Originally Posted by AnG3L
Thats a very clean and nice mod man! I was curious about the airflow on that case cause of its lack of fans on the front so please post some temps if you can or your impressions in case with other ...cases!
Good job mate! +rep
Overall I am happy with my airflow in the case, that is with my modding. I did not try the case at it's original stage. Adding the two fans in the side panel, even though it's going through the RAD is a great help with air flow. I also added a 80mm fan to the front for more aire flow.
EVGA x58 SLI Board, i7 940 CPU OC'd to 3.69 and a EVGA 295 GPU are all in the same loop. I am sure if I pulled my GPU off the loop then I could get lower CPU temps, but I am happy with how it is running currently.
Here are some temps of my system, I have a i7 940 CPU OC'd down to 3.69 currently . Do not see a reason to put it at 4.0 although it is saved in my BIOS setting if wanting to raise it again.
Temp on Idle
Didn't have time to run it under full load for a long time, here is just 12 minutes using prime 95.
Here is a shot of when my system was on air
and in my HAF922 Case.