Overclock.net › Forums › Cooling › Specialized Cooling › Dry Ice/ Liquid Nitrogen › Frozen Path. Sub-Zero Cooling Club.
New Posts  All Forums:Forum Nav:

Frozen Path. Sub-Zero Cooling Club. - Page 471

post #4701 of 7326
Quote:
Originally Posted by marc0053 View Post


I used only 1 foam cooler over the course of 1 week to poor a full 180L tank into 50L Dewar and then foam container to multiple thermos and it worked great.

How quickly does that thing get cold because I could honestly just use it when I'm bringing my venom pot down to temp and pour straight from that to the venom.
post #4702 of 7326
I used the foam container simply to transfer from the Dewar to multiple thermos. The LN2 only stayed in the foam container for a max of 2-3 minutes at a time. I tried pooring from the Dewar directly to a 1L thermos and that procedure failed quickly.

robbo2 was the one who gave me that idea.
Quote:
Originally Posted by robbo2 View Post

Pouring direct from the dewar, I pour it into a styrofoam box then into the flask. Much less spillage.

Edited by marc0053 - 10/16/14 at 10:58am
post #4703 of 7326
Quote:
Originally Posted by strong island 1 View Post

I'm stressing out trying to figure out how to pour out of a taylor wharton hc35, it's so big. What do you guys think would be the best way. it's impossible to pour directly into the thermos's and a plastic funnel splashes way too much. I have a big rubbermaid pitcher and I thought I could pour into that and then into thermos's. Would that work?

I got it for $200 plus shipping on ebay so it was hard to pass up. I filled it 2 months ago and it's still half full and never got cold on the outside. I might just sell it for $250 and find a small mouth one. Does anyone have a suggestion, will the rubbermaid pitcher work.

My wide mouth 47L i use a can on a stick biggrin.gif like a ladel.. works great too then once you get under half i started to do the same as others like pour into a syro box... thumb.gif atm pouring beer as holidays back home biggrin.gif

Ok so i have a fruit can taped to a stick with cloth tape.. did quite a few loops which the cloth tape hold fine from the cold for a couple of dips into the dewar to fill a thermos.. it does start to peel off alittle after that but by the time you need to fill a thermos again you can stick it back down. ghetto job i know but has proveed effective quicke means of filling thermos's for me anyway.. smuckels put me onto this way but he uses plumbers string to tie the can to a stick..
Edited by stubass - 10/16/14 at 11:28am
Going to be chaep
(16 items)
 
Wife's Rig
(12 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k Gigabyte GA-Z77X-UP5 TH MSI GTX460 G.Skill TridentX 2400 2 x 4GB 
Hard DriveHard DriveOptical DriveCooling
Plextor M5p 128GB 2 x WD 500GB Blues LG Prolimatech Megahalems Rev C 
CoolingOSMonitorPower
Arctic F12 CO PWM x 2 Push/Pull Windows 7 64 bit Ultimate LG IPS235V Corsair AX850 
Case
Coolermaster HAF 912 advanced (Asia version) 
CPUMotherboardGraphicsRAM
I5-3570K Gigabyte Z68X-UD3H-B3 Inno3D Ichill GTX660 8GB G.Skill RipjawsX 1600 
Hard DriveHard DriveOptical DriveCooling
Samsung 830 128GB WD black 500GB Liteon Coolermaster Hyper 212+ EVO 
OSMonitorPowerCase
Win 7 ultimate Samsung Syncmaster 932gwe+ OCZ ZT series 550W Coolermaster 410 
CPUMotherboardRAMHard Drive
1.67Ghz Atom stock 1GB DDR2 2 x 500GB Western Digital Cavier Blacks [RAID 1] 
CoolingOSPowerCase
stock DSM3.2 [built on linux] stock stock 
OtherOther
Synology DX510 Expansion unit 5 x 1TB WD Cavier Blacks in a RAID 6 
  hide details  
Reply
Going to be chaep
(16 items)
 
Wife's Rig
(12 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k Gigabyte GA-Z77X-UP5 TH MSI GTX460 G.Skill TridentX 2400 2 x 4GB 
Hard DriveHard DriveOptical DriveCooling
Plextor M5p 128GB 2 x WD 500GB Blues LG Prolimatech Megahalems Rev C 
CoolingOSMonitorPower
Arctic F12 CO PWM x 2 Push/Pull Windows 7 64 bit Ultimate LG IPS235V Corsair AX850 
Case
Coolermaster HAF 912 advanced (Asia version) 
CPUMotherboardGraphicsRAM
I5-3570K Gigabyte Z68X-UD3H-B3 Inno3D Ichill GTX660 8GB G.Skill RipjawsX 1600 
Hard DriveHard DriveOptical DriveCooling
Samsung 830 128GB WD black 500GB Liteon Coolermaster Hyper 212+ EVO 
OSMonitorPowerCase
Win 7 ultimate Samsung Syncmaster 932gwe+ OCZ ZT series 550W Coolermaster 410 
CPUMotherboardRAMHard Drive
1.67Ghz Atom stock 1GB DDR2 2 x 500GB Western Digital Cavier Blacks [RAID 1] 
CoolingOSPowerCase
stock DSM3.2 [built on linux] stock stock 
OtherOther
Synology DX510 Expansion unit 5 x 1TB WD Cavier Blacks in a RAID 6 
  hide details  
Reply
post #4704 of 7326
Quote:
Originally Posted by marc0053 View Post

I used the foam container simply to transfer from the Dewar to multiple thermos. The LN2 only stayed in the foam container for a max of 2-3 minutes at a time. I tried pooring from the Dewar directly to a 1L thermos and that procedure failed quickly.

robbo2 was the one who gave me that idea.

ya last night I was trying to pour directly into thermos's and it was going everywhere and my carpet was freezing and started rising a little bit.
Bench Rig
(20 items)
 
  
CPUCPUMotherboardGraphics
Intel i7 core 5960x intel i7 core 4770k Rampage V Extreme Asus GTX 980 Strix 
GraphicsRAMRAMHard Drive
Asus 780 ti Matrix G-Skill Ripjawz 4 G-Skill Trident X Samsung 840 Evo 120gb 
Hard DriveHard DriveCoolingCooling
Corsair Neutron 120gb Corsair Neutron 120gb Kingpin Tek 9 Fat GPU Pot Kingpin F1 Extreme CPU Pot 
CoolingCoolingOSOS
EK Universal GPU Water Block EK Supremacy CPU Block Win 7 64 bit Win XP 32 bit 
MonitorPowerCaseOther
Samsung S27A950D Corsair AX1200 Dimastech Easy v3 Bench and Armaflex Gigabyte Z97 SOC Force Motherboard 
  hide details  
Reply
Bench Rig
(20 items)
 
  
CPUCPUMotherboardGraphics
Intel i7 core 5960x intel i7 core 4770k Rampage V Extreme Asus GTX 980 Strix 
GraphicsRAMRAMHard Drive
Asus 780 ti Matrix G-Skill Ripjawz 4 G-Skill Trident X Samsung 840 Evo 120gb 
Hard DriveHard DriveCoolingCooling
Corsair Neutron 120gb Corsair Neutron 120gb Kingpin Tek 9 Fat GPU Pot Kingpin F1 Extreme CPU Pot 
CoolingCoolingOSOS
EK Universal GPU Water Block EK Supremacy CPU Block Win 7 64 bit Win XP 32 bit 
MonitorPowerCaseOther
Samsung S27A950D Corsair AX1200 Dimastech Easy v3 Bench and Armaflex Gigabyte Z97 SOC Force Motherboard 
  hide details  
Reply
post #4705 of 7326
Quote:
Originally Posted by strong island 1 View Post

Quote:
Originally Posted by marc0053 View Post

I used the foam container simply to transfer from the Dewar to multiple thermos. The LN2 only stayed in the foam container for a max of 2-3 minutes at a time. I tried pooring from the Dewar directly to a 1L thermos and that procedure failed quickly.

robbo2 was the one who gave me that idea.

ya last night I was trying to pour directly into thermos's and it was going everywhere and my carpet was freezing and started rising a little bit.

what i was talking about is this



you dont need to be that carefull to have no spillage... you only problem is when you get low you cant get much Ln2 into the can so then come pouring into the stryo and angle the styo box so you pour from a corner. actually i can get about 39L from a 47L dewar with that can job.
Going to be chaep
(16 items)
 
Wife's Rig
(12 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k Gigabyte GA-Z77X-UP5 TH MSI GTX460 G.Skill TridentX 2400 2 x 4GB 
Hard DriveHard DriveOptical DriveCooling
Plextor M5p 128GB 2 x WD 500GB Blues LG Prolimatech Megahalems Rev C 
CoolingOSMonitorPower
Arctic F12 CO PWM x 2 Push/Pull Windows 7 64 bit Ultimate LG IPS235V Corsair AX850 
Case
Coolermaster HAF 912 advanced (Asia version) 
CPUMotherboardGraphicsRAM
I5-3570K Gigabyte Z68X-UD3H-B3 Inno3D Ichill GTX660 8GB G.Skill RipjawsX 1600 
Hard DriveHard DriveOptical DriveCooling
Samsung 830 128GB WD black 500GB Liteon Coolermaster Hyper 212+ EVO 
OSMonitorPowerCase
Win 7 ultimate Samsung Syncmaster 932gwe+ OCZ ZT series 550W Coolermaster 410 
CPUMotherboardRAMHard Drive
1.67Ghz Atom stock 1GB DDR2 2 x 500GB Western Digital Cavier Blacks [RAID 1] 
CoolingOSPowerCase
stock DSM3.2 [built on linux] stock stock 
OtherOther
Synology DX510 Expansion unit 5 x 1TB WD Cavier Blacks in a RAID 6 
  hide details  
Reply
Going to be chaep
(16 items)
 
Wife's Rig
(12 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k Gigabyte GA-Z77X-UP5 TH MSI GTX460 G.Skill TridentX 2400 2 x 4GB 
Hard DriveHard DriveOptical DriveCooling
Plextor M5p 128GB 2 x WD 500GB Blues LG Prolimatech Megahalems Rev C 
CoolingOSMonitorPower
Arctic F12 CO PWM x 2 Push/Pull Windows 7 64 bit Ultimate LG IPS235V Corsair AX850 
Case
Coolermaster HAF 912 advanced (Asia version) 
CPUMotherboardGraphicsRAM
I5-3570K Gigabyte Z68X-UD3H-B3 Inno3D Ichill GTX660 8GB G.Skill RipjawsX 1600 
Hard DriveHard DriveOptical DriveCooling
Samsung 830 128GB WD black 500GB Liteon Coolermaster Hyper 212+ EVO 
OSMonitorPowerCase
Win 7 ultimate Samsung Syncmaster 932gwe+ OCZ ZT series 550W Coolermaster 410 
CPUMotherboardRAMHard Drive
1.67Ghz Atom stock 1GB DDR2 2 x 500GB Western Digital Cavier Blacks [RAID 1] 
CoolingOSPowerCase
stock DSM3.2 [built on linux] stock stock 
OtherOther
Synology DX510 Expansion unit 5 x 1TB WD Cavier Blacks in a RAID 6 
  hide details  
Reply
post #4706 of 7326
Quote:
Originally Posted by stubass View Post

what i was talking about is this



you dont need to be that carefull to have no spillage... you only problem is when you get low you cant get much Ln2 into the can so then come pouring into the stryo and angle the styo box so you pour from a corner. actually i can get about 39L from a 47L dewar with that can job.

ya that looks cool. I don't care if a spill a bit but not a ton. The problem is when benching a high voltage card and a cpu like a 4930k I go thru a ton of ln2. There are times when in the middle of a long bench or in between benches I can jump up and quickly pour 4 thermos's with my 20L. That can would take a long time. it looks like it would be nice for cpu benching.
Bench Rig
(20 items)
 
  
CPUCPUMotherboardGraphics
Intel i7 core 5960x intel i7 core 4770k Rampage V Extreme Asus GTX 980 Strix 
GraphicsRAMRAMHard Drive
Asus 780 ti Matrix G-Skill Ripjawz 4 G-Skill Trident X Samsung 840 Evo 120gb 
Hard DriveHard DriveCoolingCooling
Corsair Neutron 120gb Corsair Neutron 120gb Kingpin Tek 9 Fat GPU Pot Kingpin F1 Extreme CPU Pot 
CoolingCoolingOSOS
EK Universal GPU Water Block EK Supremacy CPU Block Win 7 64 bit Win XP 32 bit 
MonitorPowerCaseOther
Samsung S27A950D Corsair AX1200 Dimastech Easy v3 Bench and Armaflex Gigabyte Z97 SOC Force Motherboard 
  hide details  
Reply
Bench Rig
(20 items)
 
  
CPUCPUMotherboardGraphics
Intel i7 core 5960x intel i7 core 4770k Rampage V Extreme Asus GTX 980 Strix 
GraphicsRAMRAMHard Drive
Asus 780 ti Matrix G-Skill Ripjawz 4 G-Skill Trident X Samsung 840 Evo 120gb 
Hard DriveHard DriveCoolingCooling
Corsair Neutron 120gb Corsair Neutron 120gb Kingpin Tek 9 Fat GPU Pot Kingpin F1 Extreme CPU Pot 
CoolingCoolingOSOS
EK Universal GPU Water Block EK Supremacy CPU Block Win 7 64 bit Win XP 32 bit 
MonitorPowerCaseOther
Samsung S27A950D Corsair AX1200 Dimastech Easy v3 Bench and Armaflex Gigabyte Z97 SOC Force Motherboard 
  hide details  
Reply
post #4707 of 7326
I initially had a spoon made up for filling up the thermos but found that it took me longer than pouring directly into a Styrofoam container and then to the Thermos. My spoon was only about 1 cup (250ml) so it took 2-3 spoonful to fill 1L thermos. If you had a spoon the size of Stubass's I'm sure it would be much quicker to fill your Thermos. I had the 4930K to 5.7GHz with about 1.6V and it drank LN2 like crazy so I found the Styrofoam method worked great and even that was difficult to keep up. I was filling up 3 x 1L thermos + 1 x 500ml Thermos. I recently purchased 1x 2L thermos and I think that will help a lot for my next LN2 run (hopefully in the near future). Have fun!

post #4708 of 7326
Is it normal for Cedar Mill cpu's to heat up extreamly fast ?
I tried 2different TIMs and I was hitting 60°C at 1.75V.
I even installed evaporator without insulation to actually check cpu temperature with finger.
So at first there was a bit of frost but when I bumped the vcore then the frost quickly disappeared.
The cpu was barely cold.

The cpu itself was rather medicore. I managed to achieve 5.5ghz but I couldn't push the cpu further due to thermal limits. I think that with lower temperature I will be able to break 6ghz.
GROM II [Gaming]
(34 items)
 
 
MIR[server]
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 5820K@4.6Ghz@1.325V 2.05V input Asrock X99 Extreme 4 Sapphire R9 290X [Uber Mode] Nvidia Geforce GT240 GDDR5 512MB [PhysX + analo... 
RAMRAMRAMHard Drive
Crucial Ballistix 2400mhz 4GB 1.3V Crucial 2133@2400mhz 4GB 1.3V Crucial 2133@2400mhz 4GB 1.3V Seagate 4TB 
Hard DriveHard DriveHard DriveCooling
Samsung 840 EVO 120GB[OS] WD Red 1TB Samsung 840EVO 120GB[Arma 3] Koolance 380A [modded for LGA2011v3] 
CoolingCoolingCoolingCooling
Black Water Ultimate 123 [3x Corsair AF120 Perf... MCP655 with Alphacool HF acetal top [5th gear] Feser 10/13 UV Tubing Alphacool CKC clear 
CoolingCoolingCoolingOS
Cooltek 120mm rad [antec tri-speed] Cooltek 120mm Rad [Corsair SP120 High Performan... Alphacool GPX-A 290 [290X waterblock] Windows 7 Ulitimate 64 bit  
MonitorMonitorMonitorMonitor
LG 29EA93 [2560x1080] LG L1715S [1280x1024] Samsung SMB2030N [1600x900] DIY display on V59 controller[1366x768@1440x900] 
KeyboardPowerCaseMouse
4Tech X7 G800 Cooler Master Real Power 850w Cooler Master Haf 932 Amd Edition Microsoft Mobile Mouse 4000 
AudioAudioAudioOther
Superlux hd681 FiiO E07K SoundMax Superbeam [bundled with P5B DLX] Scythe Kaze Master Pro 6 chanell 
OtherOther
2x Sharkoon 30cm red cold cathodes 2x Revoltec 10cm UV cold cathodes 
CPUMotherboardGraphicsRAM
Athlon II X2 250 @2GHZ @1core Gigabyte 870A-USB3 Ati X600 128MB GoodRam 4gb 1333mhz 
Hard DriveHard DriveHard DriveHard Drive
Hitachi Ultrastar 1TB Samsung 40gb[OS] 6x Hitachi 2TB (RAID 6) 2x160GB RAID 1 
OSPowerOtherOther
Debian 8.2.0 x64 Pentagram Silent Force 460W Ever Eco Pro 700 CDS [UPS] Edimax EW-7318USg [Access Point] 
CPUCPUMotherboardGraphics
Xeon E5420 Xeon E5420 HP ML350 G5 motherboard HD5450 with HD5770 cooler on passive [PCIE X4] 
RAMHard DriveHard DriveHard Drive
20GB FB-DIMM@800mhz 2x40GB WD RAID0 Sata [11year old as for 2015] 2x73GB HP 15K RPM RAID0 SAS HP 10K RPM 143GB SAS 
Hard DriveHard DriveMonitorPower
HP 10K RPM 143GB SAS HP 10K RPM 143GB SAS Fujitsu W19-1 [1440x900] Delta DPS 800W 
CaseOtherOtherOther
HP ML350 G5 case Adaptec SATA II RAID 1220SA ADAPTEC SCSI-CARD 29320LP Quantum TC-L32BX LTO 3 [tape drive] 
  hide details  
Reply
GROM II [Gaming]
(34 items)
 
 
MIR[server]
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 5820K@4.6Ghz@1.325V 2.05V input Asrock X99 Extreme 4 Sapphire R9 290X [Uber Mode] Nvidia Geforce GT240 GDDR5 512MB [PhysX + analo... 
RAMRAMRAMHard Drive
Crucial Ballistix 2400mhz 4GB 1.3V Crucial 2133@2400mhz 4GB 1.3V Crucial 2133@2400mhz 4GB 1.3V Seagate 4TB 
Hard DriveHard DriveHard DriveCooling
Samsung 840 EVO 120GB[OS] WD Red 1TB Samsung 840EVO 120GB[Arma 3] Koolance 380A [modded for LGA2011v3] 
CoolingCoolingCoolingCooling
Black Water Ultimate 123 [3x Corsair AF120 Perf... MCP655 with Alphacool HF acetal top [5th gear] Feser 10/13 UV Tubing Alphacool CKC clear 
CoolingCoolingCoolingOS
Cooltek 120mm rad [antec tri-speed] Cooltek 120mm Rad [Corsair SP120 High Performan... Alphacool GPX-A 290 [290X waterblock] Windows 7 Ulitimate 64 bit  
MonitorMonitorMonitorMonitor
LG 29EA93 [2560x1080] LG L1715S [1280x1024] Samsung SMB2030N [1600x900] DIY display on V59 controller[1366x768@1440x900] 
KeyboardPowerCaseMouse
4Tech X7 G800 Cooler Master Real Power 850w Cooler Master Haf 932 Amd Edition Microsoft Mobile Mouse 4000 
AudioAudioAudioOther
Superlux hd681 FiiO E07K SoundMax Superbeam [bundled with P5B DLX] Scythe Kaze Master Pro 6 chanell 
OtherOther
2x Sharkoon 30cm red cold cathodes 2x Revoltec 10cm UV cold cathodes 
CPUMotherboardGraphicsRAM
Athlon II X2 250 @2GHZ @1core Gigabyte 870A-USB3 Ati X600 128MB GoodRam 4gb 1333mhz 
Hard DriveHard DriveHard DriveHard Drive
Hitachi Ultrastar 1TB Samsung 40gb[OS] 6x Hitachi 2TB (RAID 6) 2x160GB RAID 1 
OSPowerOtherOther
Debian 8.2.0 x64 Pentagram Silent Force 460W Ever Eco Pro 700 CDS [UPS] Edimax EW-7318USg [Access Point] 
CPUCPUMotherboardGraphics
Xeon E5420 Xeon E5420 HP ML350 G5 motherboard HD5450 with HD5770 cooler on passive [PCIE X4] 
RAMHard DriveHard DriveHard Drive
20GB FB-DIMM@800mhz 2x40GB WD RAID0 Sata [11year old as for 2015] 2x73GB HP 15K RPM RAID0 SAS HP 10K RPM 143GB SAS 
Hard DriveHard DriveMonitorPower
HP 10K RPM 143GB SAS HP 10K RPM 143GB SAS Fujitsu W19-1 [1440x900] Delta DPS 800W 
CaseOtherOtherOther
HP ML350 G5 case Adaptec SATA II RAID 1220SA ADAPTEC SCSI-CARD 29320LP Quantum TC-L32BX LTO 3 [tape drive] 
  hide details  
Reply
post #4709 of 7326
4370 dual core XTU on M6E on bios 1603, everything working well much better than prior bios 1402.



post #4710 of 7326
Very nice loud thumb.gif
Athena
(14 items)
 
Achilles
(9 items)
 
 
CPUMotherboardGraphicsHard Drive
[Intel] i5 2500k  [ASUS] p8p67 Evo B3 [EVGA] GTX 680 [Samsung] 1TB 
CoolingOSMonitorKeyboard
[Noctua] NH-D14 [Micro$oft] Win7 64-bit/Linux [HP] 2311x [Logitech] G510 
PowerCaseMouse
[XFX] 650W [Cooler Master] HAF X [Logitech] G400 
CPUMotherboardGraphicsRAM
990X 6.5Ghz EVGA X58 3 way SLI classified XFX GT 240/modded 8800GTS/8800GTX/5870/4980/FIR... Corsair Dominator PSC  
CoolingOSMonitorCase
F1 Extreme Dark, DICE and LN2!! XPeeeee and Win 7 Old CRT Open 
  hide details  
Reply
Athena
(14 items)
 
Achilles
(9 items)
 
 
CPUMotherboardGraphicsHard Drive
[Intel] i5 2500k  [ASUS] p8p67 Evo B3 [EVGA] GTX 680 [Samsung] 1TB 
CoolingOSMonitorKeyboard
[Noctua] NH-D14 [Micro$oft] Win7 64-bit/Linux [HP] 2311x [Logitech] G510 
PowerCaseMouse
[XFX] 650W [Cooler Master] HAF X [Logitech] G400 
CPUMotherboardGraphicsRAM
990X 6.5Ghz EVGA X58 3 way SLI classified XFX GT 240/modded 8800GTS/8800GTX/5870/4980/FIR... Corsair Dominator PSC  
CoolingOSMonitorCase
F1 Extreme Dark, DICE and LN2!! XPeeeee and Win 7 Old CRT Open 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Dry Ice/ Liquid Nitrogen
Overclock.net › Forums › Cooling › Specialized Cooling › Dry Ice/ Liquid Nitrogen › Frozen Path. Sub-Zero Cooling Club.