Formula EVGA GTX1080 Ti *soon* EVGA GTX1080 Ti *soon* 
RAMHard DriveHard DriveHard Drive
16GB Corsair Dominator Platinum 2666MHz CL16 Samsung 950 PRO M.2 512GB WD Red 4TB WD Green 1TB 
CoolingOSMonitorKeyboard
Corsair H110i GT Windows 10 PRO ASUS ROG Swift PG279Q Corsair K70 RGB MX Brown 
PowerCaseMouseMouse Pad
EVGA Supernova T2 850W Phanteks Enthoo Luxe Logitech G900 Chaos Spectrum Razer Destructor 2 
AudioAudioAudio
Beyerdynamic DT-770 PRO 80ohm JDS O2+ODAC Zalman MIC-M1 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club