Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 991

post #9901 of 28303
its been along time since i have been on here
my h50 is still cooling as well as it did the first day
    
CPUMotherboardGraphicsRAM
Intel q8400 GA-EP45-UD3P(rev1.6 bio Fb for sli patch) evga 9800 gtx+@830mhz SLI 4gb of Gskill DDR2@1066mhz(5,5,5,15) 
Hard DriveOptical DriveOSPower
wd 1tb LITEON 7 x64 sli patched. Corsair TX 750 watt 
Case
Antec 300 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel q8400 GA-EP45-UD3P(rev1.6 bio Fb for sli patch) evga 9800 gtx+@830mhz SLI 4gb of Gskill DDR2@1066mhz(5,5,5,15) 
Hard DriveOptical DriveOSPower
wd 1tb LITEON 7 x64 sli patched. Corsair TX 750 watt 
Case
Antec 300 
  hide details  
Reply
post #9902 of 28303
Quote:
Originally Posted by Ceadderman View Post
That's not true. It's truly dependant on the CFM of the Pusher you are using. The stock Corsair fan is roughly 50 CFM. My Yate Loon High Speed Silents are rated at 88 CFM. Now tell me, if I installed my fan and used a pre-made shroud, would it not affect the performance of the Rad?

As I'm pointing out alot of this is dependant on the fan you are using. If I used Yate Loon Low Speeds', then no it would not affect the performance of the Rad. Now see, I'm going to use two of the High Speeds in Push/Pull with a shroud after the Push fan which should increase the volume of flow from the Puller since it will be driven harder by the shrouded Pusher.

Are there dead spots? Yes there are. Roughly 45cm^2 worth of dead spots per fan. No fan is free of them because directly behind the hub is the dead space. But putting a shroud behind it allows the space to shrink, thereby allowing the fan to increase the performance of the Rad. And again how much of an increase is dependent on the fans being used.

~Ceadder
Sorry man, I am not following you here 100%. Let me try restating my hypothesis. Wouldn't be the first time I was less than clear.

What I was getting at is this, the TK-122 is optimized for use as a radiator pull fan, hence the gap on the pull side. The motor is roughly flush to the edge of the fan housing on the push side, the side that goes to the rad when used as a push. What I am saying is "we" are not getting any kind of "shroud" effect on the push side of the fan up against the rad. It is a dead spot just like every other fan. There has to be a physical shroud added to eliminate the dead spot.

Now, these are some serious kick ass fans (3.380 H20 max static pressure) so it is quite likely these will perform better than x-fan both without a shroud but there is still no shroud built into the TK-122's that would benefit performance in push. -Jeff
post #9903 of 28303
Aha, gotcha. That makes better sense now. Thanks for clearing that up.

~Ceadder

Quote:
Originally Posted by TweakerNoob View Post
Sorry man, I am not following you here 100%. Let me try restating my hypothesis. Wouldn't be the first time I was less than clear.

What I was getting at is this, the TK-122 is optimized for use as a radiator pull fan, hence the gap on the pull side. The motor is roughly flush to the edge of the fan housing on the push side, the side that goes to the rad when used as a push. What I am saying is "we" are not getting any kind of "shroud" effect on the push side of the fan up against the rad. It is a dead spot just like every other fan. There has to be a physical shroud added to eliminate the dead spot.

Now, these are some serious kick ass fans (3.380 H20 max static pressure) so it is quite likely these will perform better than x-fan both without a shroud but there is still no shroud built into the TK-122's that would benefit performance in push. -Jeff
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #9904 of 28303
In the last 2 days my cpu temps have jumped up about 4-5c for no explainable reason. My basement stays about 74f, I am running a p/p with 2 cr4's, Just trying to understand why, even my hd's have jumped, video card has jumped as well but not really worried about that.

Any thoughts as to why?

Edit: Yes they still seem ok and nothing gets to hot on load, just tring to understand.

Edited by navit - 6/13/10 at 7:39am
Nav's Intel
(14 items)
 
Nav Platform
(13 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II X6 1090T BE @ 4.0 GHz/1.39v} Asus Crosshair IV Formula MSI 7870 Twin Frozer III Crossfire 16gb Gskill Ripjaws X-1600{9-9-9-24} 
Hard DriveOSMonitorKeyboard
WD 1TB Black/750GB Black Windows 7 64bit Pro ASUS 23.6/1920X1080 Razer 
PowerCaseMouse
Seasonic x750gold Lian Li Lancool PC-K63 Razer Death Adder 
  hide details  
Reply
Nav's Intel
(14 items)
 
Nav Platform
(13 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II X6 1090T BE @ 4.0 GHz/1.39v} Asus Crosshair IV Formula MSI 7870 Twin Frozer III Crossfire 16gb Gskill Ripjaws X-1600{9-9-9-24} 
Hard DriveOSMonitorKeyboard
WD 1TB Black/750GB Black Windows 7 64bit Pro ASUS 23.6/1920X1080 Razer 
PowerCaseMouse
Seasonic x750gold Lian Li Lancool PC-K63 Razer Death Adder 
  hide details  
Reply
post #9905 of 28303
Who cares, lol you've got 19C idle on cpu and 29C idle on 5870.
My cpu also went up about 5 degrees despite having the same ambients, weird.
    
CPUMotherboardGraphicsRAM
[intel] i5 2500K @ 4.5 GHz [Asus] P8Z68-V [GB] GTX 970 G1 [Kingston] HyperX Fury 1600MHz - 16GB 
Hard DriveOSMonitorPower
[Crucial] MX 100 Windows 10 64 bit [BenQ] XL2411Z [EVGA] SuperNOVA 750W G2 
Case
[Corsair] 330R 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[intel] i5 2500K @ 4.5 GHz [Asus] P8Z68-V [GB] GTX 970 G1 [Kingston] HyperX Fury 1600MHz - 16GB 
Hard DriveOSMonitorPower
[Crucial] MX 100 Windows 10 64 bit [BenQ] XL2411Z [EVGA] SuperNOVA 750W G2 
Case
[Corsair] 330R 
  hide details  
Reply
post #9906 of 28303
Quote:
Originally Posted by zefs View Post
Who cares, lol you've got 19C idle on cpu and 29C idle on 5870.
My cpu also went up about 5 degrees despite having the same ambients, weird.
LOL, be nice now, I was trying to understand why, never said things overheating

most of the time my hd's are in the mid 20's not the 30's, and my 5870 is at 26c most of the time
Edited by navit - 6/13/10 at 8:26am
Nav's Intel
(14 items)
 
Nav Platform
(13 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II X6 1090T BE @ 4.0 GHz/1.39v} Asus Crosshair IV Formula MSI 7870 Twin Frozer III Crossfire 16gb Gskill Ripjaws X-1600{9-9-9-24} 
Hard DriveOSMonitorKeyboard
WD 1TB Black/750GB Black Windows 7 64bit Pro ASUS 23.6/1920X1080 Razer 
PowerCaseMouse
Seasonic x750gold Lian Li Lancool PC-K63 Razer Death Adder 
  hide details  
Reply
Nav's Intel
(14 items)
 
Nav Platform
(13 items)
 
 
CPUMotherboardGraphicsRAM
Phenom II X6 1090T BE @ 4.0 GHz/1.39v} Asus Crosshair IV Formula MSI 7870 Twin Frozer III Crossfire 16gb Gskill Ripjaws X-1600{9-9-9-24} 
Hard DriveOSMonitorKeyboard
WD 1TB Black/750GB Black Windows 7 64bit Pro ASUS 23.6/1920X1080 Razer 
PowerCaseMouse
Seasonic x750gold Lian Li Lancool PC-K63 Razer Death Adder 
  hide details  
Reply
post #9907 of 28303
No, I am just jealous
Don't know why that happens but as I said I also noticed the same.
Could it be some particular component overheating? probably not since ambients whould have increased, who knows!
    
CPUMotherboardGraphicsRAM
[intel] i5 2500K @ 4.5 GHz [Asus] P8Z68-V [GB] GTX 970 G1 [Kingston] HyperX Fury 1600MHz - 16GB 
Hard DriveOSMonitorPower
[Crucial] MX 100 Windows 10 64 bit [BenQ] XL2411Z [EVGA] SuperNOVA 750W G2 
Case
[Corsair] 330R 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[intel] i5 2500K @ 4.5 GHz [Asus] P8Z68-V [GB] GTX 970 G1 [Kingston] HyperX Fury 1600MHz - 16GB 
Hard DriveOSMonitorPower
[Crucial] MX 100 Windows 10 64 bit [BenQ] XL2411Z [EVGA] SuperNOVA 750W G2 
Case
[Corsair] 330R 
  hide details  
Reply
post #9908 of 28303
Hey guys working on my build this week. Which fans should I plug into the MB headers. I have a cpu,power, and three chassis headers. Im using the HAF 932 and a h50 with gentle typhoon AP 15's in a push pull located in the 5.25 drive bay on intake. I am fashioning some sort of way to direct all the heat from the h50 exhaust fans up to the top mounted fan so that it will not hang around the case. if anyone has tried this pics would be cool.
new build
(13 items)
 
  
CPUMotherboardGraphicsRAM
I7 930 Asus P6X58D ZOTAC nVidia GeForce GTX480 Corsair Dominator 6GB 
Hard DriveOptical DriveOSMonitor
Intel X25-M 160GB SSD LG UH10LS20K 10X Blueray Windows 7 Ultimate Samsung Syncmaster 2333SW 
KeyboardPowerCaseMouse
Apple Corsair hx1000w Cooler Master HAF 932 Kensington Turbo Mouse Pro 
  hide details  
Reply
new build
(13 items)
 
  
CPUMotherboardGraphicsRAM
I7 930 Asus P6X58D ZOTAC nVidia GeForce GTX480 Corsair Dominator 6GB 
Hard DriveOptical DriveOSMonitor
Intel X25-M 160GB SSD LG UH10LS20K 10X Blueray Windows 7 Ultimate Samsung Syncmaster 2333SW 
KeyboardPowerCaseMouse
Apple Corsair hx1000w Cooler Master HAF 932 Kensington Turbo Mouse Pro 
  hide details  
Reply
post #9909 of 28303
Just plug your fans in off the PSU. A thousand watts ain't no joke, so I would chain your GTs' to the PSU. At the moment I have 6 fans going 3 of them are chained off one PSU lead and the Front LED 230 and my floor level 120 are chained off another.

If you have the money I would get a fan controller and chain them off one of the connections depending on the overall wattage capability of the unit.

~Ceadder

Quote:
Originally Posted by agentemo1 View Post
Hey guys working on my build this week. Which fans should I plug into the MB headers. I have a cpu,power, and three chassis headers. Im using the HAF 932 and a h50 with gentle typhoon AP 15's in a push pull located in the 5.25 drive bay on intake. I am fashioning some sort of way to direct all the heat from the h50 exhaust fans up to the top mounted fan so that it will not hang around the case. if anyone has tried this pics would be cool.
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #9910 of 28303
Hey, tried asking about this some days ago, but didn't get any answer. I got 2x GentleTyphoons at 1850RPM for P/P with my H50 and got 2x GentleTyphoon's 800RPM and one H50 stock fan that I want to use as case fans. I'm going to mount them in the top of the case (800D) but I don't know if I should mount them as intake or exhaust?
Please help
Gaming PC
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 860 4 GHz @ 1.23v  ASUS P7P55D Deluxe ASUS HD 5970 Corsair Vengeance DDR3 1600MHz 8GB CL8 
Hard DriveHard DriveHard DriveCooling
Samsung Spinpoint F3 1 TB  Intel X25-M 80 GB Western Digital Caviar Green 2 TB Corsair H70 
OSMonitorKeyboardPower
Windows 7 Ultimate x64 BenQ XL2420T Filco Majestouch 2 /w Brown Switches Corsair HX 1000W 
CaseMouseMouse PadAudio
Corsair Obsidian 800D Zowie EC1 eVo QPAD CT|Large Black (custom made, solid colour) Sennheiser HD595 
Audio
Asus Xonar STX 
  hide details  
Reply
Gaming PC
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 860 4 GHz @ 1.23v  ASUS P7P55D Deluxe ASUS HD 5970 Corsair Vengeance DDR3 1600MHz 8GB CL8 
Hard DriveHard DriveHard DriveCooling
Samsung Spinpoint F3 1 TB  Intel X25-M 80 GB Western Digital Caviar Green 2 TB Corsair H70 
OSMonitorKeyboardPower
Windows 7 Ultimate x64 BenQ XL2420T Filco Majestouch 2 /w Brown Switches Corsair HX 1000W 
CaseMouseMouse PadAudio
Corsair Obsidian 800D Zowie EC1 eVo QPAD CT|Large Black (custom made, solid colour) Sennheiser HD595 
Audio
Asus Xonar STX 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club