Overclock.net › Forums › Components › Memory › Crucial Ballistix Tracer DDR2 1066...Is it really running at 1066?
New Posts  All Forums:Forum Nav:

Crucial Ballistix Tracer DDR2 1066...Is it really running at 1066?

post #1 of 14
Thread Starter 
I don't know whats up but I don't really know if my RAM is running the way it's supposed to.

From my knowledge, DDR2 functions as follows:

-DDR2 533=266MHz
-DDR2 667=333MHz
-DDR2 800=400MHz
-DDR2 1066=533MHz

I have 2GB of this RAM and when i run CPU-Z, my memory says the following:

DRAM Frequency= 399.1MHz
FSBRAM= 1:2
CAS# Latency= 5.0 clocks
RAS# to CAS# Delay= 5 clocks
etc.

If i go to the SPD tab and look at my memory, in the frequency row under EPP #2, it lists 533MHz

This is a bit confusing and if there is something i let that that can let you guys help me, tell me because i am curious.

Thanks
Main Rig (ITX)
(11 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4790k ASUS H97I-PLUS EVGA GeForce GTX 980 Ti FTW Corsair Vengeance DDR3 1600 2 x 4GB 
Hard DriveHard DriveHard DriveOS
Sandisk Z400s Seagate Barracuda 1TB 7200RPM 64MB Cache Seagate Barracuda 2TB 7200 RPM 64MB Cache Windows 10 Pro 
PowerCaseAudio
EVGA 600B Corsair Obsidian 250D M-Audio Mobile Pre 
  hide details  
Reply
Main Rig (ITX)
(11 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4790k ASUS H97I-PLUS EVGA GeForce GTX 980 Ti FTW Corsair Vengeance DDR3 1600 2 x 4GB 
Hard DriveHard DriveHard DriveOS
Sandisk Z400s Seagate Barracuda 1TB 7200RPM 64MB Cache Seagate Barracuda 2TB 7200 RPM 64MB Cache Windows 10 Pro 
PowerCaseAudio
EVGA 600B Corsair Obsidian 250D M-Audio Mobile Pre 
  hide details  
Reply
post #2 of 14
That's running at 800 (399x2). You should set it to 1066 (533) in BIOS. RAM rarely automatically runs at its rated speeds.
Quo vadis
(13 items)
 
  
CPUMotherboardGraphicsRAM
X3 720 @ 3.7/1.55 790XT-UD4P XFX 4890 4GB 1333/8-7-8-22, 2.6GHz NB 
Hard DriveOSPowerCase
640GB AALS Win7 Pro VX550 CM690 
  hide details  
Reply
Quo vadis
(13 items)
 
  
CPUMotherboardGraphicsRAM
X3 720 @ 3.7/1.55 790XT-UD4P XFX 4890 4GB 1333/8-7-8-22, 2.6GHz NB 
Hard DriveOSPowerCase
640GB AALS Win7 Pro VX550 CM690 
  hide details  
Reply
post #3 of 14
Your memory's running at 800MHz; change the settings in the BIOS. When you do this you may also need to change the DRAM Voltage to make it stable, the Voltage should be listed on the physical memory or the box it came in.

In CPU-Z you are looking at the SPD, you should be looking at the "Memory" tab instead.
post #4 of 14
Thread Starter 
Yeah i went into the BIOS and checked and it was running auto and the memory clock was running at 400. i believe the timings are set at 5-5-5-15. so when i set it manually what should I do. can you help me any more than that?
Main Rig (ITX)
(11 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4790k ASUS H97I-PLUS EVGA GeForce GTX 980 Ti FTW Corsair Vengeance DDR3 1600 2 x 4GB 
Hard DriveHard DriveHard DriveOS
Sandisk Z400s Seagate Barracuda 1TB 7200RPM 64MB Cache Seagate Barracuda 2TB 7200 RPM 64MB Cache Windows 10 Pro 
PowerCaseAudio
EVGA 600B Corsair Obsidian 250D M-Audio Mobile Pre 
  hide details  
Reply
Main Rig (ITX)
(11 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4790k ASUS H97I-PLUS EVGA GeForce GTX 980 Ti FTW Corsair Vengeance DDR3 1600 2 x 4GB 
Hard DriveHard DriveHard DriveOS
Sandisk Z400s Seagate Barracuda 1TB 7200RPM 64MB Cache Seagate Barracuda 2TB 7200 RPM 64MB Cache Windows 10 Pro 
PowerCaseAudio
EVGA 600B Corsair Obsidian 250D M-Audio Mobile Pre 
  hide details  
Reply
post #5 of 14
Set the clocks and timings to manual and manually change them to the rated settings. If your kit says for example 1.9V, 1066MHz and 5-5-5-12, set it to those settings, exit and save.

Is that the help you need?
Quo vadis
(13 items)
 
  
CPUMotherboardGraphicsRAM
X3 720 @ 3.7/1.55 790XT-UD4P XFX 4890 4GB 1333/8-7-8-22, 2.6GHz NB 
Hard DriveOSPowerCase
640GB AALS Win7 Pro VX550 CM690 
  hide details  
Reply
Quo vadis
(13 items)
 
  
CPUMotherboardGraphicsRAM
X3 720 @ 3.7/1.55 790XT-UD4P XFX 4890 4GB 1333/8-7-8-22, 2.6GHz NB 
Hard DriveOSPowerCase
640GB AALS Win7 Pro VX550 CM690 
  hide details  
Reply
post #6 of 14
Your memory should be running at:

Speed: 533 (*2)
Timings: 5-5-5-15
Voltage: 2.2V
post #7 of 14
Thread Starter 
okay im in memory config right now. i set DRAM frequency to manual and below it says Memclock value 200MHz. what should i do to that?
Main Rig (ITX)
(11 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4790k ASUS H97I-PLUS EVGA GeForce GTX 980 Ti FTW Corsair Vengeance DDR3 1600 2 x 4GB 
Hard DriveHard DriveHard DriveOS
Sandisk Z400s Seagate Barracuda 1TB 7200RPM 64MB Cache Seagate Barracuda 2TB 7200 RPM 64MB Cache Windows 10 Pro 
PowerCaseAudio
EVGA 600B Corsair Obsidian 250D M-Audio Mobile Pre 
  hide details  
Reply
Main Rig (ITX)
(11 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4790k ASUS H97I-PLUS EVGA GeForce GTX 980 Ti FTW Corsair Vengeance DDR3 1600 2 x 4GB 
Hard DriveHard DriveHard DriveOS
Sandisk Z400s Seagate Barracuda 1TB 7200RPM 64MB Cache Seagate Barracuda 2TB 7200 RPM 64MB Cache Windows 10 Pro 
PowerCaseAudio
EVGA 600B Corsair Obsidian 250D M-Audio Mobile Pre 
  hide details  
Reply
post #8 of 14
Is there a multiplier listed?
Quo vadis
(13 items)
 
  
CPUMotherboardGraphicsRAM
X3 720 @ 3.7/1.55 790XT-UD4P XFX 4890 4GB 1333/8-7-8-22, 2.6GHz NB 
Hard DriveOSPowerCase
640GB AALS Win7 Pro VX550 CM690 
  hide details  
Reply
Quo vadis
(13 items)
 
  
CPUMotherboardGraphicsRAM
X3 720 @ 3.7/1.55 790XT-UD4P XFX 4890 4GB 1333/8-7-8-22, 2.6GHz NB 
Hard DriveOSPowerCase
640GB AALS Win7 Pro VX550 CM690 
  hide details  
Reply
post #9 of 14
Thread Starter 
no i dont think so but when i clicked memclock value to set it, there was a list that said:

200MHz
266MHz
333MHz
400MHz
533MHz
im guesing 533MHz then?
Main Rig (ITX)
(11 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4790k ASUS H97I-PLUS EVGA GeForce GTX 980 Ti FTW Corsair Vengeance DDR3 1600 2 x 4GB 
Hard DriveHard DriveHard DriveOS
Sandisk Z400s Seagate Barracuda 1TB 7200RPM 64MB Cache Seagate Barracuda 2TB 7200 RPM 64MB Cache Windows 10 Pro 
PowerCaseAudio
EVGA 600B Corsair Obsidian 250D M-Audio Mobile Pre 
  hide details  
Reply
Main Rig (ITX)
(11 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4790k ASUS H97I-PLUS EVGA GeForce GTX 980 Ti FTW Corsair Vengeance DDR3 1600 2 x 4GB 
Hard DriveHard DriveHard DriveOS
Sandisk Z400s Seagate Barracuda 1TB 7200RPM 64MB Cache Seagate Barracuda 2TB 7200 RPM 64MB Cache Windows 10 Pro 
PowerCaseAudio
EVGA 600B Corsair Obsidian 250D M-Audio Mobile Pre 
  hide details  
Reply
post #10 of 14
Thread Starter 
okay i changed ot to 533 and cpuz says dram frequency is 532.2MHz
Main Rig (ITX)
(11 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4790k ASUS H97I-PLUS EVGA GeForce GTX 980 Ti FTW Corsair Vengeance DDR3 1600 2 x 4GB 
Hard DriveHard DriveHard DriveOS
Sandisk Z400s Seagate Barracuda 1TB 7200RPM 64MB Cache Seagate Barracuda 2TB 7200 RPM 64MB Cache Windows 10 Pro 
PowerCaseAudio
EVGA 600B Corsair Obsidian 250D M-Audio Mobile Pre 
  hide details  
Reply
Main Rig (ITX)
(11 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-4790k ASUS H97I-PLUS EVGA GeForce GTX 980 Ti FTW Corsair Vengeance DDR3 1600 2 x 4GB 
Hard DriveHard DriveHard DriveOS
Sandisk Z400s Seagate Barracuda 1TB 7200RPM 64MB Cache Seagate Barracuda 2TB 7200 RPM 64MB Cache Windows 10 Pro 
PowerCaseAudio
EVGA 600B Corsair Obsidian 250D M-Audio Mobile Pre 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Memory
Overclock.net › Forums › Components › Memory › Crucial Ballistix Tracer DDR2 1066...Is it really running at 1066?