Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 971

post #9701 of 28300
My ambient temps are around 25C, and yes I've tried orienting the pump the other way. It's a really tight fit, as the hoses are so close. Should I do flip it back around? I've only had the pump right-side-up when the fittings were at the top.

My pump is operating at around 1400rpm too, according to everest and HWmonitor.
Swimmer's delight
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k ASUS P6X58D-E 7970 Corsair XM3 6GB 8-8-8-24 
Hard DriveOptical DriveOSMonitor
2x Samsung Spinpoint F3 1TB|Seagate 700GB Sony Optiarc Black Windows 7 Professional x64 Dell U2711|U2311H|26" Insignia TV 
PowerCaseMouseMouse Pad
Corsair HX750 Corsair 800D R.A.T. 7 Albino Razer Kabuto 
  hide details  
Reply
Swimmer's delight
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k ASUS P6X58D-E 7970 Corsair XM3 6GB 8-8-8-24 
Hard DriveOptical DriveOSMonitor
2x Samsung Spinpoint F3 1TB|Seagate 700GB Sony Optiarc Black Windows 7 Professional x64 Dell U2711|U2311H|26" Insignia TV 
PowerCaseMouseMouse Pad
Corsair HX750 Corsair 800D R.A.T. 7 Albino Razer Kabuto 
  hide details  
Reply
post #9702 of 28300
Quote:
Originally Posted by bfeng91 View Post
Okay, so I come hat in hand, looking for some sage advice. I've nearly read through all 970 of these pages and tried most everything.

My H50 is properly installed, no kinks, fittings on the bottom, in push/pull exhaust with 2 gentle typhoon 1850rpm's (they're not pointing towards each other for sure). Stock i7-920, no turboboost, still manages to get up to 60+C running Prime95 small fft. I've reseated this thing 4 times, using IC7, allowing 3 hours to cure. However, every time I reseat, the temps basically stay the same, hovering at around 60C. Help?
CPU Voltage: 1.225
DRAM Bus Voltage: 1.66
QPI/DRM Core Voltage: 1.35
This is my first reseat picture of how much IC7 was on there:
Here's a pic of the H50 - sorry for bad quality
60C isn't bad by far on a I7 chip if you see people posting lower temps specially in the 40's to 50's range those are probably AMD PII chips. It is safe to run I7's up to the 90C range so 60C sounds fine to me.
Main
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 Black Edition MSI NF750-G55 AM3 NVIDIA nForce 750a SLI EVGA 01G-P3-1158-TR GeForce GTS 250 1GB x 2 G.SKILL Ripjaws Series 8GB-1600 DDR3 
Hard DriveOptical DriveOSMonitor
Western Digital VelociRaptor WD6000HLHX 600GB Lite-On IHAS524 A Windows 7 Ultimate 64 bit Samsung 46" 1080p 240Hz LED-LCD HDTV UN46C7000 
KeyboardPowerCaseMouse
Logitech G15 Thermaltake W0319RU 850W Modular IN-WIN FANQUA Logitech G5 
  hide details  
Reply
Main
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 Black Edition MSI NF750-G55 AM3 NVIDIA nForce 750a SLI EVGA 01G-P3-1158-TR GeForce GTS 250 1GB x 2 G.SKILL Ripjaws Series 8GB-1600 DDR3 
Hard DriveOptical DriveOSMonitor
Western Digital VelociRaptor WD6000HLHX 600GB Lite-On IHAS524 A Windows 7 Ultimate 64 bit Samsung 46" 1080p 240Hz LED-LCD HDTV UN46C7000 
KeyboardPowerCaseMouse
Logitech G15 Thermaltake W0319RU 850W Modular IN-WIN FANQUA Logitech G5 
  hide details  
Reply
post #9703 of 28300
Two things.

First maybe putting your 140 back and moving your Rad to the top of the case or as an intake in the bays is better for you.

2nd exactly how long are you letting your system sit in the off position before firing it up.

IC7 is a (10-minute evaporation time, 2-hour curing recommended) TIM, in my information.

Also as has been frequently mentioned throughout this thread Ambients play a big part in overall temp.

Okay, 25c ambients. Leave your pump alone. Not the problem imho, unless it's defective. Try different spots for your Rad in both intake and exhaust. I'm assuming of course that you went Intake on the back and not Exhaust and I think that it played havoc with your static pressure.

~Ceadder



Quote:
Originally Posted by bfeng91 View Post
Okay, so I come hat in hand, looking for some sage advice. I've nearly read through all 970 of these pages and tried most everything.

My H50 is properly installed, no kinks, fittings on the bottom, in push/pull exhaust with 2 gentle typhoon 1850rpm's (they're not pointing towards each other for sure). Stock i7-920, no turboboost, still manages to get up to 60+C running Prime95 small fft. I've reseated this thing 4 times, using IC7, allowing 3 hours to cure. However, every time I reseat, the temps basically stay the same, hovering at around 60C. Help?

CPU Voltage: 1.225
DRAM Bus Voltage: 1.66
QPI/DRM Core Voltage: 1.35

This is my first reseat picture of how much IC7 was on there:


Here's a pic of the H50 - sorry for bad quality

Edited by Ceadderman - 6/6/10 at 12:12pm
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #9704 of 28300
It seems that the H50 and Thermaltake mid towers don't mix.

I was going to install it in this http://www.tigerdirect.com/applicati...044&CatId=1509

Unfortunately the radiator is taller than the rear fan so it won't fit. My only option is to try to mount it on the top but I can't fit the fan or radiator because the RAM clamps are in the way. So I ordered some Scythe slim fans. It may be possible to to do a push pull from the top.

It didn't work in my Thermaltake Wings RS because there are no holes in the back to mount a 120 mm fan. A 120 mm fan is actually mounted to an adapter.

So I have an $80 piece of hardware sitting around.

Both Thermaltake cases have systems running Black Edition AMDs. I don't mind replacing the Wings RS.

I only want to spend $50 on another case. There is no list of compatible or incompatible cases for the H50.

So this is the list http://www.tigerdirect.com/applicati...:1842|&Sort=4#

If anyone knows if these cases work let me know. I'm within driving distance of Tiger Direct. You will be doing me a great service.
DAW
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II x4 945 M2N-SLI 9500GT 6gb Crucial DDR 8000 
Hard DriveOptical DriveOSMonitor
Toshiba W7 x64 Acer 19 
PowerCase
Ultra 650w Thermaltake Soprano 101 
  hide details  
Reply
DAW
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II x4 945 M2N-SLI 9500GT 6gb Crucial DDR 8000 
Hard DriveOptical DriveOSMonitor
Toshiba W7 x64 Acer 19 
PowerCase
Ultra 650w Thermaltake Soprano 101 
  hide details  
Reply
post #9705 of 28300
Quote:
Originally Posted by Ceadderman View Post
Two things.

First maybe putting your 140 back and moving your Rad to the top of the case or as an intake in the bays is better for you.

2nd exactly how long are you letting your system sit in the off position before firing it up.

IC7 is a (10-minute evaporation time, 2-hour curing recommended) TIM, in my information.

Also as has been frequently mentioned throughout this thread Ambients play a big part in overall temp.

~Ceadder
I will try putting the 140 back/moving rad to the top later today.

My system stays in the off position for about 2 minutes - I'm assuming this should be longer? And I run prime95 and then look at temps in RealTemp.
Swimmer's delight
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k ASUS P6X58D-E 7970 Corsair XM3 6GB 8-8-8-24 
Hard DriveOptical DriveOSMonitor
2x Samsung Spinpoint F3 1TB|Seagate 700GB Sony Optiarc Black Windows 7 Professional x64 Dell U2711|U2311H|26" Insignia TV 
PowerCaseMouseMouse Pad
Corsair HX750 Corsair 800D R.A.T. 7 Albino Razer Kabuto 
  hide details  
Reply
Swimmer's delight
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k ASUS P6X58D-E 7970 Corsair XM3 6GB 8-8-8-24 
Hard DriveOptical DriveOSMonitor
2x Samsung Spinpoint F3 1TB|Seagate 700GB Sony Optiarc Black Windows 7 Professional x64 Dell U2711|U2311H|26" Insignia TV 
PowerCaseMouseMouse Pad
Corsair HX750 Corsair 800D R.A.T. 7 Albino Razer Kabuto 
  hide details  
Reply
post #9706 of 28300
Quote:
Originally Posted by kitekrazy View Post
It seems that the H50 and Thermaltake mid towers don't mix.

I was going to install it in this http://www.tigerdirect.com/applicati...044&CatId=1509

Unfortunately the radiator is taller than the rear fan so it won't fit. My only option is to try to mount it on the top but I can't fit the fan or radiator because the RAM clamps are in the way. So I ordered some Scythe slim fans. It may be possible to to do a push pull from the top.

It didn't work in my Thermaltake Wings RS because there are no holes in the back to mount a 120 mm fan. A 120 mm fan is actually mounted to an adapter.

So I have an $80 piece of hardware sitting around.

Both Thermaltake cases have systems running Black Edition AMDs. I don't mind replacing the Wings RS.

I only want to spend $50 on another case. There is no list of compatible or incompatible cases for the H50.

So this is the list http://www.tigerdirect.com/applicati...:1842|&Sort=4#

If anyone knows if these cases work let me know. I'm within driving distance of Tiger Direct. You will be doing me a great service.
mount the fan between the back panel of the case and the radiator. I couldnt mount the rad directly to the back of my 922. I had to sandwich the fan between the back and the rad, or use a shroud (you can also make a shroud from a 120mm fan if you dont have one)
 
Work Rig
(11 items)
 
 
CPUMotherboardGraphicsRAM
i7-2700k @ 4.5GHz  Asus P8Z68-V/Gen3 Asus GTX 1070 Strix OC G.Skill Ripjaws 16GB 
Hard DriveCoolingOSKeyboard
Crucial M4 128GB + 1TB F3 + Crucial M500 256GB Noctua NH-D15S Windows 10 Pro Cooler Master Novatouch TKL 
PowerCaseMouseMouse Pad
Cooler Master V1000 600T SE Roccat Kone XTD Steel Series 9HD 
CPUMotherboardGraphicsRAM
i7 950 Rampage III Gene 2x EVGA GTX 680 SLI 24gb HyperX 
Hard DriveCoolingOSMonitor
960GB Crucial M500 Intel Stock Windows 7 64bit Enterprise HP ZR2440w + Z24i 
KeyboardPowerCase
Ducky Brown Antec TP-750 Antec Sonata 
  hide details  
Reply
 
Work Rig
(11 items)
 
 
CPUMotherboardGraphicsRAM
i7-2700k @ 4.5GHz  Asus P8Z68-V/Gen3 Asus GTX 1070 Strix OC G.Skill Ripjaws 16GB 
Hard DriveCoolingOSKeyboard
Crucial M4 128GB + 1TB F3 + Crucial M500 256GB Noctua NH-D15S Windows 10 Pro Cooler Master Novatouch TKL 
PowerCaseMouseMouse Pad
Cooler Master V1000 600T SE Roccat Kone XTD Steel Series 9HD 
CPUMotherboardGraphicsRAM
i7 950 Rampage III Gene 2x EVGA GTX 680 SLI 24gb HyperX 
Hard DriveCoolingOSMonitor
960GB Crucial M500 Intel Stock Windows 7 64bit Enterprise HP ZR2440w + Z24i 
KeyboardPowerCase
Ducky Brown Antec TP-750 Antec Sonata 
  hide details  
Reply
post #9707 of 28300
Try this case...

NZXT BETA EVO Classic Series Mid-Tower Case

The 120mm grills are directly overhead of the CPU and should allow you to top mount the H50.

~Ceadder

Quote:
Originally Posted by kitekrazy View Post
It seems that the H50 and Thermaltake mid towers don't mix.

I was going to install it in this http://www.tigerdirect.com/applicati...044&CatId=1509

Unfortunately the radiator is taller than the rear fan so it won't fit. My only option is to try to mount it on the top but I can't fit the fan or radiator because the RAM clamps are in the way. So I ordered some Scythe slim fans. It may be possible to to do a push pull from the top.

It didn't work in my Thermaltake Wings RS because there are no holes in the back to mount a 120 mm fan. A 120 mm fan is actually mounted to an adapter.

So I have an $80 piece of hardware sitting around.

Both Thermaltake cases have systems running Black Edition AMDs. I don't mind replacing the Wings RS.

I only want to spend $50 on another case. There is no list of compatible or incompatible cases for the H50.

So this is the list http://www.tigerdirect.com/applicati...:1842|&Sort=4#

If anyone knows if these cases work let me know. I'm within driving distance of Tiger Direct. You will be doing me a great service.
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #9708 of 28300
Quote:
Originally Posted by bfeng91 View Post
Okay, so I come hat in hand, looking for some sage advice. I've nearly read through all 970 of these pages and tried most everything.

My H50 is properly installed, no kinks, fittings on the bottom, in push/pull exhaust with 2 gentle typhoon 1850rpm's (they're not pointing towards each other for sure). Stock i7-920, no turboboost, still manages to get up to 60+C running Prime95 small fft. I've reseated this thing 4 times, using IC7, allowing 3 hours to cure. However, every time I reseat, the temps basically stay the same, hovering at around 60C. Help?

CPU Voltage: 1.225
DRAM Bus Voltage: 1.66
QPI/DRM Core Voltage: 1.35

This is my first reseat picture of how much IC7 was on there:


Here's a pic of the H50 - sorry for bad quality
For some reason, (and this may be due to diff i7 chips) but your cpu voltage, (1.225) is alot higher than mine was at stock, I was on 1.144v and have been able to stay at that for my 3.66 overclock. Have you changed the voltage by mistake while setting up bios settings etc, perhaps it is indeed a little high for the stock clock of 2.66 thus resulting in higher temps.
just my 2 cents
    
CPUMotherboardGraphicsRAM
i7 920@ 4ghz 1.240v ASUS SABERTOOTH X58 XFX 5870 Patriot Viper 6GB@1603mhz 8-8-8-24-88 1T 
Hard DriveCoolingOSMonitor
120G OCZ VERTEX 2E/750G WD CAV BLACK/1TB EX WD ELE H50 Front P/P intake 2x San ACE H1011 Windows 7 Home 64bit LG 24" Flatron 1920x1080 
PowerCaseMouseMouse Pad
NorthQ Black magic 850w Modular quad sli HAF 932 Deathadder 2013 - Razer copperhead - SS Kana - ... QcK+ / Cyber sniper 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 920@ 4ghz 1.240v ASUS SABERTOOTH X58 XFX 5870 Patriot Viper 6GB@1603mhz 8-8-8-24-88 1T 
Hard DriveCoolingOSMonitor
120G OCZ VERTEX 2E/750G WD CAV BLACK/1TB EX WD ELE H50 Front P/P intake 2x San ACE H1011 Windows 7 Home 64bit LG 24" Flatron 1920x1080 
PowerCaseMouseMouse Pad
NorthQ Black magic 850w Modular quad sli HAF 932 Deathadder 2013 - Razer copperhead - SS Kana - ... QcK+ / Cyber sniper 
  hide details  
Reply
post #9709 of 28300
I would let the system set for the 2 hour time and then fire it up as normal and go 2 more hours to see what that gets for temps.

~Ceadder

Quote:
Originally Posted by bfeng91 View Post
I will try putting the 140 back/moving rad to the top later today.

My system stays in the off position for about 2 minutes - I'm assuming this should be longer? And I run prime95 and then look at temps in RealTemp.
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #9710 of 28300
Quote:
Originally Posted by R3aCt0r M|Nd View Post
For some reason, (and this may be due to diff i7 chips) but your cpu voltage, (1.225) is alot higher than mine was at stock, I was on 1.144v and have been able to stay at that for my 3.66 overclock. Have you changed the voltage by mistake while setting up bios settings etc, perhaps it is indeed a little high for the stock clock of 2.66 thus resulting in higher temps.
just my 2 cents
No, I didn't tweak anything in the BIOS except to turn SpeedStep off and to make sure my pump was running at 100% power. I'll try undervolting it perhaps?
Swimmer's delight
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k ASUS P6X58D-E 7970 Corsair XM3 6GB 8-8-8-24 
Hard DriveOptical DriveOSMonitor
2x Samsung Spinpoint F3 1TB|Seagate 700GB Sony Optiarc Black Windows 7 Professional x64 Dell U2711|U2311H|26" Insignia TV 
PowerCaseMouseMouse Pad
Corsair HX750 Corsair 800D R.A.T. 7 Albino Razer Kabuto 
  hide details  
Reply
Swimmer's delight
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k ASUS P6X58D-E 7970 Corsair XM3 6GB 8-8-8-24 
Hard DriveOptical DriveOSMonitor
2x Samsung Spinpoint F3 1TB|Seagate 700GB Sony Optiarc Black Windows 7 Professional x64 Dell U2711|U2311H|26" Insignia TV 
PowerCaseMouseMouse Pad
Corsair HX750 Corsair 800D R.A.T. 7 Albino Razer Kabuto 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club