Originally Posted by ArmageddonAsh
Doesnt the PSU go at the top so will the drives be able to reach the PSU connections?
Do you have any cable management planned?
Yes, yes, and yes.
The cables will all be run from the PSU to the front panel via a false bottom.
If you skip back a few pages you will see the post for it but here is the PERMALINK
to the post.
It's not completed, yet. I still need to chop a side off where the motherboard tray is.
The way the cables are gonna route... Kinda difficult to explain but I will try.
You know where the PSU is, the motherboard tray, and you can imagine the false bottom (on the bottom, duh
The cables will go behind the motherboard tray to up under the false bottom. They will then go either in front of the motherboard (for the front buttons and whatnot), or go to the front of the case or side of the motherboard from there.
Basically, you won't see any cables except for a few inches of the cable sticking out and then plugging into whatever it plugs into. The only wires you will see would be fan wires which will be appropriately routed to reduce visual clutter.