Overclock.net › Forums › Intel › Intel CPUs › Another newbie wanting help
New Posts  All Forums:Forum Nav:

Another newbie wanting help

post #1 of 11
Thread Starter 
im having trouble adjusting the fsb settings for my motherboard cpu
the only option i can change is the cpu host frequancy and nothing much else
i have a 2.4g intel celeron with a asrock P4S61 mobo ive read through just about every forum and i cannot find a soulution to the problem! ive built the pc myself and the mobo is supposed to support overclocking but i cannot adjust anything!
My System
(13 items)
 
  
CPUMotherboard
intel c 2.4ghz asrock P4S61 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboard
intel c 2.4ghz asrock P4S61 
  hide details  
Reply
post #2 of 11
Quote:
Originally Posted by hope4pot
im having trouble adjusting the fsb settings for my motherboard cpu
the only option i can change is the cpu host frequancy and nothing much else
i have a 2.4g intel celeron with a asrock P4S61 mobo ive read through just about every forum and i cannot find a soulution to the problem! ive built the pc myself and the mobo is supposed to support overclocking but i cannot adjust anything!
Do you can enter in frecuency/volt settings???
My Flying PC
(14 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom 2 X4 955 BE rev C GA-970-D3 Nvidia GTX 560 A-Data 8GB 
Hard DriveCoolingOSMonitor
Western Digital, Seagate Thermal Take Contact 30 Windows 7 AOC 1920x1080 
KeyboardPowerCaseMouse
Generic Anlix Thermal take  Generic Esenses 
Mouse PadAudio
Generic Onboard 
  hide details  
Reply
My Flying PC
(14 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom 2 X4 955 BE rev C GA-970-D3 Nvidia GTX 560 A-Data 8GB 
Hard DriveCoolingOSMonitor
Western Digital, Seagate Thermal Take Contact 30 Windows 7 AOC 1920x1080 
KeyboardPowerCaseMouse
Generic Anlix Thermal take  Generic Esenses 
Mouse PadAudio
Generic Onboard 
  hide details  
Reply
post #3 of 11
Thread Starter 
nope it wont let me enter volt settings in it will only give me a page with the system health on!
My System
(13 items)
 
  
CPUMotherboard
intel c 2.4ghz asrock P4S61 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboard
intel c 2.4ghz asrock P4S61 
  hide details  
Reply
post #4 of 11
Quote:
Originally Posted by hope4pot
nope it wont let me enter volt settings in it will only give me a page with the system health on!
I think I found a way to do your OC, this is a very simple Bios.

In your advanced bios setup, try to change the Host frecuency from auto to manual. Then changed the 133 to 134 or more, that will change the FSB for sure. This is almost a propietary board, is green LOL , dont see the function for the volts, at least you probably can oc a bit!!!
My Flying PC
(14 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom 2 X4 955 BE rev C GA-970-D3 Nvidia GTX 560 A-Data 8GB 
Hard DriveCoolingOSMonitor
Western Digital, Seagate Thermal Take Contact 30 Windows 7 AOC 1920x1080 
KeyboardPowerCaseMouse
Generic Anlix Thermal take  Generic Esenses 
Mouse PadAudio
Generic Onboard 
  hide details  
Reply
My Flying PC
(14 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom 2 X4 955 BE rev C GA-970-D3 Nvidia GTX 560 A-Data 8GB 
Hard DriveCoolingOSMonitor
Western Digital, Seagate Thermal Take Contact 30 Windows 7 AOC 1920x1080 
KeyboardPowerCaseMouse
Generic Anlix Thermal take  Generic Esenses 
Mouse PadAudio
Generic Onboard 
  hide details  
Reply
post #5 of 11
Thread Starter 
yep chears ill give it a go!
My System
(13 items)
 
  
CPUMotherboard
intel c 2.4ghz asrock P4S61 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboard
intel c 2.4ghz asrock P4S61 
  hide details  
Reply
post #6 of 11
Yeh you are quite limited with that motherboard. If you can get some overclock out of a fsb raise don't forget the 'AGP/PCI fix frequency' you can find it in advaced then chipset configuration in the BIOS., set it to 67/34MHz.

Take the 'DRAM frequency' off 'AUTO' as it will read the modules speed as set by manufacture.

goodluck..
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
3700+Sandiego KACAE DFI LP UT nF4 SLI-D 2 x eVGA6600GT 256Mb 2x512Mb TCCD 
Hard DriveOSKeyboardPower
WD 80Gb SATAII XP Puss Pro Logiteck Multimedia Enermax Noisetaker 485W 
CaseMouse
XG Quantum - modified Logitech MX518 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
3700+Sandiego KACAE DFI LP UT nF4 SLI-D 2 x eVGA6600GT 256Mb 2x512Mb TCCD 
Hard DriveOSKeyboardPower
WD 80Gb SATAII XP Puss Pro Logiteck Multimedia Enermax Noisetaker 485W 
CaseMouse
XG Quantum - modified Logitech MX518 
  hide details  
Reply
post #7 of 11
Thread Starter 
what should i set the dram to? just the rated speed of the 3 sticks of 400mhz 256mb? ive managed to get 2.98ghz buy putting the host frequancy up from 100 to 128 and seems to be pretty stable, it will only go to 129 and start up ok but freezes when windows starts up!
My System
(13 items)
 
  
CPUMotherboard
intel c 2.4ghz asrock P4S61 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboard
intel c 2.4ghz asrock P4S61 
  hide details  
Reply
post #8 of 11
Quote:
Originally Posted by hope4pot
what should i set the dram to? just the rated speed of the 3 sticks of 400mhz 256mb? ive managed to get 2.98ghz buy putting the host frequancy up from 100 to 128 and seems to be pretty stable, it will only go to 129 and start up ok but freezes when windows starts up!
Set them at 266, maybe the voltage is not sufficient, but at least you can oc a bit
My Flying PC
(14 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom 2 X4 955 BE rev C GA-970-D3 Nvidia GTX 560 A-Data 8GB 
Hard DriveCoolingOSMonitor
Western Digital, Seagate Thermal Take Contact 30 Windows 7 AOC 1920x1080 
KeyboardPowerCaseMouse
Generic Anlix Thermal take  Generic Esenses 
Mouse PadAudio
Generic Onboard 
  hide details  
Reply
My Flying PC
(14 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom 2 X4 955 BE rev C GA-970-D3 Nvidia GTX 560 A-Data 8GB 
Hard DriveCoolingOSMonitor
Western Digital, Seagate Thermal Take Contact 30 Windows 7 AOC 1920x1080 
KeyboardPowerCaseMouse
Generic Anlix Thermal take  Generic Esenses 
Mouse PadAudio
Generic Onboard 
  hide details  
Reply
post #9 of 11
My Asrock board also has no V core adjustment but it will let me overclock by 700mhz.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400@4.0 DFI Blood Iron EVGA 9600GT 8 Gigs Gskill pc6400 
Hard DriveOSMonitorKeyboard
Maxtor Diamond Max Windows7 Pro Acer AL2016W yes 
PowerCaseMouseMouse Pad
OCZ 500w SXS Ultra Aluminus yes yes 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400@4.0 DFI Blood Iron EVGA 9600GT 8 Gigs Gskill pc6400 
Hard DriveOSMonitorKeyboard
Maxtor Diamond Max Windows7 Pro Acer AL2016W yes 
PowerCaseMouseMouse Pad
OCZ 500w SXS Ultra Aluminus yes yes 
  hide details  
Reply
post #10 of 11
Thread Starter 
the option for the dram only goes up to 200mhz
My System
(13 items)
 
  
CPUMotherboard
intel c 2.4ghz asrock P4S61 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboard
intel c 2.4ghz asrock P4S61 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Another newbie wanting help