Overclock.net › Forums › Volt Mods › General Volt Mods › OCN's V'mod Squad's, Volt Mod Essentials!
New Posts  All Forums:Forum Nav:

OCN's V'mod Squad's, Volt Mod Essentials! - Page 141

post #1401 of 1500
thumb.gif
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
post #1402 of 1500
Quote:
Originally Posted by CL3P20 View Post

Can you close up of the area just below the DIMM slots? I see 2 phases there.. one is likely for SB. **Also probe the mosfets and caps in this area and sniff for vDIMM  wink.gif
Good call dude... found the PWM part right where you said and the datasheet is readily available, once again thank you!

I never expected to see a PWM controller in a SOP8 package, I always look for larger IC's
Edited by mllrkllr88 - 5/22/16 at 3:50pm
24/7 BENCH
(9 items)
 
  
CPUCPUMotherboardGraphics
[LGA115x] 7700K, 7350k, G3258 [LGA2066] 7940X, 7740X [OCF FTW] X299 OCF, Z170M OCF, Z97 OCF E-Power, G-Power, H-Power...WTB A-Power 
RAMCoolingCoolingPower
B-DIE, HYKO, PSC, MFR Kingpin Venom 6.66 2x360 RAD Custom Loop Seasonic Prime Platinum 1200W 
Case
Dimastech Easy V3.0 
  hide details  
Reply
24/7 BENCH
(9 items)
 
  
CPUCPUMotherboardGraphics
[LGA115x] 7700K, 7350k, G3258 [LGA2066] 7940X, 7740X [OCF FTW] X299 OCF, Z170M OCF, Z97 OCF E-Power, G-Power, H-Power...WTB A-Power 
RAMCoolingCoolingPower
B-DIE, HYKO, PSC, MFR Kingpin Venom 6.66 2x360 RAD Custom Loop Seasonic Prime Platinum 1200W 
Case
Dimastech Easy V3.0 
  hide details  
Reply
post #1403 of 1500
I just got a new GTX285 Matrix, I have been looking for this card for a while now and im stoked. Unfortunately I still need to figure out OCP, the IMAX2 trace goes directly to a via from the PWM pin so its going to be tricky figuring out where it goes. I took my time with this one...

24/7 BENCH
(9 items)
 
  
CPUCPUMotherboardGraphics
[LGA115x] 7700K, 7350k, G3258 [LGA2066] 7940X, 7740X [OCF FTW] X299 OCF, Z170M OCF, Z97 OCF E-Power, G-Power, H-Power...WTB A-Power 
RAMCoolingCoolingPower
B-DIE, HYKO, PSC, MFR Kingpin Venom 6.66 2x360 RAD Custom Loop Seasonic Prime Platinum 1200W 
Case
Dimastech Easy V3.0 
  hide details  
Reply
24/7 BENCH
(9 items)
 
  
CPUCPUMotherboardGraphics
[LGA115x] 7700K, 7350k, G3258 [LGA2066] 7940X, 7740X [OCF FTW] X299 OCF, Z170M OCF, Z97 OCF E-Power, G-Power, H-Power...WTB A-Power 
RAMCoolingCoolingPower
B-DIE, HYKO, PSC, MFR Kingpin Venom 6.66 2x360 RAD Custom Loop Seasonic Prime Platinum 1200W 
Case
Dimastech Easy V3.0 
  hide details  
Reply
post #1404 of 1500
good looking mod bro biggrin.gif
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4930K Rampage IV Gene SLI Evga GTX 780 Classy 16Gb TeamX2400c9 
Hard DriveCoolingOSMonitor
Samsung 840 Pro/ Hitachi Deskstar 1TB  H20 (NexXxoS 420+280) w7x64 VG248QE 
KeyboardPowerMouseAudio
Logitech G110 SuperNOVA 1300 G2 G502 Proteus Core Foobar2K/WASAPI >NuForce Icon HDP >Crack with S... 
  hide details  
Reply
post #1405 of 1500
That looks real nice. thumb.gif

//////

Anyone know the hardmod for the 7950/7970? I'm looking to zombify my dead 7950 TF3 (7970 PCB with 7 power phases) and put it's vrm section on one of my GTX 285's.

I know how to do the OCP mod but the vgpu mod is a bit odd since it uses two Vsen pins instead of just one so I'm not quite sure what to do.

Thanks.
The Banshee
(23 items)
 
Under the DICE
(17 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 @ 3.8GHz ASRock X370 Taichi GTX 780 Ti SLI @ 1100/1250 1.063V G.SKILL Trident Z B-Die @ 3466 C14 
Hard DriveHard DriveCoolingCooling
Corsair Force LS 120GB WD Blue 1TB Phobya UC-2 LT XSPC Razor GTX 780 Ti Waterblock w/ Backplate 
CoolingCoolingCoolingCooling
Darkside LP 360mm Radiator Alphacool ST30 240mm Radiator Darkside D5 Vario @ 12V Setting 5 Bitspower Z-Multi 150 Red Reservoir  
CoolingCoolingOSMonitor
Darkside (TFC) 3/8 ID X 5/8 OD Red UV tubing TFC Black straight barb fittings Windows 10 Pro 64-bit LG 25UM57-P 
KeyboardPowerCaseMouse
Thermaltake Challenger  EVGA 1300 G2 Fractal Design Arc XL Evga Torq X3 
Mouse PadAudioOther
Steel series QCK+ Turtle Beach X12 Logitech G27 
CPUCPUCPUCPU
1151: 7350K, 6320 (743 XTU) 1150: i7 4770K 939 & 754: Many Athlon's, Opteron's & Sempron's  775/771: Many C2's, Pentiums, Celerons & Xeons 
CPUCPUMotherboardGraphics
1366: i7 920 D0 and many 4c & 6c Xeon's A bunch more Slot 1, S370 & S462/A CPU's. Z170M OCF & Z87 OCF + many more. Waaaay too many to list... 
RAMCoolingCoolingCooling
A table full of SDR, DDR1, DDR2 & DDR3 Bartx DICE/LN2 CPU Pot Sub-zero A/C waterchiller (-26C) CM Hyper 212+ (Troubleshooting) 
OSMonitorPowerCase
All of them. ;) Samsung S20B300 Evga SuperNova 850 B2 Homemade wooden test bench 
Mouse
Microsoft comfort mouse 3000 
  hide details  
Reply
The Banshee
(23 items)
 
Under the DICE
(17 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 @ 3.8GHz ASRock X370 Taichi GTX 780 Ti SLI @ 1100/1250 1.063V G.SKILL Trident Z B-Die @ 3466 C14 
Hard DriveHard DriveCoolingCooling
Corsair Force LS 120GB WD Blue 1TB Phobya UC-2 LT XSPC Razor GTX 780 Ti Waterblock w/ Backplate 
CoolingCoolingCoolingCooling
Darkside LP 360mm Radiator Alphacool ST30 240mm Radiator Darkside D5 Vario @ 12V Setting 5 Bitspower Z-Multi 150 Red Reservoir  
CoolingCoolingOSMonitor
Darkside (TFC) 3/8 ID X 5/8 OD Red UV tubing TFC Black straight barb fittings Windows 10 Pro 64-bit LG 25UM57-P 
KeyboardPowerCaseMouse
Thermaltake Challenger  EVGA 1300 G2 Fractal Design Arc XL Evga Torq X3 
Mouse PadAudioOther
Steel series QCK+ Turtle Beach X12 Logitech G27 
CPUCPUCPUCPU
1151: 7350K, 6320 (743 XTU) 1150: i7 4770K 939 & 754: Many Athlon's, Opteron's & Sempron's  775/771: Many C2's, Pentiums, Celerons & Xeons 
CPUCPUMotherboardGraphics
1366: i7 920 D0 and many 4c & 6c Xeon's A bunch more Slot 1, S370 & S462/A CPU's. Z170M OCF & Z87 OCF + many more. Waaaay too many to list... 
RAMCoolingCoolingCooling
A table full of SDR, DDR1, DDR2 & DDR3 Bartx DICE/LN2 CPU Pot Sub-zero A/C waterchiller (-26C) CM Hyper 212+ (Troubleshooting) 
OSMonitorPowerCase
All of them. ;) Samsung S20B300 Evga SuperNova 850 B2 Homemade wooden test bench 
Mouse
Microsoft comfort mouse 3000 
  hide details  
Reply
post #1406 of 1500
Quote:
Originally Posted by DR4G00N View Post

That looks real nice. thumb.gif

//////

Anyone know the hardmod for the 7950/7970? I'm looking to zombify my dead 7950 TF3 (7970 PCB with 7 power phases) and put it's vrm section on one of my GTX 285's.

I know how to do the OCP mod but the vgpu mod is a bit odd since it uses two Vsen pins instead of just one so I'm not quite sure what to do.

Thanks.

Thanks for your kind words guys!!

If your looking to do a zombie from a card there is more to it than just cutting and hooking up power. You have to power up and then enable the PWM which usually means providing both 5v and 3.3v to the VRM controller circuitry. First stop is the "Need a zombie?" thread: http://forum.kingpincooling.com/showthread.php?t=980&highlight=zombie

You want to go read this whole thread, tons of info about how to create an ext power from a card. The vmod on 7950 is the least of your worries at this point...unless you the LOD circuits for PWM all figured out and such. As for the vmod on 7950, tell us the IC then maybe we can help thumb.gif
24/7 BENCH
(9 items)
 
  
CPUCPUMotherboardGraphics
[LGA115x] 7700K, 7350k, G3258 [LGA2066] 7940X, 7740X [OCF FTW] X299 OCF, Z170M OCF, Z97 OCF E-Power, G-Power, H-Power...WTB A-Power 
RAMCoolingCoolingPower
B-DIE, HYKO, PSC, MFR Kingpin Venom 6.66 2x360 RAD Custom Loop Seasonic Prime Platinum 1200W 
Case
Dimastech Easy V3.0 
  hide details  
Reply
24/7 BENCH
(9 items)
 
  
CPUCPUMotherboardGraphics
[LGA115x] 7700K, 7350k, G3258 [LGA2066] 7940X, 7740X [OCF FTW] X299 OCF, Z170M OCF, Z97 OCF E-Power, G-Power, H-Power...WTB A-Power 
RAMCoolingCoolingPower
B-DIE, HYKO, PSC, MFR Kingpin Venom 6.66 2x360 RAD Custom Loop Seasonic Prime Platinum 1200W 
Case
Dimastech Easy V3.0 
  hide details  
Reply
post #1407 of 1500
Quote:
Originally Posted by mllrkllr88 View Post

Thanks for your kind words guys!!

If your looking to do a zombie from a card there is more to it than just cutting and hooking up power. You have to power up and then enable the PWM which usually means providing both 5v and 3.3v to the VRM controller circuitry. First stop is the "Need a zombie?" thread: http://forum.kingpincooling.com/showthread.php?t=980&highlight=zombie

You want to go read this whole thread, tons of info about how to create an ext power from a card. The vmod on 7950 is the least of your worries at this point...unless you the LOD circuits for PWM all figured out and such. As for the vmod on 7950, tell us the IC then maybe we can help thumb.gif
Yeah, I read through that thread a few days ago. Plenty of good info there so I get the basic gist of it now... which is the reason why I'm even thinking about doing this. biggrin.gif

The IC is an CHL8228G:


I think I figured it out after poking around some more, (couldn't find a good pic of the ic so I shot my own).



VSEN_L2 is actually for the MEM so I can ignore that since it won't be used for the zombie. I will probably need to cut the trace for VR_READY_L2 too so the PWM will function without the mem phase.
Edited by DR4G00N - 6/10/16 at 2:26pm
The Banshee
(23 items)
 
Under the DICE
(17 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 @ 3.8GHz ASRock X370 Taichi GTX 780 Ti SLI @ 1100/1250 1.063V G.SKILL Trident Z B-Die @ 3466 C14 
Hard DriveHard DriveCoolingCooling
Corsair Force LS 120GB WD Blue 1TB Phobya UC-2 LT XSPC Razor GTX 780 Ti Waterblock w/ Backplate 
CoolingCoolingCoolingCooling
Darkside LP 360mm Radiator Alphacool ST30 240mm Radiator Darkside D5 Vario @ 12V Setting 5 Bitspower Z-Multi 150 Red Reservoir  
CoolingCoolingOSMonitor
Darkside (TFC) 3/8 ID X 5/8 OD Red UV tubing TFC Black straight barb fittings Windows 10 Pro 64-bit LG 25UM57-P 
KeyboardPowerCaseMouse
Thermaltake Challenger  EVGA 1300 G2 Fractal Design Arc XL Evga Torq X3 
Mouse PadAudioOther
Steel series QCK+ Turtle Beach X12 Logitech G27 
CPUCPUCPUCPU
1151: 7350K, 6320 (743 XTU) 1150: i7 4770K 939 & 754: Many Athlon's, Opteron's & Sempron's  775/771: Many C2's, Pentiums, Celerons & Xeons 
CPUCPUMotherboardGraphics
1366: i7 920 D0 and many 4c & 6c Xeon's A bunch more Slot 1, S370 & S462/A CPU's. Z170M OCF & Z87 OCF + many more. Waaaay too many to list... 
RAMCoolingCoolingCooling
A table full of SDR, DDR1, DDR2 & DDR3 Bartx DICE/LN2 CPU Pot Sub-zero A/C waterchiller (-26C) CM Hyper 212+ (Troubleshooting) 
OSMonitorPowerCase
All of them. ;) Samsung S20B300 Evga SuperNova 850 B2 Homemade wooden test bench 
Mouse
Microsoft comfort mouse 3000 
  hide details  
Reply
The Banshee
(23 items)
 
Under the DICE
(17 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 @ 3.8GHz ASRock X370 Taichi GTX 780 Ti SLI @ 1100/1250 1.063V G.SKILL Trident Z B-Die @ 3466 C14 
Hard DriveHard DriveCoolingCooling
Corsair Force LS 120GB WD Blue 1TB Phobya UC-2 LT XSPC Razor GTX 780 Ti Waterblock w/ Backplate 
CoolingCoolingCoolingCooling
Darkside LP 360mm Radiator Alphacool ST30 240mm Radiator Darkside D5 Vario @ 12V Setting 5 Bitspower Z-Multi 150 Red Reservoir  
CoolingCoolingOSMonitor
Darkside (TFC) 3/8 ID X 5/8 OD Red UV tubing TFC Black straight barb fittings Windows 10 Pro 64-bit LG 25UM57-P 
KeyboardPowerCaseMouse
Thermaltake Challenger  EVGA 1300 G2 Fractal Design Arc XL Evga Torq X3 
Mouse PadAudioOther
Steel series QCK+ Turtle Beach X12 Logitech G27 
CPUCPUCPUCPU
1151: 7350K, 6320 (743 XTU) 1150: i7 4770K 939 & 754: Many Athlon's, Opteron's & Sempron's  775/771: Many C2's, Pentiums, Celerons & Xeons 
CPUCPUMotherboardGraphics
1366: i7 920 D0 and many 4c & 6c Xeon's A bunch more Slot 1, S370 & S462/A CPU's. Z170M OCF & Z87 OCF + many more. Waaaay too many to list... 
RAMCoolingCoolingCooling
A table full of SDR, DDR1, DDR2 & DDR3 Bartx DICE/LN2 CPU Pot Sub-zero A/C waterchiller (-26C) CM Hyper 212+ (Troubleshooting) 
OSMonitorPowerCase
All of them. ;) Samsung S20B300 Evga SuperNova 850 B2 Homemade wooden test bench 
Mouse
Microsoft comfort mouse 3000 
  hide details  
Reply
post #1408 of 1500
Quote:
Originally Posted by DR4G00N View Post


The IC is an CHL8228G:

That's convenient, its an I2C chip so you can just use afterburner extreme once you get the right chip address in ABX
24/7 BENCH
(9 items)
 
  
CPUCPUMotherboardGraphics
[LGA115x] 7700K, 7350k, G3258 [LGA2066] 7940X, 7740X [OCF FTW] X299 OCF, Z170M OCF, Z97 OCF E-Power, G-Power, H-Power...WTB A-Power 
RAMCoolingCoolingPower
B-DIE, HYKO, PSC, MFR Kingpin Venom 6.66 2x360 RAD Custom Loop Seasonic Prime Platinum 1200W 
Case
Dimastech Easy V3.0 
  hide details  
Reply
24/7 BENCH
(9 items)
 
  
CPUCPUMotherboardGraphics
[LGA115x] 7700K, 7350k, G3258 [LGA2066] 7940X, 7740X [OCF FTW] X299 OCF, Z170M OCF, Z97 OCF E-Power, G-Power, H-Power...WTB A-Power 
RAMCoolingCoolingPower
B-DIE, HYKO, PSC, MFR Kingpin Venom 6.66 2x360 RAD Custom Loop Seasonic Prime Platinum 1200W 
Case
Dimastech Easy V3.0 
  hide details  
Reply
post #1409 of 1500
err...just remembered this is for zombie so you cant use I2C.

Well, I don't see a full datasheet for this part, only "brief" so its hard to tell. And since the card is broken you cant very well go trying things easily, I suggest you get your card working by putting 3.3v directly on the PCIe connector then you can try things to increase volts. I would start with pin 6 and see if you get a response.
24/7 BENCH
(9 items)
 
  
CPUCPUMotherboardGraphics
[LGA115x] 7700K, 7350k, G3258 [LGA2066] 7940X, 7740X [OCF FTW] X299 OCF, Z170M OCF, Z97 OCF E-Power, G-Power, H-Power...WTB A-Power 
RAMCoolingCoolingPower
B-DIE, HYKO, PSC, MFR Kingpin Venom 6.66 2x360 RAD Custom Loop Seasonic Prime Platinum 1200W 
Case
Dimastech Easy V3.0 
  hide details  
Reply
24/7 BENCH
(9 items)
 
  
CPUCPUMotherboardGraphics
[LGA115x] 7700K, 7350k, G3258 [LGA2066] 7940X, 7740X [OCF FTW] X299 OCF, Z170M OCF, Z97 OCF E-Power, G-Power, H-Power...WTB A-Power 
RAMCoolingCoolingPower
B-DIE, HYKO, PSC, MFR Kingpin Venom 6.66 2x360 RAD Custom Loop Seasonic Prime Platinum 1200W 
Case
Dimastech Easy V3.0 
  hide details  
Reply
post #1410 of 1500
Quote:
Originally Posted by mllrkllr88 View Post

err...just remembered this is for zombie so you cant use I2C.

Well, I don't see a full datasheet for this part, only "brief" so its hard to tell. And since the card is broken you cant very well go trying things easily, I suggest you get your card working by putting 3.3v directly on the PCIe connector then you can try things to increase volts. I would start with pin 6 and see if you get a response.
I just put it in an old mobo I had to give it power. The good news is that all the gpu phases work fine and all output .999-1.001V, the bad news is that putting a 1K VR on pin 6 didn't work. When without power I can adjust the resistance just fine (Eg. from 6.7 ohm to <5 ohm) but once it gets power the resistance of pin 6 to ground drastically increases to 17.3 Mohm and adjusting the VR does nothing. confused.gif

I'll get around to replacing that resistor sometime and see if it makes a difference.
The Banshee
(23 items)
 
Under the DICE
(17 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 @ 3.8GHz ASRock X370 Taichi GTX 780 Ti SLI @ 1100/1250 1.063V G.SKILL Trident Z B-Die @ 3466 C14 
Hard DriveHard DriveCoolingCooling
Corsair Force LS 120GB WD Blue 1TB Phobya UC-2 LT XSPC Razor GTX 780 Ti Waterblock w/ Backplate 
CoolingCoolingCoolingCooling
Darkside LP 360mm Radiator Alphacool ST30 240mm Radiator Darkside D5 Vario @ 12V Setting 5 Bitspower Z-Multi 150 Red Reservoir  
CoolingCoolingOSMonitor
Darkside (TFC) 3/8 ID X 5/8 OD Red UV tubing TFC Black straight barb fittings Windows 10 Pro 64-bit LG 25UM57-P 
KeyboardPowerCaseMouse
Thermaltake Challenger  EVGA 1300 G2 Fractal Design Arc XL Evga Torq X3 
Mouse PadAudioOther
Steel series QCK+ Turtle Beach X12 Logitech G27 
CPUCPUCPUCPU
1151: 7350K, 6320 (743 XTU) 1150: i7 4770K 939 & 754: Many Athlon's, Opteron's & Sempron's  775/771: Many C2's, Pentiums, Celerons & Xeons 
CPUCPUMotherboardGraphics
1366: i7 920 D0 and many 4c & 6c Xeon's A bunch more Slot 1, S370 & S462/A CPU's. Z170M OCF & Z87 OCF + many more. Waaaay too many to list... 
RAMCoolingCoolingCooling
A table full of SDR, DDR1, DDR2 & DDR3 Bartx DICE/LN2 CPU Pot Sub-zero A/C waterchiller (-26C) CM Hyper 212+ (Troubleshooting) 
OSMonitorPowerCase
All of them. ;) Samsung S20B300 Evga SuperNova 850 B2 Homemade wooden test bench 
Mouse
Microsoft comfort mouse 3000 
  hide details  
Reply
The Banshee
(23 items)
 
Under the DICE
(17 items)
 
 
CPUMotherboardGraphicsRAM
Ryzen 7 1700 @ 3.8GHz ASRock X370 Taichi GTX 780 Ti SLI @ 1100/1250 1.063V G.SKILL Trident Z B-Die @ 3466 C14 
Hard DriveHard DriveCoolingCooling
Corsair Force LS 120GB WD Blue 1TB Phobya UC-2 LT XSPC Razor GTX 780 Ti Waterblock w/ Backplate 
CoolingCoolingCoolingCooling
Darkside LP 360mm Radiator Alphacool ST30 240mm Radiator Darkside D5 Vario @ 12V Setting 5 Bitspower Z-Multi 150 Red Reservoir  
CoolingCoolingOSMonitor
Darkside (TFC) 3/8 ID X 5/8 OD Red UV tubing TFC Black straight barb fittings Windows 10 Pro 64-bit LG 25UM57-P 
KeyboardPowerCaseMouse
Thermaltake Challenger  EVGA 1300 G2 Fractal Design Arc XL Evga Torq X3 
Mouse PadAudioOther
Steel series QCK+ Turtle Beach X12 Logitech G27 
CPUCPUCPUCPU
1151: 7350K, 6320 (743 XTU) 1150: i7 4770K 939 & 754: Many Athlon's, Opteron's & Sempron's  775/771: Many C2's, Pentiums, Celerons & Xeons 
CPUCPUMotherboardGraphics
1366: i7 920 D0 and many 4c & 6c Xeon's A bunch more Slot 1, S370 & S462/A CPU's. Z170M OCF & Z87 OCF + many more. Waaaay too many to list... 
RAMCoolingCoolingCooling
A table full of SDR, DDR1, DDR2 & DDR3 Bartx DICE/LN2 CPU Pot Sub-zero A/C waterchiller (-26C) CM Hyper 212+ (Troubleshooting) 
OSMonitorPowerCase
All of them. ;) Samsung S20B300 Evga SuperNova 850 B2 Homemade wooden test bench 
Mouse
Microsoft comfort mouse 3000 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: General Volt Mods
Overclock.net › Forums › Volt Mods › General Volt Mods › OCN's V'mod Squad's, Volt Mod Essentials!