Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 934

post #9331 of 28311


current setup. 120x38mm panaflo intake. 120x25mm yate loon exhaust
 
FreeNAS Server
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 LGA2011 3960X  Asus Rampage IV Extreme Sapphire R9 290 + EK Nickle Plated Full Coverag... 32GB Samsung 30nm DDR3 1600 
Hard DriveHard DriveCoolingOS
Samsung SM951 NVMe w/ Angelwings PX-1 M.2 to PC... Samsung 850 EVO 500GB x2 RAID 0 EK Supremacy CPU Block + EK 360 XTX Rad Windows 7 Enterprise 
MonitorKeyboardPowerCase
LG 27UD68-P 27-Inch 4K UHD IPS Monitor with Fre... CM Storm Quickfire Pro Cooler Master SPH 1050W Lian Li PC-7F 
MouseAudioAudio
Razer DeathAdder Chroma Samson SR850 + Shure SE215 FocusRite 2i2 + Lepai LP-2020+ + Dayton Audio B652 
CPUCPUGraphicsRAM
Intel E5-2620 2.0 GHz 6-Core Intel E5-2620 2.0 GHz 6-Core AMD FirePro V5900 Samsung 64gb (16x4) ddr3 1333 pc3 10666 ECC  
Hard DriveHard DriveHard DriveOS
3 x 3TB Seagate HDD 2 x 4TB HGST NAS HDD 2 x 5 TB Western Digital HDD FreeNAS 9 
MonitorKeyboardPowerCase
Generic 22" Monitor HP Keyboard Stock HP Z820 850W PSU HP Z820 Case 
Mouse
HP Mouse 
  hide details  
Reply
 
FreeNAS Server
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 LGA2011 3960X  Asus Rampage IV Extreme Sapphire R9 290 + EK Nickle Plated Full Coverag... 32GB Samsung 30nm DDR3 1600 
Hard DriveHard DriveCoolingOS
Samsung SM951 NVMe w/ Angelwings PX-1 M.2 to PC... Samsung 850 EVO 500GB x2 RAID 0 EK Supremacy CPU Block + EK 360 XTX Rad Windows 7 Enterprise 
MonitorKeyboardPowerCase
LG 27UD68-P 27-Inch 4K UHD IPS Monitor with Fre... CM Storm Quickfire Pro Cooler Master SPH 1050W Lian Li PC-7F 
MouseAudioAudio
Razer DeathAdder Chroma Samson SR850 + Shure SE215 FocusRite 2i2 + Lepai LP-2020+ + Dayton Audio B652 
CPUCPUGraphicsRAM
Intel E5-2620 2.0 GHz 6-Core Intel E5-2620 2.0 GHz 6-Core AMD FirePro V5900 Samsung 64gb (16x4) ddr3 1333 pc3 10666 ECC  
Hard DriveHard DriveHard DriveOS
3 x 3TB Seagate HDD 2 x 4TB HGST NAS HDD 2 x 5 TB Western Digital HDD FreeNAS 9 
MonitorKeyboardPowerCase
Generic 22" Monitor HP Keyboard Stock HP Z820 850W PSU HP Z820 Case 
Mouse
HP Mouse 
  hide details  
Reply
post #9332 of 28311
Quote:
Originally Posted by iandroo888 View Post


current setup. 120x38mm panaflo intake. 120x25mm yate loon exhaust
Hello Ian,

What temps are you getting with that setup? Please also include ambient.
Never Happy!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 oc 4.0 Stable @ 1.37V Gigabyte EP45T-USB3P Two Diamond HD 6870 XOC in CrossFire 8GB Corsair XMS3 1600 
Hard DriveOptical DriveOSMonitor
WD Black 1Tb Liteon Windows 7 (64 bit) ASUS 24" HD & Samsung 20" 
KeyboardPowerCaseMouse
Razer Lycosa Mirror Antec 850 CM 690 Logitech G9x 
Mouse Pad
Razer Destructor 
  hide details  
Reply
Never Happy!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 oc 4.0 Stable @ 1.37V Gigabyte EP45T-USB3P Two Diamond HD 6870 XOC in CrossFire 8GB Corsair XMS3 1600 
Hard DriveOptical DriveOSMonitor
WD Black 1Tb Liteon Windows 7 (64 bit) ASUS 24" HD & Samsung 20" 
KeyboardPowerCaseMouse
Razer Lycosa Mirror Antec 850 CM 690 Logitech G9x 
Mouse Pad
Razer Destructor 
  hide details  
Reply
post #9333 of 28311
woot my temps droped today another 3C
wats this
(13 items)
 
  
CPUMotherboardGraphicsRAM
faster then an amd gigerbyte er gtfo internal good ramz 
Hard DriveOSMonitorPower
there hard ha! not mac shows nice pic big 
Case
afro engeneered 
  hide details  
Reply
wats this
(13 items)
 
  
CPUMotherboardGraphicsRAM
faster then an amd gigerbyte er gtfo internal good ramz 
Hard DriveOSMonitorPower
there hard ha! not mac shows nice pic big 
Case
afro engeneered 
  hide details  
Reply
post #9334 of 28311
Quote:
Originally Posted by Bal3Wolf View Post
Well i got this all hooked up with a push pull not real happy with temps so far getting it mounted right seems to be a big problem and im not sure its staying tight enugh. Linx is getting up to 70c with 4000mhz and 1.34 vcore on my q9550.
Bale is that 70C on #1 core or is that the avg? My 9550 has a f'd up core 1 that reads about 10C higher than the other 3. IF that is not the issue than I would say the mount is probably off a bit but then again you are oc'd to 4GHz.
Never Happy!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 oc 4.0 Stable @ 1.37V Gigabyte EP45T-USB3P Two Diamond HD 6870 XOC in CrossFire 8GB Corsair XMS3 1600 
Hard DriveOptical DriveOSMonitor
WD Black 1Tb Liteon Windows 7 (64 bit) ASUS 24" HD & Samsung 20" 
KeyboardPowerCaseMouse
Razer Lycosa Mirror Antec 850 CM 690 Logitech G9x 
Mouse Pad
Razer Destructor 
  hide details  
Reply
Never Happy!
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 oc 4.0 Stable @ 1.37V Gigabyte EP45T-USB3P Two Diamond HD 6870 XOC in CrossFire 8GB Corsair XMS3 1600 
Hard DriveOptical DriveOSMonitor
WD Black 1Tb Liteon Windows 7 (64 bit) ASUS 24" HD & Samsung 20" 
KeyboardPowerCaseMouse
Razer Lycosa Mirror Antec 850 CM 690 Logitech G9x 
Mouse Pad
Razer Destructor 
  hide details  
Reply
post #9335 of 28311
at 427.75 x 9 for 3.85GHz at 1.2375v. getting 53-56 degrees Load.

ambient according to this super old meat temp tester, its 75 F so like 24 C [fan and a/c on lol...]

seems kind of high. might reseat the block and use some AS5 or IC7 Diamond

hope this h50 will help me get thru desert hot temps xD
 
FreeNAS Server
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 LGA2011 3960X  Asus Rampage IV Extreme Sapphire R9 290 + EK Nickle Plated Full Coverag... 32GB Samsung 30nm DDR3 1600 
Hard DriveHard DriveCoolingOS
Samsung SM951 NVMe w/ Angelwings PX-1 M.2 to PC... Samsung 850 EVO 500GB x2 RAID 0 EK Supremacy CPU Block + EK 360 XTX Rad Windows 7 Enterprise 
MonitorKeyboardPowerCase
LG 27UD68-P 27-Inch 4K UHD IPS Monitor with Fre... CM Storm Quickfire Pro Cooler Master SPH 1050W Lian Li PC-7F 
MouseAudioAudio
Razer DeathAdder Chroma Samson SR850 + Shure SE215 FocusRite 2i2 + Lepai LP-2020+ + Dayton Audio B652 
CPUCPUGraphicsRAM
Intel E5-2620 2.0 GHz 6-Core Intel E5-2620 2.0 GHz 6-Core AMD FirePro V5900 Samsung 64gb (16x4) ddr3 1333 pc3 10666 ECC  
Hard DriveHard DriveHard DriveOS
3 x 3TB Seagate HDD 2 x 4TB HGST NAS HDD 2 x 5 TB Western Digital HDD FreeNAS 9 
MonitorKeyboardPowerCase
Generic 22" Monitor HP Keyboard Stock HP Z820 850W PSU HP Z820 Case 
Mouse
HP Mouse 
  hide details  
Reply
 
FreeNAS Server
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 LGA2011 3960X  Asus Rampage IV Extreme Sapphire R9 290 + EK Nickle Plated Full Coverag... 32GB Samsung 30nm DDR3 1600 
Hard DriveHard DriveCoolingOS
Samsung SM951 NVMe w/ Angelwings PX-1 M.2 to PC... Samsung 850 EVO 500GB x2 RAID 0 EK Supremacy CPU Block + EK 360 XTX Rad Windows 7 Enterprise 
MonitorKeyboardPowerCase
LG 27UD68-P 27-Inch 4K UHD IPS Monitor with Fre... CM Storm Quickfire Pro Cooler Master SPH 1050W Lian Li PC-7F 
MouseAudioAudio
Razer DeathAdder Chroma Samson SR850 + Shure SE215 FocusRite 2i2 + Lepai LP-2020+ + Dayton Audio B652 
CPUCPUGraphicsRAM
Intel E5-2620 2.0 GHz 6-Core Intel E5-2620 2.0 GHz 6-Core AMD FirePro V5900 Samsung 64gb (16x4) ddr3 1333 pc3 10666 ECC  
Hard DriveHard DriveHard DriveOS
3 x 3TB Seagate HDD 2 x 4TB HGST NAS HDD 2 x 5 TB Western Digital HDD FreeNAS 9 
MonitorKeyboardPowerCase
Generic 22" Monitor HP Keyboard Stock HP Z820 850W PSU HP Z820 Case 
Mouse
HP Mouse 
  hide details  
Reply
post #9336 of 28311
I'm really new to this whole overclocking world, I recently overclocked my Phenom II x4 940 BE to 3.6 ghz. It's being cooled by h50. I only touched the Multiplier and the Bus speed. I ran the EVEREST stability test just fine. I did have it up to 3.8 but it crashed within minutes. I have included some screen shots of my temps and the test. My question is are the numbers i'm getting my OC to decent and could I go higher safely by adjusting anything else. Any help would be great thanks.



My Current Toy
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X4 940 BE GA-MA790GP-UD4H Single ATI 4890 Kingston Hyper X 8gb DDR 2 PC8500 
OSMonitorKeyboardPower
Windows 7 64-bit LG 22" wide Logitech G15 Corsair 750w 
CaseMouse
HAF 932 Coolermaster Logitech G9 
  hide details  
Reply
My Current Toy
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II X4 940 BE GA-MA790GP-UD4H Single ATI 4890 Kingston Hyper X 8gb DDR 2 PC8500 
OSMonitorKeyboardPower
Windows 7 64-bit LG 22" wide Logitech G15 Corsair 750w 
CaseMouse
HAF 932 Coolermaster Logitech G9 
  hide details  
Reply
post #9337 of 28311
Greetings all. I'm new to this site but I've been building computers for a few years now. I recently picked up an H50 and I couldn't be happier with it. Idle temps dropped ~10c over stock HSF, although I'm running at near stock speeds. I did a short stress test of ~30min at 100% load and temps went to around 65c. I'll run it longer at a later date but so far so good.

The only things that caught my attention was when I was putting my side panel back on. I accidently hit one of the tubes and it made a noise similar to moving water. I know this sound is common when it starts up but is it common if I hit one of the tubes by accident? If it's a sealed unit, shouldn't there no air in there for this happen?

Also, is it ok to ziptie the hoses so they stay away from the side panel and the fan that is on it?

Cheers! -Jd

Here's a pic to along with it (cell phone):

http://img24.imageshack.us/img24/666...0529024138.jpg

Ignore the terrible cable management I would add a second fan to the radiator for a pull/push but the voltage heat sink is quite large and overlaps where the fan would be.
Edited by Jayyde - 5/28/10 at 11:51pm
post #9338 of 28311
Quote:
Originally Posted by Sinthus420 View Post
I'm really new to this whole overclocking world, I recently overclocked my Phenom II x4 940 BE to 3.6 ghz. It's being cooled by h50. I only touched the Multiplier and the Bus speed. I ran the EVEREST stability test just fine. I did have it up to 3.8 but it crashed within minutes. I have included some screen shots of my temps and the test. My question is are the numbers i'm getting my OC to decent and could I go higher safely by adjusting anything else. Any help would be great thanks.
8 gigs of memory ? I don't know for sure, but doesn't higher RAM make it harder to keep a stable overclock (like more stress on the mobo) ? If that's the case, maybe try it at 4GB. I could be wrong.

You should be at 3.8GHz easy, as I was able to do it without issues under stress. I tried 4GHz last night, but not stable, but I expected that anyway.

Quote:
Originally Posted by iandroo888 View Post
at 427.75 x 9 for 3.85GHz at 1.2375v. getting 53-56 degrees Load.

ambient according to this super old meat temp tester, its 75 F so like 24 C [fan and a/c on lol...]

seems kind of high. might reseat the block and use some AS5 or IC7 Diamond

hope this h50 will help me get thru desert hot temps xD
Exactly my thoughts and why I got one. Other than getting it on sale at a local Best Buy.
Edited by Nightz2k - 5/28/10 at 11:56pm
post #9339 of 28311
No, no no no no no no, sorry but that is myth. You NEED air in the system. Or you risk building pressure and popping the welds on the radiator. It may be a minor bit of air but it's required for the water displacement. If you look at an automotive cooling system you'll see that it requires air. This works on the same principle but without the cooling reservoir that cars require.

Somewhere on the Radiator their should be a bleed/fill plug. It my even be under the side covers. But there IS air in the system. In any case the best way (imho) is to always approach the system as if it had a 1:4 ratio of air:water.

It may not be enough to harm the system but when you're messing with tech that probably costs 5x as much as the cooler do you REALLY want to take the chance? I don't.

Sorry if I come off so heavy handed. Don't mean to be, just hope I can help people from ruining their nice and shiny H50s'.

~Ceadder

Quote:
Originally Posted by scottath View Post
its a fuly sealed system - thus i wouldnt think that there is much air in it at all.

in a "normal" WCing loop having the res at the top to get rid of air is needed - but in a sealed loop i dont think its that important.
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #9340 of 28311
hey u in vegas too ! lol which side? i picked up the last one on shelf on summerlin BB.

what temps are u getting? my temps are fluctuating from like 53 - 68 depending on which test Prime95 is on..

wonder if i should reseat and replace the TIM with like IC7 or something

oh so its a bad idea to have it mounted with the hoses on top? cuz my current setup with fan outside requires it mounted like that... otherwise i can only use two 120x25mm fans due to amt of space between rear panel and the pump/block

is there a difference in having pump plugged into cpu fan or other fan outputs? in bios, i have it set to all manual at 100%
Edited by iandroo888 - 5/29/10 at 12:08am
 
FreeNAS Server
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 LGA2011 3960X  Asus Rampage IV Extreme Sapphire R9 290 + EK Nickle Plated Full Coverag... 32GB Samsung 30nm DDR3 1600 
Hard DriveHard DriveCoolingOS
Samsung SM951 NVMe w/ Angelwings PX-1 M.2 to PC... Samsung 850 EVO 500GB x2 RAID 0 EK Supremacy CPU Block + EK 360 XTX Rad Windows 7 Enterprise 
MonitorKeyboardPowerCase
LG 27UD68-P 27-Inch 4K UHD IPS Monitor with Fre... CM Storm Quickfire Pro Cooler Master SPH 1050W Lian Li PC-7F 
MouseAudioAudio
Razer DeathAdder Chroma Samson SR850 + Shure SE215 FocusRite 2i2 + Lepai LP-2020+ + Dayton Audio B652 
CPUCPUGraphicsRAM
Intel E5-2620 2.0 GHz 6-Core Intel E5-2620 2.0 GHz 6-Core AMD FirePro V5900 Samsung 64gb (16x4) ddr3 1333 pc3 10666 ECC  
Hard DriveHard DriveHard DriveOS
3 x 3TB Seagate HDD 2 x 4TB HGST NAS HDD 2 x 5 TB Western Digital HDD FreeNAS 9 
MonitorKeyboardPowerCase
Generic 22" Monitor HP Keyboard Stock HP Z820 850W PSU HP Z820 Case 
Mouse
HP Mouse 
  hide details  
Reply
 
FreeNAS Server
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 LGA2011 3960X  Asus Rampage IV Extreme Sapphire R9 290 + EK Nickle Plated Full Coverag... 32GB Samsung 30nm DDR3 1600 
Hard DriveHard DriveCoolingOS
Samsung SM951 NVMe w/ Angelwings PX-1 M.2 to PC... Samsung 850 EVO 500GB x2 RAID 0 EK Supremacy CPU Block + EK 360 XTX Rad Windows 7 Enterprise 
MonitorKeyboardPowerCase
LG 27UD68-P 27-Inch 4K UHD IPS Monitor with Fre... CM Storm Quickfire Pro Cooler Master SPH 1050W Lian Li PC-7F 
MouseAudioAudio
Razer DeathAdder Chroma Samson SR850 + Shure SE215 FocusRite 2i2 + Lepai LP-2020+ + Dayton Audio B652 
CPUCPUGraphicsRAM
Intel E5-2620 2.0 GHz 6-Core Intel E5-2620 2.0 GHz 6-Core AMD FirePro V5900 Samsung 64gb (16x4) ddr3 1333 pc3 10666 ECC  
Hard DriveHard DriveHard DriveOS
3 x 3TB Seagate HDD 2 x 4TB HGST NAS HDD 2 x 5 TB Western Digital HDD FreeNAS 9 
MonitorKeyboardPowerCase
Generic 22" Monitor HP Keyboard Stock HP Z820 850W PSU HP Z820 Case 
Mouse
HP Mouse 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club