Originally Posted by EurYnomE
would you say my ram is limiting me or what??
I just raised it to 2.7, started up easy.... i'm thinking about running prime95... just to see how high the temps go, if they are still around 45 i might go a little higher....
Maybe I should try a lower multi and higher fsb??? I've still got mixed thoughts on doing that though, some say low multi high fsb is good... some say the opposite
Bah, I suicided mine at 1.68v for about an hour with no issues
, of course the crossflow in my case combined with my XP-90/92mm is probably the equivelent of a F5 tornado
Anyways, don't be afraid to run a divider on these Venices. I'm at a steep divider right now, things going on in my life have restricted me getting the ram I wanted, so I figured I'd see how well it would perform on a big divider, and they perform great. Not as good as if it was 1:1, but it's WAY better than stock. I would just put it on a divider, and then do your overclocking. If you have DDR400, keep going on the FSB so you can keep the mhz of the ram up there. If your at 270x10, and your ram is running at 200mhz on a divider, and you have decent ram, you can go a little higher and so on and so on. Gotta keep trying