Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › Project: Obsidian 800D Build
New Posts  All Forums:Forum Nav:

Project: Obsidian 800D Build - Page 7

post #61 of 91
Quote:
Originally Posted by triggs75 View Post
Here is what I posted a few pages back:

Yes it would be possible if you have the right power supply and you would have to have it on the side of were the cables do NOT come out of the power supply.

Meaning, I would have about 1 to 2mm's from my HX850 corsair PSU, but if I had a 1000 watt PSU then no it would not fit.

I agree you would have better luck with placing dual 240 rads down there as I have seen the one on xtremesystems as well. That is actually where I got the idea of how to place my bottom RAD.

What would be great is get the solid panel from corsair for $20 and place the 240 RAD grills on both sides then put your two 240 RADS down there and cut and create your own window in the solid panel.

Here is a pic measuring the distance. You would have a tenth of an inch in between my HX850 PSU.

or get one of these and have no worries. http://www.performance-pcs.com/catal...ducts_id=23950





Chad
man i ended getting a used 800 D for $100. this is what I am doing. nice build by the way!!!!!!!!!!
i still need to do a few things like drill holes for the inlet outlet of the rad to the gpu/filter at the bottom. the bottom came the way it is. might need to do a few cuts...........and yeah.....my dremel just stopped working too!

thats a Black Ice GTX 360 with 3 ultra kazes. so to answer my own question. yes you can fit a triple rad at the bottom. the thermochill pa 120.3 will not fit!!!!!




post #62 of 91
Quote:
Originally Posted by Clox View Post
Hey Triggs, really loving your build which I saw first on XS. Nice work, I have an 800D sitting beside me which I got on new years eve and the more I look at all the 800D builds the more I jonez to get mine together. I had a Feser X-120 show up yesterday which I got mounted in the bottom area with just removing the lower cover but the fail was upon me tonight when I realized that my PA120.3 does NOT align properly (incorrect fan spacing) so now I have to sell it off and get one that fits!
Anyways, thanks for all the pics!
i got a thermochill pa 120.3 mounted on top and right now and only 4 screws are holding it. what ima do is drill 4 more holes and just have 8 screws holding it down. im not gonna worry about the outer screws (2 on one side and the other 2 on the other end) i think 8 screws is more than enough to hold it up. and 4 might do the job too! its a great rad. id keep it!!!
post #63 of 91
Thread Starter 
Quote:
Originally Posted by Carlitos714 View Post
man i ended getting a used 800 D for $100. this is what I am doing. nice build by the way!!!!!!!!!!
i still need to do a few things like drill holes for the inlet outlet of the rad to the gpu/filter at the bottom. the bottom came the way it is. might need to do a few cuts...........and yeah.....my dremel just stopped working too!

thats a Black Ice GTX 360 with 3 ultra kazes. so to answer my own question. yes you can fit a triple rad at the bottom. the thermochill pa 120.3 will not fit!!!!!
Glad to see you were able to get a 360 down there. Looking good so far, you should create a build log and put it in your sig so people can see how your system comes along.

Quote:
Originally Posted by Carlitos714 View Post
i got a thermochill pa 120.3 mounted on top and right now and only 4 screws are holding it. what ima do is drill 4 more holes and just have 8 screws holding it down. im not gonna worry about the outer screws (2 on one side and the other 2 on the other end) i think 8 screws is more than enough to hold it up. and 4 might do the job too! its a great rad. id keep it!!!
In my HAF922 build, I had only 4 screws holding up my top 360 RAD as the XSPC RAD fan holes were off.

Chad
    
CPUMotherboardGraphicsRAM
i7 940 OC'd to 4.0 Evga X58 Sli Evga 580 GTX DOMINATOR 6GB (3x2GB) 
Hard DriveCoolingOSMonitor
OCZ Vertex 2 (2x180) Raid 0 Liquid Baby Win7 Ultimate x64 Dell 2707WFP 
KeyboardPowerCaseMouse
Corsair Vengeance K90  CORSAIR 850W (modular) Obsidian 800D Razer Lachesis  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 940 OC'd to 4.0 Evga X58 Sli Evga 580 GTX DOMINATOR 6GB (3x2GB) 
Hard DriveCoolingOSMonitor
OCZ Vertex 2 (2x180) Raid 0 Liquid Baby Win7 Ultimate x64 Dell 2707WFP 
KeyboardPowerCaseMouse
Corsair Vengeance K90  CORSAIR 850W (modular) Obsidian 800D Razer Lachesis  
  hide details  
Reply
post #64 of 91
Quote:
Originally Posted by triggs75 View Post
Glad to see you were able to get a 360 down there. Looking good so far, you should create a build log and put it in your sig so people can see how your system comes along.



In my HAF922 build, I had only 4 screws holding up my top 360 RAD as the XSPC RAD fan holes were off.

Chad
yeah im put my build log up soon. hey man good luck with your computer. I love the red!!!
post #65 of 91
Quote:
Originally Posted by triggs75 View Post
Thanks and that sucks on your build. Hope you get the correct spacing on your next RAD.
Chad
Hehe, yeah my own mistake. I got so caught up in ordering parts and everything I overlooked the fact that I had to mod my Cosmos S to fit it previously. Thanks, the new one has the correct fan spacing and it should arrive tomorrow. Hopefully have it setup by the end of this weekend.

Quote:
Originally Posted by Carlitos714 View Post
i got a thermochill pa 120.3 mounted on top and right now and only 4 screws are holding it. what ima do is drill 4 more holes and just have 8 screws holding it down. im not gonna worry about the outer screws (2 on one side and the other 2 on the other end) i think 8 screws is more than enough to hold it up. and 4 might do the job too! its a great rad. id keep it!!!
Thanks for the suggestion but I really don't want to make to many cuts or anything with this one and I want it to be asthetically pleasing for sure. My PA120.3 is sold pending payment and I have a Feser X360 en route which has the correct fan spacing and will mount up top perfectly with no drilling. I have added some handles and I think that's as far as I will go with cutting/drilling this case...... For now
Ж Prometheus Ж
(12 items)
 
  
CPUMotherboardGraphicsRAM
i7 7700K ROG Maximus IX Hero  EVGA GTX 1080 Ti FE G.Skill TridentZ RGB 
Hard DriveOSMonitorKeyboard
Samsung M2 960 Pro 512, Samsung 840 Pro, 4GB WD... Windows 10 Pro Acer XB271HU Vengeance K95 RGB-MX Red 
PowerCaseMouseMouse Pad
Seasonic SS1000XP Obsidian 800D modified Razer Deathadder Chroma Razer Sphex 
  hide details  
Reply
Ж Prometheus Ж
(12 items)
 
  
CPUMotherboardGraphicsRAM
i7 7700K ROG Maximus IX Hero  EVGA GTX 1080 Ti FE G.Skill TridentZ RGB 
Hard DriveOSMonitorKeyboard
Samsung M2 960 Pro 512, Samsung 840 Pro, 4GB WD... Windows 10 Pro Acer XB271HU Vengeance K95 RGB-MX Red 
PowerCaseMouseMouse Pad
Seasonic SS1000XP Obsidian 800D modified Razer Deathadder Chroma Razer Sphex 
  hide details  
Reply
post #66 of 91
Sorry, double post.....
Edited by Clox - 1/21/10 at 1:10pm
Ж Prometheus Ж
(12 items)
 
  
CPUMotherboardGraphicsRAM
i7 7700K ROG Maximus IX Hero  EVGA GTX 1080 Ti FE G.Skill TridentZ RGB 
Hard DriveOSMonitorKeyboard
Samsung M2 960 Pro 512, Samsung 840 Pro, 4GB WD... Windows 10 Pro Acer XB271HU Vengeance K95 RGB-MX Red 
PowerCaseMouseMouse Pad
Seasonic SS1000XP Obsidian 800D modified Razer Deathadder Chroma Razer Sphex 
  hide details  
Reply
Ж Prometheus Ж
(12 items)
 
  
CPUMotherboardGraphicsRAM
i7 7700K ROG Maximus IX Hero  EVGA GTX 1080 Ti FE G.Skill TridentZ RGB 
Hard DriveOSMonitorKeyboard
Samsung M2 960 Pro 512, Samsung 840 Pro, 4GB WD... Windows 10 Pro Acer XB271HU Vengeance K95 RGB-MX Red 
PowerCaseMouseMouse Pad
Seasonic SS1000XP Obsidian 800D modified Razer Deathadder Chroma Razer Sphex 
  hide details  
Reply
post #67 of 91
Thread Starter 
Not really part of my build, but it's where my build lives

Since the Obsidian is too big to place anywhere else but the floo, I decided to make it a home.

I put a couple of 2x6's together, through a shelf top on it and placed some coolcasters under it for mobility oh and slapped a Lamptron Case handle on the front of it.

and not sure why my carpet looks white but oh well.



Chad
    
CPUMotherboardGraphicsRAM
i7 940 OC'd to 4.0 Evga X58 Sli Evga 580 GTX DOMINATOR 6GB (3x2GB) 
Hard DriveCoolingOSMonitor
OCZ Vertex 2 (2x180) Raid 0 Liquid Baby Win7 Ultimate x64 Dell 2707WFP 
KeyboardPowerCaseMouse
Corsair Vengeance K90  CORSAIR 850W (modular) Obsidian 800D Razer Lachesis  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 940 OC'd to 4.0 Evga X58 Sli Evga 580 GTX DOMINATOR 6GB (3x2GB) 
Hard DriveCoolingOSMonitor
OCZ Vertex 2 (2x180) Raid 0 Liquid Baby Win7 Ultimate x64 Dell 2707WFP 
KeyboardPowerCaseMouse
Corsair Vengeance K90  CORSAIR 850W (modular) Obsidian 800D Razer Lachesis  
  hide details  
Reply
post #68 of 91
Quote:
Components;
»Obsidian 800D
»CPU: Intel Core i7 940 OC'd to 4.0
»Motherboard: Evga X58
»EVGA GeForce GTX 295
»CORSAIR DOMINATOR 6GB (3x2GB)
Is that Dominator GTX ram?
    
CPUMotherboardGraphicsRAM
Core i7 920 4ghz 1.25v Evga Classified E760/E762 Evga Gtx 480 + Galaxy GTX 480 SLI 6GB Corsair Dominator GT 1600mhz 
Hard DriveOSMonitorKeyboard
Crucial C300 256Gb, Samsung 7200rpm 320gb, 2x W... Windows 7 64-bit Home premium Dell U2410 1920x1200 Wireless Logitech 
PowerCaseMouseMouse Pad
Antec Quatro 1200w Corsair 800D Razer Death Adder Office Depot thingy 
AudioAudio
Asus Xonar STX Sennheiser HD555's 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 920 4ghz 1.25v Evga Classified E760/E762 Evga Gtx 480 + Galaxy GTX 480 SLI 6GB Corsair Dominator GT 1600mhz 
Hard DriveOSMonitorKeyboard
Crucial C300 256Gb, Samsung 7200rpm 320gb, 2x W... Windows 7 64-bit Home premium Dell U2410 1920x1200 Wireless Logitech 
PowerCaseMouseMouse Pad
Antec Quatro 1200w Corsair 800D Razer Death Adder Office Depot thingy 
AudioAudio
Asus Xonar STX Sennheiser HD555's 
  hide details  
Reply
post #69 of 91
Thread Starter 
Quote:
Originally Posted by Willanhanyard View Post
Is that Dominator GTX ram?
It's the - Corsair Dominator 6GB (3×2GB) 1600MHz PC3-12800 CM3X2G1600C8D

I placed the Dominator Extended Fins on it. Here

https://shop.corsair.com/store/item_...spx?id=1000790

Chad
Edited by triggs75 - 1/21/10 at 8:28pm
    
CPUMotherboardGraphicsRAM
i7 940 OC'd to 4.0 Evga X58 Sli Evga 580 GTX DOMINATOR 6GB (3x2GB) 
Hard DriveCoolingOSMonitor
OCZ Vertex 2 (2x180) Raid 0 Liquid Baby Win7 Ultimate x64 Dell 2707WFP 
KeyboardPowerCaseMouse
Corsair Vengeance K90  CORSAIR 850W (modular) Obsidian 800D Razer Lachesis  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 940 OC'd to 4.0 Evga X58 Sli Evga 580 GTX DOMINATOR 6GB (3x2GB) 
Hard DriveCoolingOSMonitor
OCZ Vertex 2 (2x180) Raid 0 Liquid Baby Win7 Ultimate x64 Dell 2707WFP 
KeyboardPowerCaseMouse
Corsair Vengeance K90  CORSAIR 850W (modular) Obsidian 800D Razer Lachesis  
  hide details  
Reply
post #70 of 91
What LED's did you use for your EK block? The diffusion you have there is great!
Johnny 5
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7 920 @ 3.2 GHz EVGA X58 Classified EVGA GTX 295 Corsair XMS 3 6 GB 
Hard DriveHard DriveOptical DriveCooling
Seagate 500 GB 7200 RPM Samsung 830 128 GB Samsung Bluray drive All under water 
MonitorMonitorPowerCase
HP 2711x 27" Samsung 226BW 22" Antec 850 Case Labs M10 
  hide details  
Reply
Johnny 5
(16 items)
 
  
CPUMotherboardGraphicsRAM
I7 920 @ 3.2 GHz EVGA X58 Classified EVGA GTX 295 Corsair XMS 3 6 GB 
Hard DriveHard DriveOptical DriveCooling
Seagate 500 GB 7200 RPM Samsung 830 128 GB Samsung Bluray drive All under water 
MonitorMonitorPowerCase
HP 2711x 27" Samsung 226BW 22" Antec 850 Case Labs M10 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mod Work Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › Project: Obsidian 800D Build