No that's the stock H50 rad in its stock form. No holes into it other than what Corsair developed. You can just use their stock mounting screws for mounting in that location. The only difference is that you unbolt the I/O panel from the top of the 932 and that exposes 4 mounting holes for a 12cm fan.
I couldn't tell you the orientation of the fan however as that's not mine. It's what I will do with mine but that's Sintricate's rig. I'm assuming that he probably had it set up to intake. Personally I think that's fighting an uphill battle there as an intake since the I/O panel covers half the 12cm fan. Not alot of flow if you know what I mean. At least exhausting it won't make the fan work harder trying to pull air into the system. As far as adding pusher fan(in my case) I have to get longer screws to mount a gutted 12cm(shroud) and 12cm(pusher). There is absolutely no mod to that cooler that I'm aware of. Sintricate is a member of the 932/922 club and when I made mention of wondering if I could bolt there he posted the pic and said "like this?"
He's into full on h2o now I believe.
Originally Posted by pcnuttie
Did you screw the side of the rad? Isn't that what those holes are for? This is a nice idea! So you're just blowing fan down on it just to keep it cool anyways?