Quote:
|
[ 1/5/2010 7:00:42 AM] I noticed my card`s PCB is different then the one on newegg`s website and it only has 1 crossfire connector.
[BRIAN 1/7/2010 7:07:23 PM] Hi, the newer version of that card will have 1 corssfire connector. Thanks, Brian. (XFX tech support) |
XFX is up to it again :/




See whats wrong with this picture?
One of the cards is a PCB cut version
Original:http://www.newegg.com/Product/ImageG...20Video%20Card
Custom PCB:http://www.newegg.com/Product/ImageG...20Video%20Card
and:http://www.newegg.com/Product/ImageG...20Video%20Card
Also:http://www.newegg.com/Product/ImageG...20Video%20Card
Why this poses a problem:The custom PCB versions (All but the original) do not have support for 3-way crossfire (Only 2 way), have different sizes from the original (XTreme and XXX versions are longer, egg shaped version is shorter) and have different heatsink placements (The egg shaped card has the cooler placement way in the back of the card)
My story:I ordered the original card, waited 12 days, received the card, opened it up, and put it in my motherboard. Now, I noticed a few things..1.was that the DVI ports where red rather than black. 2.that the card was longer that the original. 3.The card only has 1 Crossfire plug. Now I have to send the card out.
^How to tell if you have a custom PCB card^
What happened?:XFX discontinued original PCB 5770's and are now ONLY making their own PCB 5770's. These 5770's are missing a power phase, longer and only support 2 way CF.
Edited by M3T4LM4N222 - 1/28/10 at 10:12pm












