Originally Posted by PetrolHead
The HT Voltage or the LDT Voltage should only go up to 1.5v max.
I wonder if it could just be the Vcore???
Yes they will allow for a slightly higher HTT, make sure your chipset doesn't overheat as you only have passive cooling!
You are right Petrol, my error, I mistyped. The HT voltage settings are 1.20v (default) and 1.25v. The vcore I do have set to it's max right now at 1.5v, and the chipset voltage is 1.6v (up from the only other setting of 1.5v).
Thanks for the advice on the chipset though. When I use programs like speedfan, mobo monitor, asus probe, etc.... is the "Motherboard Temperature" being read from the northbridge chipset, or somewhere else?
MAXMAXX22 - No I didnt have any problems, although I do not have a RAID setup configured at this time. I have seen recommendations either way in support of either the nVidia or Silicon. It does matter however whether you use the black SATA connections or the red ones on the board.
I am not too familiar with setting up a raid array on this, but I just saw this recent thread with the same problem it seemshttp://www.overclock.net/amd-motherb...e-help-me.html