Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club
New Posts  All Forums:Forum Nav:

[Official] Corsair Hydro Series Club - Page 997

post #9961 of 28354
Quote:
Originally Posted by SM0k3 View Post
When you guys finish would someone assist me with an answer to my post about, thanks.
I don't know what's going on with you but I hope this helps, even if it's just a little.

Quote:
Originally Posted by Pings View Post
Asetek makes the H50. Asetek also makes there own brand coolers. There is the Asetek LCLC and the Asetek LCLC 240MM Radiator. From what I understand the H50 has water inside them and the Asetek brand has a some sort of a liquid cooling fluid. Check some other Asetek coolers, NorthQ, Maingear, Alienware, HP, and others. Again Corasir doesn't even make the H50, Asetek does. The engineers who make the H50 recommend the their unit to be in exhaust, for good reason to. I say listen to a trained engineer, not a untrained benchmarker at Corsair. The intake vs exhaust is more based on your GFX card and Case. Corsair recommends intake, but Asetek the company who actually makes the H50 recommends exhaust. Like I said it really has to do with your GFX card and case. If you have a GFX with an air handler that blows hot air out the rear of your case. Its a good idea to have the H50 in exhaust. If you have a Vapor-X type of GFX card with no air handler, its better to be intake. Also do you have a place for that hot air to go once its in your PC case. For the guys who have an air handlers on their GFX cards and their H50s in intake, need to be warned. Do to the season and AC'd rooms, hot air from your GFX card is mixing with the cool air inside the radiator of the H50. This mixing creates condensation. That condensation is moisture that is now being blowing into your PC. But don't pay me no mind, feel free to try any way you like, and post about it. That's what this site is here for.


"Asetek’s factory sealed liquid cooling system is specifically designed to exhaust CPU heat directly outside of the chassis." - Asetek
post #9962 of 28354
Quote:
Originally Posted by Pings View Post
It might be a wannabe, but my H50 was better than my Megahalems. After modding my H50 it wiped the floor of my Megahalems. You CPU cooler gets beat by a wannabe water cooler.


kidding
lol, I don't know if you typo'd my kidding in white or quoted me before I changed it. But Yeah, I tried my friends H50 in push pull with the same exact fans/paste and found the Meghalems to be at least 5C cooler then the H50. Of course, my case features reverse airflow where cool air can get sucked in right to the cooler.

I've never tried the shroud method, but I shall give it a whirl once best buy puts these things on sale. I got around $40 on a stupid giftcard from my parents.
post #9963 of 28354
Ok, just got good news that my temp is indeed 29c! Under Maximum stress test in IntelBurn my temp maxed out @ 50c. Finally the bug is squashed, now I can proceed with furthering my O/C speed.
Da Beast
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.6ghz Asus P8Z68-V/GEN3 PNY GTX 570 -- 950/1900/2000 @ 1.100v 8GB Corsair XMS3 DDR3-1600 
Hard DriveOSMonitorKeyboard
2x Maxtor 1TB Sata Windows 7 64bit 24" samsung 2433bw ZBoard 
PowerCaseMouseMouse Pad
Corsair 850w Antec Nine Hundred Generic Black optical black mat 
  hide details  
Reply
Da Beast
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.6ghz Asus P8Z68-V/GEN3 PNY GTX 570 -- 950/1900/2000 @ 1.100v 8GB Corsair XMS3 DDR3-1600 
Hard DriveOSMonitorKeyboard
2x Maxtor 1TB Sata Windows 7 64bit 24" samsung 2433bw ZBoard 
PowerCaseMouseMouse Pad
Corsair 850w Antec Nine Hundred Generic Black optical black mat 
  hide details  
Reply
post #9964 of 28354
Just a small but improved update on mine. Using 2 Panaflo (Other one is possibly a San Ace, no sticker) 120mm x 38mm, 86.5CFM fans in push/pull, exhaust to the back over the pos fans I was using. Pretty significant difference, about 5c better, just idle though. I'm sure it'll be a lot better on load/stressing.
LL
Edited by Nightz2k - 6/14/10 at 3:49am
post #9965 of 28354
Okay, so here's how my computer looks now:

There is one fan that you can't see, which is the stock 140mm to the right next to the HDD bay, but it is covered with the plasticbox. Don't know if I should remove that.
As you can see the only fans that are mounted (except for stock) are the Push/Pull fans in exhaust for the H50. Here are the fans I'm going to mount:

I don't know if I'm going to use the stock Corsair fans (one is 120mm, one is 140 mm), depends on if I find the screws or not.
The place where I know that I can fit 3x 120mm fans is here:

I don't know if there is a place I can mount the 140 mm fan.
So, I was originally thinking on mounting the 2 GT's (800RPM) and the 120mm Corsair fan in the top as intake to better my GPU temp's (they're high as hell), but as you're saying I don't know if it's smart when I only got one exhaust place. So what do you think?
Thanks for helping
Gaming PC
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 860 4 GHz @ 1.23v  ASUS P7P55D Deluxe ASUS HD 5970 Corsair Vengeance DDR3 1600MHz 8GB CL8 
Hard DriveHard DriveHard DriveCooling
Samsung Spinpoint F3 1 TB  Intel X25-M 80 GB Western Digital Caviar Green 2 TB Corsair H70 
OSMonitorKeyboardPower
Windows 7 Ultimate x64 BenQ XL2420T Filco Majestouch 2 /w Brown Switches Corsair HX 1000W 
CaseMouseMouse PadAudio
Corsair Obsidian 800D Zowie EC1 eVo QPAD CT|Large Black (custom made, solid colour) Sennheiser HD595 
Audio
Asus Xonar STX 
  hide details  
Reply
Gaming PC
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 860 4 GHz @ 1.23v  ASUS P7P55D Deluxe ASUS HD 5970 Corsair Vengeance DDR3 1600MHz 8GB CL8 
Hard DriveHard DriveHard DriveCooling
Samsung Spinpoint F3 1 TB  Intel X25-M 80 GB Western Digital Caviar Green 2 TB Corsair H70 
OSMonitorKeyboardPower
Windows 7 Ultimate x64 BenQ XL2420T Filco Majestouch 2 /w Brown Switches Corsair HX 1000W 
CaseMouseMouse PadAudio
Corsair Obsidian 800D Zowie EC1 eVo QPAD CT|Large Black (custom made, solid colour) Sennheiser HD595 
Audio
Asus Xonar STX 
  hide details  
Reply
post #9966 of 28354
Thinking of going Push/Pull what are the "best fans" i could probably use 120MM obviously.
Lord Vader
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 920 @ 4.03Ghz (Max 4.4) Gigabyte GA-X58A-UD3R REV2.0 ASUS GTX 480 @ 851/1900 6GB Triple Channel DDR3 1600Mhz Corsair+OCZ 
Hard DriveOptical DriveOSMonitor
500GB WD Cavair Blue + 500GB Seagate Storage Drive LG HG22NS50 22x DVDRW Windows 7 Ultimate x64/ Snow Leopard Samsung SyncMaster B2230H 1080P 
KeyboardPowerCaseMouse
Apple Wired Aluminum Keyboard Corsair HX650W Modular HAF X Logitech G500 
Mouse Pad
Inno3D IChiLL 
  hide details  
Reply
Lord Vader
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 920 @ 4.03Ghz (Max 4.4) Gigabyte GA-X58A-UD3R REV2.0 ASUS GTX 480 @ 851/1900 6GB Triple Channel DDR3 1600Mhz Corsair+OCZ 
Hard DriveOptical DriveOSMonitor
500GB WD Cavair Blue + 500GB Seagate Storage Drive LG HG22NS50 22x DVDRW Windows 7 Ultimate x64/ Snow Leopard Samsung SyncMaster B2230H 1080P 
KeyboardPowerCaseMouse
Apple Wired Aluminum Keyboard Corsair HX650W Modular HAF X Logitech G500 
Mouse Pad
Inno3D IChiLL 
  hide details  
Reply
post #9967 of 28354
Gentle Typhoons are quite good and silent/cheap at the same time.
    
CPUMotherboardGraphicsRAM
[intel] i5 2500K @ 4.5 GHz [Asus] P8Z68-V [GB] GTX 970 G1 [Kingston] HyperX Fury 1600MHz - 16GB 
Hard DriveOSMonitorPower
[Crucial] MX 100 Windows 10 64 bit [BenQ] XL2411Z [EVGA] SuperNOVA 750W G2 
Case
[Corsair] 330R 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
[intel] i5 2500K @ 4.5 GHz [Asus] P8Z68-V [GB] GTX 970 G1 [Kingston] HyperX Fury 1600MHz - 16GB 
Hard DriveOSMonitorPower
[Crucial] MX 100 Windows 10 64 bit [BenQ] XL2411Z [EVGA] SuperNOVA 750W G2 
Case
[Corsair] 330R 
  hide details  
Reply
post #9968 of 28354
The yate loons caught my eye and was thinking of getting them anyone got any expeirences with them performance wise ?
Lord Vader
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 920 @ 4.03Ghz (Max 4.4) Gigabyte GA-X58A-UD3R REV2.0 ASUS GTX 480 @ 851/1900 6GB Triple Channel DDR3 1600Mhz Corsair+OCZ 
Hard DriveOptical DriveOSMonitor
500GB WD Cavair Blue + 500GB Seagate Storage Drive LG HG22NS50 22x DVDRW Windows 7 Ultimate x64/ Snow Leopard Samsung SyncMaster B2230H 1080P 
KeyboardPowerCaseMouse
Apple Wired Aluminum Keyboard Corsair HX650W Modular HAF X Logitech G500 
Mouse Pad
Inno3D IChiLL 
  hide details  
Reply
Lord Vader
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 920 @ 4.03Ghz (Max 4.4) Gigabyte GA-X58A-UD3R REV2.0 ASUS GTX 480 @ 851/1900 6GB Triple Channel DDR3 1600Mhz Corsair+OCZ 
Hard DriveOptical DriveOSMonitor
500GB WD Cavair Blue + 500GB Seagate Storage Drive LG HG22NS50 22x DVDRW Windows 7 Ultimate x64/ Snow Leopard Samsung SyncMaster B2230H 1080P 
KeyboardPowerCaseMouse
Apple Wired Aluminum Keyboard Corsair HX650W Modular HAF X Logitech G500 
Mouse Pad
Inno3D IChiLL 
  hide details  
Reply
post #9969 of 28354
Awesome fans. 88cfm, though they do liven up the case on the dB level. I've got 3 120 High Speeds and 1 140 set to exhaust. You can definitely tell the difference from stock. When I put my hand at the back of my case to see what the flow was like from stock it was barely noticeable. A definite difference when you put your hand back there now.

My temps are @ 30c and don't get much higher either.

~Ceadder

Quote:
Originally Posted by Wingzero View Post
The yate loons caught my eye and was thinking of getting them anyone got any expeirences with them performance wise ?
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #9970 of 28354
Hi I would like to join the club as well.I've just ordered mine so it should arrive on Wednesday.Will post pics then.Hopefully it will cool my 955 better than the Tuniq cooler.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] Corsair Hydro Series Club