Overclock.net › Forums › AMD › AMD CPUs › settings!!!
New Posts  All Forums:Forum Nav:

settings!!!

post #1 of 27
Thread Starter 
alright..im at 220fsb, 10.5 or 11 multi, vdimm 2.7, vcore at 1.7, cpu-burn ran all last night, and it still wont pass prime95. it does play cod2 ok...little choppy, due to vid card. any suggestions? ive been workin on this for two weeks...still nothing...

suggestions would help lots!
My System
(13 items)
 
  
CPUMotherboardOSMonitor
amd 3000+ barton 400 asus a7n8x-e deluxe xp pro sp2 phillips 107s 
KeyboardPowerCaseMouse
dtc 420W raidmax cm centurion cac-t05 dtc 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
amd 3000+ barton 400 asus a7n8x-e deluxe xp pro sp2 phillips 107s 
KeyboardPowerCaseMouse
dtc 420W raidmax cm centurion cac-t05 dtc 
  hide details  
Reply
post #2 of 27
That's an Nforce 2 chipset right? Can you run it at 200 x 12? Oh and that 3000+, is it a Sempron?
Money dump
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 7700k 4.8Ghz @ 1.28v Asrock Z170 Extreme4 Sapphire R9 Nano @ Fury X clocks Crucial Ballistix 16GB 2666mhz CL15 
Hard DriveCoolingOSMonitor
Crucial MX300 525GB SSD, Seagate 3TB, Samsung 1TB Noctua NH-U14S Windows 10 Pro 64-bit Samsung U24E590D UHD 
KeyboardPowerCaseMouse
Saitek Eclipse II Seasonic Prime 850w Titanium Corsair Carbide Air 540 Steelseries Xai 
  hide details  
Reply
Money dump
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 7700k 4.8Ghz @ 1.28v Asrock Z170 Extreme4 Sapphire R9 Nano @ Fury X clocks Crucial Ballistix 16GB 2666mhz CL15 
Hard DriveCoolingOSMonitor
Crucial MX300 525GB SSD, Seagate 3TB, Samsung 1TB Noctua NH-U14S Windows 10 Pro 64-bit Samsung U24E590D UHD 
KeyboardPowerCaseMouse
Saitek Eclipse II Seasonic Prime 850w Titanium Corsair Carbide Air 540 Steelseries Xai 
  hide details  
Reply
post #3 of 27
Thread Starter 
i got it to run 200x12...if i crank up the volts i can get it to do 220x12...but will randomly reboot...it is a barton...athlon xp...just like it says down there \\/
My System
(13 items)
 
  
CPUMotherboardOSMonitor
amd 3000+ barton 400 asus a7n8x-e deluxe xp pro sp2 phillips 107s 
KeyboardPowerCaseMouse
dtc 420W raidmax cm centurion cac-t05 dtc 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
amd 3000+ barton 400 asus a7n8x-e deluxe xp pro sp2 phillips 107s 
KeyboardPowerCaseMouse
dtc 420W raidmax cm centurion cac-t05 dtc 
  hide details  
Reply
post #4 of 27
One word RAM. Acquire some good 2x512MB DDR400 with tight timmings (TCCD the best here) and you will go along way to fixing your problem.

edit: the BIOS lets you adjust the multi above x11 yes ? So you have an unlocked core ?
if so then try 210x12 for around the 2.5GHz mark but your memory will need to upgrade.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
3700+Sandiego KACAE DFI LP UT nF4 SLI-D 2 x eVGA6600GT 256Mb 2x512Mb TCCD 
Hard DriveOSKeyboardPower
WD 80Gb SATAII XP Puss Pro Logiteck Multimedia Enermax Noisetaker 485W 
CaseMouse
XG Quantum - modified Logitech MX518 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
3700+Sandiego KACAE DFI LP UT nF4 SLI-D 2 x eVGA6600GT 256Mb 2x512Mb TCCD 
Hard DriveOSKeyboardPower
WD 80Gb SATAII XP Puss Pro Logiteck Multimedia Enermax Noisetaker 485W 
CaseMouse
XG Quantum - modified Logitech MX518 
  hide details  
Reply
post #5 of 27
Thread Starter 
you sure its the ram?? i followed the guide, and ran a divider to make the ram faster than proc...it ran memtest fine...i dont understand why the crap it wont work...maybe it just ownt take a load very well...who knows...once my tax check comes back, i can possibly get new psu, 6800gs, and ram...im looking at about 450 bucks for all three...and i wanna get car parts too!!!! i might not be getting either!!
My System
(13 items)
 
  
CPUMotherboardOSMonitor
amd 3000+ barton 400 asus a7n8x-e deluxe xp pro sp2 phillips 107s 
KeyboardPowerCaseMouse
dtc 420W raidmax cm centurion cac-t05 dtc 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
amd 3000+ barton 400 asus a7n8x-e deluxe xp pro sp2 phillips 107s 
KeyboardPowerCaseMouse
dtc 420W raidmax cm centurion cac-t05 dtc 
  hide details  
Reply
post #6 of 27
Thread Starter 
and yes, i have week 34...week 36 were locked. talk about cutting it close. i still dont know why 13 down clocks to 5...odd. i tried that, wont run stable...almost like it needs more vcore..but i cant and dont wanna go higher than 1.85!! that is just dumb for me to run that...even though i do have copper the size of texas and a fan as big as california on my chip.
My System
(13 items)
 
  
CPUMotherboardOSMonitor
amd 3000+ barton 400 asus a7n8x-e deluxe xp pro sp2 phillips 107s 
KeyboardPowerCaseMouse
dtc 420W raidmax cm centurion cac-t05 dtc 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
amd 3000+ barton 400 asus a7n8x-e deluxe xp pro sp2 phillips 107s 
KeyboardPowerCaseMouse
dtc 420W raidmax cm centurion cac-t05 dtc 
  hide details  
Reply
post #7 of 27
New memory will help. But that barton will top out on air at 2.4ish.
post #8 of 27
Thread Starter 
i have had it at 2.53(220x11.5) tried to step it to 12, but kept rebooting...raised vcore, still nothing...it actually made it to the load screen where you click the icon, then rebooted...but it might be the ram i guess...it is kingston value crap. thanks everyone!!
My System
(13 items)
 
  
CPUMotherboardOSMonitor
amd 3000+ barton 400 asus a7n8x-e deluxe xp pro sp2 phillips 107s 
KeyboardPowerCaseMouse
dtc 420W raidmax cm centurion cac-t05 dtc 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
amd 3000+ barton 400 asus a7n8x-e deluxe xp pro sp2 phillips 107s 
KeyboardPowerCaseMouse
dtc 420W raidmax cm centurion cac-t05 dtc 
  hide details  
Reply
post #9 of 27
Quote:
Originally Posted by popeyenate
and yes, i have week 34...week 36 were locked. talk about cutting it close. i still dont know why 13 down clocks to 5...odd. i tried that, wont run stable...almost like it needs more vcore..but i cant and dont wanna go higher than 1.85!! that is just dumb for me to run that...even though i do have copper the size of texas and a fan as big as california on my chip.
It's the RAM.

You should be looking for 1:1 ratio for the memory with as low timmings as you can go. You should be looking in the 210x12 for 2.52GHz or with good RAM 225x11 for 2.48GHz and upwards.

As for the Vcore 1.85v your going to fry that core. Max you need is 1.8v no more !
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
3700+Sandiego KACAE DFI LP UT nF4 SLI-D 2 x eVGA6600GT 256Mb 2x512Mb TCCD 
Hard DriveOSKeyboardPower
WD 80Gb SATAII XP Puss Pro Logiteck Multimedia Enermax Noisetaker 485W 
CaseMouse
XG Quantum - modified Logitech MX518 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
3700+Sandiego KACAE DFI LP UT nF4 SLI-D 2 x eVGA6600GT 256Mb 2x512Mb TCCD 
Hard DriveOSKeyboardPower
WD 80Gb SATAII XP Puss Pro Logiteck Multimedia Enermax Noisetaker 485W 
CaseMouse
XG Quantum - modified Logitech MX518 
  hide details  
Reply
post #10 of 27
Thread Starter 
my mobo tops out at 220..wont go to 221...lowered the divider so ram didnt choke it off..so i am stuff with 220...i know, it sucks!! and asus is supposed to be good! oh, and i had the vcore at 1.85 a couple times...full load with cpu-burn, never got over 52c...it usually runs at 44 when loaded...right now it runs at 42c...210x11...1.75 vcore...still not stable...maybe my puter sucks!!
My System
(13 items)
 
  
CPUMotherboardOSMonitor
amd 3000+ barton 400 asus a7n8x-e deluxe xp pro sp2 phillips 107s 
KeyboardPowerCaseMouse
dtc 420W raidmax cm centurion cac-t05 dtc 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
amd 3000+ barton 400 asus a7n8x-e deluxe xp pro sp2 phillips 107s 
KeyboardPowerCaseMouse
dtc 420W raidmax cm centurion cac-t05 dtc 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › settings!!!