Overclock.net banner

DFI NF4 Sli-Dr ?'s

630 views 10 replies 6 participants last post by  decimator 
#1 ·
I Have my dfi sli-dr and i cant remember what color slots to use for the memory? and also what sata ports should i use. Sorry this is my first amd build. Also if there is any other things you guys can let me in on it would be much apreciated. THANKS and Merry Christmas
 
#7 ·
Orange w 623-3 for TCCD and it seems some have better results With Crucial/Micron with that.
Yellow with 623-2 for others like BH and UTT
There is a new BIOS ver out since but I don't have the whats what yet
 
#9 ·
Lose the cheepo RAM... it will hold back the Redline.
The Redline
1, 623-2 Yellow and you should get a fan on it to cool with the high vdimm it requires.
 
#11 ·
Well, I would just go with BIOS 623-2 and place the value RAM in the orange slots until you put the Redline in (in the yellow slots) and take out the value RAM (unless you wanna play it safe and use 623-3 until you put the Redline in, but I think that's a big hassle). Also, make sure you set the 4v jumper when you put the Redline in so that they can use the high voltages.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top